444 research outputs found
Evaluation of Single-Cell Cavities Made of Forged Ingot Niobium at Jefferson Lab
Currently, fine grain niobium (Nb) (grain size ∼ 50 µm) and large grain Nb (grain size of a few cm) are being used for the fabrication of superconducting radio frequency (SRF) cavities. Medium grain forged ingot with grain size of a few hundred µm may be beneficial for cost-effectiveness as well as providing better performance for future SRF-based accelerators. Forged ingot Nb with medium grain size is a novel production method to obtain Nb discs used for the fabrication of superconducting radio frequency cavities. We have fabricated two 1.5 GHz single cell cavities made from forged Nb ingot with a residual resistivity ratio of ∼ 100. The cavities were chemically and mechanically polished and heat-treated in the temperature range of 650-1000 C before the rf test. One of the cavities reached an accelerating gradient of ∼34 MV/m with a quality factor Q \u3e 1e10, while the second cavity was limited at 14 MV/m, likely due to a weld defect at the equator
Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity
Large-grain Nb has become a viable alternative to fine-grain Nb for the
fabrication of superconducting radio-frequency cavities. In this contribution
we report the results from a heat treatment study of a large-grain 1.5 GHz
single-cell cavity made of "medium purity" Nb. The baseline surface preparation
prior to heat treatment consisted of standard buffered chemical polishing. The
heat treatment in the range 800 - 1400 C was done in a newly designed vacuum
induction furnace. Q0 values of the order of 2x1010 at 2.0 K and peak surface
magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0-value of
(5+-1)1010 at 2.0 K and Bp = 90 mT was obtained after heat treatment at 1400 C.
This is the highest value ever reported at this temperature, frequency and
field. Samples heat treated with the cavity at 1400 C were analyzed by
secondary ion mass spectrometry, secondary electron microscopy, energy
dispersive X-ray, point contact tunneling and X-ray diffraction and revealed a
complex surface composition which includes titanium oxide, increased carbon and
nitrogen content but reduced hydrogen concentration compared to a non
heat-treated sample
Effect of High Temperature Heat Treatments on the Quality Factor of a Large-grain Superconducting Radio-frequency Niobium Cavity
Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of “medium purity” Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment in the range 800–1400°C was done in a newly designed vacuum induction furnace. Q0 values of the order of 2×1010 at 2.0 K and peak surface magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0 value of (5±1)×1010 at 2.0 K and Bp=90 mT was obtained after heat treatment at 1400°C. This is the highest value ever reported at this temperature, frequency, and field. Samples heat treated with the cavity at 1400°C were analyzed by secondary ion mass spectrometry, x-ray photoelectron spectroscopy, energy dispersive x ray, point-contact tunneling, and x-ray diffraction, and revealed a complex surface composition which includes titanium oxide, increased carbon, and nitrogen content but reduced hydrogen concentration compared to a non-heat-treated sample
Early spatial and temporal validation of MODIS LAI product in the Southern Africa Kalahari
We evaluate the operational MODIS Leaf Area Index (LAI) product using field-sampled data collected at five sites in southern Africa in March 2000. One site (Mongu, Zambia) was sampled monthly throughout the year. All sites were along the International Geosphere Biosphere Programme’s (IGBP) Kalahari Transect, which features progressively lower annual precipitation, and hence, lower vegetation productivity, from north to south. The soils are consistently sandy. At each site, we sampled the vegetation overstory along three 750-m transects using the Tracing Radiation and Architecture in Canopies (TRAC) instrument. The resulting plant area index values were adjusted with ancillary stem area data to estimate LAI. Despite some instrument characterization and production issues in the first year of MODIS operations, our results suggest the first-year MODIS LAI algorithm correctly accommodates structural and phenological variability in semiarid woodlands and savannas, and is accurate to within the uncertainty of the validation approach used here. Limitations of this study and its conclusions are also discussed
Early spatial and temporal validation of MODIS LAI product in the Southern Africa Kalahari
We evaluate the operational MODIS Leaf Area Index (LAI) product using field-sampled data collected at five sites in southern Africa in March 2000. One site (Mongu, Zambia) was sampled monthly throughout the year. All sites were along the International Geosphere Biosphere Programme’s (IGBP) Kalahari Transect, which features progressively lower annual precipitation, and hence, lower vegetation productivity, from north to south. The soils are consistently sandy. At each site, we sampled the vegetation overstory along three 750-m transects using the Tracing Radiation and Architecture in Canopies (TRAC) instrument. The resulting plant area index values were adjusted with ancillary stem area data to estimate LAI. Despite some instrument characterization and production issues in the first year of MODIS operations, our results suggest the first-year MODIS LAI algorithm correctly accommodates structural and phenological variability in semiarid woodlands and savannas, and is accurate to within the uncertainty of the validation approach used here. Limitations of this study and its conclusions are also discussed
Local time and the pricing of time-dependent barrier options
A time-dependent double-barrier option is a derivative security that delivers
the terminal value at expiry if neither of the continuous
time-dependent barriers b_\pm:[0,T]\to \RR_+ have been hit during the time
interval . Using a probabilistic approach we obtain a decomposition of
the barrier option price into the corresponding European option price minus the
barrier premium for a wide class of payoff functions , barrier functions
and linear diffusions . We show that the barrier
premium can be expressed as a sum of integrals along the barriers of
the option's deltas \Delta_\pm:[0,T]\to\RR at the barriers and that the pair
of functions solves a system of Volterra integral
