Faulting and hydration of the Juan de Fuca plate system

Author Posting. © Elsevier B.V., 2009. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Earth and Planetary Science Letters 284 (2009): 94-102, doi:10.1016/j.epsl.2009.04.013.Multichannel seismic observations provide the first direct images of crustal scale normal faults within the Juan de Fuca plate system and indicate that brittle deformation extends up to ~200 km seaward of the Cascadia trench. Within the sedimentary layering steeply dipping faults are identified by stratigraphic offsets, with maximum throws of 110±10 m found near the trench. Fault throws diminish both upsection and seaward from the trench. Long-term throw rates are estimated to be 13±2 mm/kyr. Faulted offsets within the sedimentary layering are typically linked to larger offset scarps in the basement topography, suggesting reactivation of the normal fault systems formed at the spreading center. Imaged reflections within the gabbroic igneous crust indicate swallowing fault dips at depth. These reflections require local alteration to produce an impedance contrast, indicating that the imaged fault structures provide pathways for fluid transport and hydration. As the depth extent of imaged faulting within this young and sediment insulated oceanic plate is primarily limited to approximately Moho depths, fault- controlled hydration appears to be largely restricted to crustal levels. If dehydration embrittlement is an important mechanism for triggering intermediate-depth earthquakes within the subducting slab, then the limited occurrence rate and magnitude of intraslab seismicity at the Cascadia margin may in part be explained by the limited amount of water imbedded into the uppermost oceanic mantle prior to subduction. The distribution of submarine earthquakes within the Juan de Fuca plate system indicates that propagator wake areas are likely to be more faulted and therefore more hydrated than other parts of his plate system. However, being largely restricted to crustal levels, this localized increase in hydration generally does not appear to have a measurable effect on the intraslab seismicity along most of the subducted propagator wakes at the Cascadia margin.Supported by the Doherty Foundation and the National Science 449 Foundation under grants OCE002488 and OCE0648303 to SMC and MR

Gravity and seismic study of crustal structure along the Juan de Fuca Ridge axis and across pseudofaults on the ridge flanks

Author Posting. © American Geophysical Union, 2011. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 12 (2011): Q05008, doi:10.1029/2010GC003439.Variations in topography and seismic structure are observed along the Juan de Fuca (JdF) Ridge axis and in the vicinity of pseudofaults on the ridge flanks left by former episodes of ridge propagation. Here we analyze gravity data coregistered with multichannel seismic data from the JdF Ridge and flanks in order to better understand the origin of crustal structure variations in this area. The data were collected along the ridge axis and along three ridge-perpendicular transects at the Endeavor, Northern Symmetric, and Cleft segments. Negative Mantle Bouguer anomalies of −21 to −28 mGal are observed at the axis of the three segments. Thicker crust at the Endeavor and Cleft segments is inferred from seismic data and can account for the small differences in axial gravity anomalies (3–7 mGal). Additional low densities/elevated temperatures within and/or below the axial crust are required to explain the remaining axial MBA low at all segments. Gravity models indicate that the region of low densities is wider beneath the Cleft segment. Gravity models for pseudofaults crossed along the three transects support the presence of thinner and denser crust within the pseudofault zones that we attribute to iron-enriched crust. On the young crust side of the pseudofaults, a 10–20 km wide zone of thicker crust is found. Reflection events interpreted as subcrustal sills underlie the zones of thicker crust and are the presumed source for the iron enrichment.This work was supported by the National Science Foundation grants OCE‐0648303 to Lamont‐Doherty Earth Observatory, OCE‐0648923 to Woods Hole Oceanographic Institution

Upper crustal evolution across the Juan de Fuca ridge flanks

Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 9 (2008): Q09006, doi:10.1029/2008GC002085.Recent P wave velocity compilations of the oceanic crust indicate that the velocity of the uppermost layer 2A doubles or reaches ∼4.3 km/s found in mature crust in <10 Ma after crustal formation. This velocity change is commonly attributed to precipitation of low-temperature alteration minerals within the extrusive rocks associated with ridge-flank hydrothermal circulation. Sediment blanketing, acting as a thermal insulator, has been proposed to further accelerate layer 2A evolution by enhancing mineral precipitation. We carried out 1-D traveltime modeling on common midpoint supergathers from our 2002 Juan de Fuca ridge multichannel seismic data to determine upper crustal structure at ∼3 km intervals along 300 km long transects crossing the Endeavor, Northern Symmetric, and Cleft ridge segments. Our results show a regional correlation between upper crustal velocity and crustal age. The measured velocity increase with crustal age is not uniform across the investigated ridge flanks. For the ridge flanks blanketed with a sealing sedimentary cover, the velocity increase is double that observed on the sparsely and discontinuously sedimented flanks (∼60% increase versus ∼28%) over the same crustal age range of 5–9 Ma. Extrapolation of velocity-age gradients indicates that layer 2A velocity reaches 4.3 km/s by ∼8 Ma on the sediment blanketed flanks compared to ∼16 Ma on the flanks with thin and discontinuous sediment cover. The computed thickness gradients show that layer 2A does not thin and disappear in the Juan de Fuca region with increasing crustal age or sediment blanketing but persists as a relatively low seismic velocity layer capping the deeper oceanic crust. However, layer 2A on the fully sedimented ridge-flank sections is on average thinner than on the sparsely and discontinuously sedimented flanks (330 ± 80 versus 430 ± 80 m). The change in thickness occurs over a 10–20 km distance coincident with the onset of sediment burial. Our results also suggest that propagator wakes can have atypical layer 2A thickness and velocity. Impact of propagator wakes is evident in the chemical signature of the fluids sampled by ODP drill holes along the east Endeavor transect, providing further indication that these crustal discontinuities may be sites of localized fluid flow and alteration.This research was supported by National Science Foundation grants OCE-00-02488, OCE-00-02551, and OCE-00- 02600

