Bioinspired low-frequency material characterisation

New-coded signals, transmitted by high-sensitivity broadband transducers in the 40–200 kHz range, allow subwavelength material discrimination and thickness determination of polypropylene, polyvinylchloride, and brass samples. Frequency domain spectra enable simultaneous measurement of material properties including longitudinal sound velocity and the attenuation constant as well as thickness measurements. Laboratory test measurements agree well with model results, with sound velocity prediction errors of less than 1%, and thickness discrimination of at least wavelength/15. The resolution of these measurements has only been matched in the past through methods that utilise higher frequencies. The ability to obtain the same resolution using low frequencies has many advantages, particularly when dealing with highly attenuating materials. This approach differs significantly from past biomimetic approaches where actual or simulated animal signals have been used and consequently has the potential for application in a range of fields where both improved penetration and high resolution are required, such as nondestructive testing and evaluation, geophysics, and medical physics

PEArL: a systems approach to demonstrating authenticity in information systems design

The process of information systems (IS) design has been dominated by the demands inherent in providing a technical solution to a perceived problem or need. Engineering IS design methods applied in order to satisfy the problem situation tend to have a preoccupation with verifying specifications as being mathematically correct. Diffculties arise when the ideas underpinning verification are extended in an attempt to ‘prove’ the validity of a proposed design for an IS. A pure engineering approach does not facilitate a response to the subjective elements within social situations, which experience has shown to be essential in demonstrating the pertinence of new designs to those concerned. We suggest that, by applying interpretivist systems ideas, it is possible to support concerned individuals in reflecting upon crucial aspects of the inquiry, enabling those individuals to judge the relevance or ‘authenticity’ of the learning, according to their own values and beliefs. The elements of participants, engagement, authority, relationships and learning are suggested as being crucial. These make up the mnemonic PEArL, which is offered as an aide-mémoire for those concerned with IS design

Spatial monitoring of groundwater drawdown and rebound associated with quarry dewatering using automated time-lapse electrical resistivity tomography and distribution guided clustering

Dewatering systems used for mining and quarrying operations often result in highly artificial and complex groundwater conditions, which can be difficult to characterise and monitor using borehole point sampling approaches. Here automated time-lapse electrical resistivity tomography (ALERT) is considered as a means of monitoring subsurface groundwater dynamics associated with changes in the dewatering regime in an operational sand and gravel quarry. We considered two scenarios: the first was unplanned interruption to dewatering due to a pump failure for a period of several days, which involved comparing ALERT monitoring results before and after groundwater rebound; the second involved a planned interruption to pumping over a period of 6 h, for which near-continuous ALERT monitoring of groundwater rebound and drawdown was undertaken. The results of the second test were analysed using distribution guided clustering (DGC) to provide a more quantitative and objective assessment of changes in the subsurface over time. ALERT successfully identified groundwater level changes during both monitoring scenarios. It provided a more useful indication of the rate of water level rise and maximum water levels than piezometer monitoring results. This was due to the piezometers rapidly responding to pressure changes at depth, whilst ALERT/DGC provided information of slower changes associated with the storage and delayed drainage of water within the sediment. By applying DGC we were able to automatically and quantitatively define changes in the resistivity sections, which correlated well with the direct observations of groundwater at site. For ERT monitoring applications that generate numerous time series, the use of DGC could significantly enhance the efficiency of data interpretation, and provide a means of automating groundwater monitoring through assigning alarm thresholds associated with rapid changes in groundwater conditions

Mineralogical Transformations and Soil Development in Shale Across a Latitudinal Climosequence

To investigate factors controlling soil formation, we established a climosequence as part of the Susquehanna-Shale Hills Critical Zone Observatory (SSHCZO) in central Pennsylvania, USA. Sites were located on organic matter-poor, iron-rich Silurian-aged shale in Wales, Pennsylvania, Virginia, Tennessee, Alabama, and Puerto Rico, although this last site is underlain by a younger shale. Across the climosequence, mean annual temperature (MAT) increases from 7 to 24°C and mean annual precipitation (MAP) ranges from 100 to 250 cm. Variations in soil characteristics along the climosequence, including depth, morphology, particle-size distribution, geochemistry, and bulk and clay mineralogy, were characterized to investigate the role of climate in controlling mineral transformations and soil formation. Overall, soil horizonation, depth, clay content, and chemical depletion increase with increasing temperature and precipitation, consistent with enhanced soil development and weathering processes in warmer and wetter locations. Secondary minerals are present at higher concentrations at the warmest sites of the climosequence; kaolinite increases from \u3c5% at northern sites in Wales and Pennsylvania to 30% in Puerto Rico. The deepest observed weathering reaction is plagioclase feldspar dissolution followed by the transformation of chlorite and illite to vermiculite and hydroxy-interlayered vermiculite. Plagioclase, although constituting \u3c12% of the initial shale mineralogy, may be the profile initiating reaction that begins shale bedrock transformation to weathered regolith. Weathering of the more abundant chlorite and illite minerals (∼70% of initial mineralogy), however, are more likely controlling regolith thickness. Climate appears to play a central role in driving soil formation and mineral weathering reactions across the climosequence