equations of the first kind. We find a semi-analytic solution for this system
in the case of constant double barriers and briefly discus a numerical
algorithm for the time-dependent case.Comment: 32 pages, to appear in Finance and Stochastic
Global data for ecology and epidemiology: a novel algorithm for temporal Fourier processing MODIS data
Background. Remotely-sensed environmental data from earth-orbiting satellites are increasingly used to model the distribution and abundance of both plant and animal species, especially those of economic or conservation importance. Time series of data from the MODerate-resolution Imaging Spectroradiometer (MODIS) sensors on-board NASA's Terra and Aqua satellites offer the potential to capture environmental thermal and vegetation seasonality, through temporal Fourier analysis, more accurately than was previously possible using the NOAA Advanced Very High Resolution Radiometer (AVHRR) sensor data. MODIS data are composited over 8- or 16-day time intervals that pose unique problems for temporal Fourier analysis. Applying standard techniques to MODIS data can introduce errors of up to 30% in the estimation of the amplitudes and phases of the Fourier harmonics. Methodology/Principal Findings. We present a novel spline-based algorithm that overcomes the processing problems of composited MODIS data. The algorithm is tested on artificial data generated using randomly selected values of both amplitudes and phases, and provides an accurate estimate of the input variables under all conditions. The algorithm was then applied to produce layers that capture the seasonality in MODIS data for the period from 2001 to 2005. Conclusions/Significance. Global temporal Fourier processed images of 1 km MODIS data for Middle Infrared Reflectance, day- and night-time Land Surface Temperature (LST), Normalised Difference Vegetation Index (NDVI), and Enhanced Vegetation Index (EVI) are presented for ecological and epidemiological applications. The finer spatial and temporal resolution, combined with the greater geolocational and spectral accuracy of the MODIS instruments, compared with previous multi-temporal data sets, mean that these data may be used with greater confidence in species' distribution modelling
Recommended from our members
SIMS and TEM Analysis of Niobium Bicrystals
The behaviour of interstitial impurities(C,O,N,H) on the Nb surface with respect to grain boundaries may affect cavity performance. Large grain Nb makes possible the selection of bicrystal samples with a well defined grain boundary. In this work, Dynamic SIMS was used to analyze two Nb bicrystal samples, one of them heat treated and the other non heat treated (control). H levels were found to be higher for the non heat treated sample and a difference in the H intensity and sputtering rate was also observed across the grain boundary for both the samples. TEM results showed that the bicrystal interface showed no discontinuity and the oxide layer was uniform across the grain boundary for both the samples. TOF-SIMS imaging was also performed to analyze the distribution of the impurities across the grain boundary in both the samples. C was observed to be segregated along the grain boundary for the control sample, while H and O showed a difference in signal intensity across the grain boundary. Crystal orientation appears to have an important role in the observed sputtering rate and impurity ion signal differences both across the grain boundary and between sample
Ab initio van der Waals interactions in simulations of water alter structure from mainly tetrahedral to high-density-like
The structure of liquid water at ambient conditions is studied in ab initio
molecular dynamics simulations using van der Waals (vdW) density-functional
theory, i.e. using the new exchange-correlation functionals optPBE-vdW and
vdW-DF2. Inclusion of the more isotropic vdW interactions counteracts highly
directional hydrogen-bonds, which are enhanced by standard functionals. This
brings about a softening of the microscopic structure of water, as seen from
the broadening of angular distribution functions and, in particular, from the
much lower and broader first peak in the oxygen-oxygen pair-correlation
function (PCF), indicating loss of structure in the outer solvation shells. In
combination with softer non-local correlation terms, as in the new
parameterization of vdW-DF, inclusion of vdW interactions is shown to shift the
balance of resulting structures from open tetrahedral to more close-packed. The
resulting O-O PCF shows some resemblance with experiment for high-density water
(A. K. Soper and M. A. Ricci, Phys. Rev. Lett., 84:2881, 2000), but not
directly with experiment for ambient water. However, an O-O PCF consisting of a
linear combination of 70% from vdW-DF2 and 30% from experiment on low-density
liquid water reproduces near-quantitatively the experimental O-O PCF for
ambient water, indicating consistency with a two-liquid model with fluctuations
between high- and low-density regions
Global impacts of the 1980s regime shift
Despite evidence from a number of Earth systems that abrupt temporal changes known as regime shifts are important, their nature, scale and mechanisms remain poorly documented and understood. Applying principal component analysis, change-point analysis and a sequential t-test analysis of regime shifts to 72 time series, we confirm that the 1980s regime shift represented a major change in the Earth's biophysical systems from the upper atmosphere to the depths of the ocean and from the Arctic to the Antarctic, and occurred at slightly different times around the world. Using historical climate model simulations from the Coupled Model Intercomparison Project Phase 5 (CMIP5) and statistical modelling of historical temperatures, we then demonstrate that this event was triggered by rapid global warming from anthropogenic plus natural forcing, the latter associated with the recovery from the El Chichón volcanic eruption. The shift in temperature that occurred at this time is hypothesized as the main forcing for a cascade of abrupt environmental changes. Within the context of the last century or more, the 1980s event was unique in terms of its global scope and scale; our observed consequences imply that if unavoidable natural events such as major volcanic eruptions interact with anthropogenic warming unforeseen multiplier effects may occur
- …