Variable crustal structure along the Juan de Fuca Ridge : influence of on-axis hot spots and absolute plate motions

Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 9 (2008): Q08001, doi:10.1029/2007GC001922.Multichannel seismic and bathymetric data from the Juan de Fuca Ridge (JDFR) provide constraints on axial and ridge flank structure for the past 4–8 Ma within three spreading corridors crossing Cleft, Northern Symmetric, and Endeavour segments. Along-axis data reveal south-to-north gradients in seafloor relief and presence and depth of the crustal magma lens, which indicate a warmer axial regime to the south, both on a regional scale and within individual segments. For young crust, cross-axis lines reveal differences between segments in Moho two-way traveltimes of 200–300 ms which indicate 0.5–1 km thicker crust at Endeavour and Cleft compared to Northern Symmetric. Moho traveltime anomalies extend beyond the 5–15 km wide axial high and coincide with distinct plateaus, 32 and 40 km wide and 200–400 m high, found at both segments. On older crust, Moho traveltimes are similar for all three segments (∼2100 ± 100 ms), indicating little difference in average crustal production prior to ∼0.6 and 0.7 Ma. The presence of broad axis-centered bathymetric plateau with thickened crust at Cleft and Endeavour segments is attributed to recent initiation of ridge axis-centered melt anomalies associated with the Cobb hot spot and the Heckle melt anomaly. Increased melt supply at Cleft segment upon initiation of Axial Volcano and southward propagation of Endeavour segment during the Brunhes point to rapid southward directed along-axis channeling of melt anomalies linked to these hot spots. Preferential southward flow of the Cobb and Heckle melt anomalies and the regional-scale south-to-north gradients in ridge structure along the JDFR may reflect influence of the northwesterly absolute motion of the ridge axis on subaxial melt distribution.This work was supported by U.S. National Science Foundation grants OCE00-02488 to S.M.C., OCE06-48303 to S.M.C. and M.R.N., OCE-0648923 to J.P.C., and OCE00-02600 to G.M.K. and A.J.H

Seismic reflection images of a near-axis melt sill within the lower crust at the Juan de Fuca ridge

Author Posting. © The Author(s), 2009. This is the author's version of the work. It is posted here by permission of Nature Publishing Group for personal use, not for redistribution. The definitive version was published in Nature 460 (2009): 89-93, doi:10.1038/nature08095.The oceanic crust extends over two thirds of the Earth’s solid surface and is generated along mid-ocean ridges from melts derived from the upwelling mantle. The upper and mid crust are constructed by dyking and seafloor eruptions originating from magma accumulated in mid-crustal lenses at the spreading axis, but the style of accretion of the lower oceanic crust is actively debated. Models based on geological and petrological data from ophiolites propose that the lower oceanic crust is accreted from melt sills intruded at multiple levels between the Moho transition zone (MTZ) and the mid-crustal lens, consistent with geophysical studies that suggest the presence of melt within the lower crust. However, seismic images of molten sills within the lower crust have been elusive. To date only seismic reflections from mid-crustal melt lenses and sills within the MTZ have been described, suggesting that melt is efficiently transported through the lower crust. Here we report deep crustal seismic reflections off the southern Juan de Fuca Ridge that we interpret as originating from a molten sill presently accreting the lower oceanic crust. The sill sits 5-6 km beneath the seafloor and 850-900 m above the MTZ, and it is located 1.4-3.2 km off thespreading axis. Our results provide evidence for the existence of low permeability barriers to melt migration within the lower section of modern oceanic crust forming at intermediate-to-fast spreading rates, as inferred from ophiolite studies.This research was supported by grants form the US NSF