Subleading-twist effects in single-spin asymmetries in semi-inclusive deep-inelastic scattering on a longitudinally polarized hydrogen target

Single-spin asymmetries in the semi-inclusive production of charged pions in deep-inelastic scattering from transversely and longitudinally polarized proton targets are combined to evaluate the subleading-twist contribution to the longitudinal case. This contribution is significantly positive for (\pi^+) mesons and dominates the asymmetries on a longitudinally polarized target previously measured by \hermes. The subleading-twist contribution for (\pi^-) mesons is found to be small

Toward an internally consistent astronomical distance scale

Accurate astronomical distance determination is crucial for all fields in astrophysics, from Galactic to cosmological scales. Despite, or perhaps because of, significant efforts to determine accurate distances, using a wide range of methods, tracers, and techniques, an internally consistent astronomical distance framework has not yet been established. We review current efforts to homogenize the Local Group's distance framework, with particular emphasis on the potential of RR Lyrae stars as distance indicators, and attempt to extend this in an internally consistent manner to cosmological distances. Calibration based on Type Ia supernovae and distance determinations based on gravitational lensing represent particularly promising approaches. We provide a positive outlook to improvements to the status quo expected from future surveys, missions, and facilities. Astronomical distance determination has clearly reached maturity and near-consistency.Comment: Review article, 59 pages (4 figures); Space Science Reviews, in press (chapter 8 of a special collection resulting from the May 2016 ISSI-BJ workshop on Astronomical Distance Determination in the Space Age

Star Formation and Dynamics in the Galactic Centre

The centre of our Galaxy is one of the most studied and yet enigmatic places in the Universe. At a distance of about 8 kpc from our Sun, the Galactic centre (GC) is the ideal environment to study the extreme processes that take place in the vicinity of a supermassive black hole (SMBH). Despite the hostile environment, several tens of early-type stars populate the central parsec of our Galaxy. A fraction of them lie in a thin ring with mild eccentricity and inner radius ~0.04 pc, while the S-stars, i.e. the ~30 stars closest to the SMBH (<0.04 pc), have randomly oriented and highly eccentric orbits. The formation of such early-type stars has been a puzzle for a long time: molecular clouds should be tidally disrupted by the SMBH before they can fragment into stars. We review the main scenarios proposed to explain the formation and the dynamical evolution of the early-type stars in the GC. In particular, we discuss the most popular in situ scenarios (accretion disc fragmentation and molecular cloud disruption) and migration scenarios (star cluster inspiral and Hills mechanism). We focus on the most pressing challenges that must be faced to shed light on the process of star formation in the vicinity of a SMBH.Comment: 68 pages, 35 figures; invited review chapter, to be published in expanded form in Haardt, F., Gorini, V., Moschella, U. and Treves, A., 'Astrophysical Black Holes'. Lecture Notes in Physics. Springer 201

Measurement of the B0-anti-B0-Oscillation Frequency with Inclusive Dilepton Events

The $B^0$-$\bar B^0$ oscillation frequency has been measured with a sample of 23 million \B\bar B pairs collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. In this sample, we select events in which both B mesons decay semileptonically and use the charge of the leptons to identify the flavor of each B meson. A simultaneous fit to the decay time difference distributions for opposite- and same-sign dilepton events gives $\Delta m_d = 0.493 \pm 0.012{(stat)}\pm 0.009{(syst)}$ ps$^{-1}$.Comment: 7 pages, 1 figure, submitted to Physical Review Letter

Search for composite and exotic fermions at LEP 2

A search for unstable heavy fermions with the DELPHI detector at LEP is reported. Sequential and non-canonical leptons, as well as excited leptons and quarks, are considered. The data analysed correspond to an integrated luminosity of about 48 pb^{-1} at an e^+e^- centre-of-mass energy of 183 GeV and about 20 pb^{-1} equally shared between the centre-of-mass energies of 172 GeV and 161 GeV. The search for pair-produced new leptons establishes 95% confidence level mass limits in the region between 70 GeV/c^2 and 90 GeV/c^2, depending on the channel. The search for singly produced excited leptons and quarks establishes upper limits on the ratio of the coupling of the excited fermio