Frozen magma lenses below the oceanic crust

Author Posting. © The Authors, 2005. This is the author's version of the work. It is posted here by permission of Nature Publishing Group for personal use, not for redistribution. The definitive version was published in Nature 436 (2005): 1149-1152, doi:10.1038/nature03944.The Earth's oceanic crust crystallizes from magmatic systems generated at mid-ocean ridges. Whereas a single magma body residing within the mid-crust is thought to be responsible for the generation of the upper oceanic crust, it remains unclear if the lower crust is formed from the same magma body, or if it mainly crystallizes from magma lenses located at the base of the crust. Thermal modelling, tomography, compliance and wide-angle seismic studies, supported by geological evidence, suggest the presence of gabbroic-melt accumulations within the Moho transition zone in the vicinity of fast- to intermediate-spreading centres. Until now, however, no reflection images have been obtained of such a structure within the Moho transition zone. Here we show images of groups of Moho transition zone reflection events that resulted from the analysis of approximately 1,500 km of multichannel seismic data collected across the intermediate-spreading-rate Juan de Fuca ridge. From our observations we suggest that gabbro lenses and melt accumulations embedded within dunite or residual mantle peridotite are the most probable cause for the observed reflectivity, thus providing support for the hypothesis that the crust is generated from multiple magma bodies

Upper crustal structure and axial topography at intermediate spreading ridges : seismic constraints from the southern Juan de Fuca Ridge

Author Posting. © American Geophysical Union, 2005. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 110 (2005): B12104, doi:10.1029/2005JB003630.We use multichannel seismic reflection data to image the upper crustal structure of 0-620 ka crust along the southern Juan de Fuca Ridge (JdFR). The study area comprises two segments spreading at intermediate rate with an axial high morphology with narrow (Cleft) and wide (Vance) axial summit grabens (ASG). Along most of the axis of both segments we image the top of an axial magma chamber (AMC). The AMC along Cleft deepens from south to north, from 2.0 km beneath the RIDGE Cleft Observatory and hydrothermal vents near the southern end of the segment, to 2.3 km at the northern end near the site of the 1980’s eruptive event. Along the Vance segment, the AMC also deepens from south to north, from 2.4 km to 2.7 km. Seismic layer 2A, interpreted as the basaltic extrusive layer, is 250-300 m thick at the ridge axis along the Cleft segment, and 300-350 m thick along the axis of the Vance segment. However off-axis layer 2A is similar in both segments (500-600 m), indicating ~90% and ~60% off-axis thickening at the Cleft and Vance segments, respectively. Half of the thickening occurs sharply at the walls of the ASG, with the remaining thickening occurring within 3-4 km of the ASG. Along the full length of both segments, layer 2A is thinner within the ASG, compared to the ridge flanks. Previous studies argued that the ASG is a cyclic feature formed by alternating periods of magmatism and tectonic extension. Our observations agree with the evolving nature of the ASG. However, we suggest that its evolution is related to large changes in axial morphology produced by small fluctuations in magma supply. Thus the ASG, rather than being formed by excess volcanism, is a rifted flexural axial high. The changes in axial morphology affect the distribution of lava flows along the ridge flanks, as indicated by the pattern of layer 2A thickness. The fluctuations in magma supply may occur at all spreading rates, but its effects on crustal structure and axial morphology are most pronounced along intermediate spreading rate ridges.This study was supported by the National Science Foundation grants OCE-0002551 to Woods Hole Oceanographic Institution, OCE-0002488 to Lamont-Doherty Earth Observatory, and OCE-0002600 to Scripps Institution of Oceanography

2D waveform tomography applied to long-streamer MCS data from the Scotian Slope

International audienceDetailed velocity models of the earth's subsurface can be obtained through waveform tomography. The accuracy of the long-wavelength component of such velocity models, which is the background velocity field, is particularly sensitive to mod-eling low-frequency refracted waves that have long paths through target structures. Thus, field examples primarily have focused on the analysis of long-offset wide-angle data sets collected using autonomous receivers, in which refractions arrive at significantly earlier times than reflections. Modern marine acquisition with long streamers now offers the ability to record refracted waves with high spatial density and uniform source, both in shallow and deep water. We used 2D multichannel seismic (MCS) data acquired with a 9-km-long streamer over the Scotian Slope in water depths of $1600 m. The refracted arrivals, although mostly restricted to far-offset receivers, provided sufficient information to successfully invert for a high-resolution background velocity field. Using a frequency-domain acoustic code over frequencies from 8 to 24 Hz on two crossing profiles, we found that the limited refracted waves can constrain the velocity field above the depth of the turning waves ($1.5 km below seafloor). Several important features were resolved by the waveform velocity model that were not present in the initial traveltime model. In particular, a high-velocity layer at 300 m below the seafloor, interpreted as gas hydrates, was imaged even where a characteristic bottom-simulating reflector was not visible. At 750-m depth, a strong velocity increase of 300 m/s existed beneath a gently dipping reflector along which low-velocity zones, possibly related to gas, were present. Velocity models were highly consistent at the crossing point between the two profiles. The depth extent of the MCS waveform tomography constrained by refractions could be extended by even longer streamers (e.g., 15 km) or by joint inversion with data from ocean-bottom seismographs