1,196 research outputs found
Laser Shock Microformingof Thin Metal Sheets with ns Lasers
Continuous and long-pulse lasers have been used for the forming of metal sheets in macroscopic mechanical applications. However, for the manufacturing of micro-electromechanical systems (MEMS), the use of ns laser pulses provides a suitable parameter matching over an important range of sheet components that, preserving the short interaction time scale required for the predominantly mechanical (shock) induction of deformation residual stresses, allows for the successful processing of components in a medium range of miniaturization without appreciable thermal deformation.. In the present paper, the physics of laser shock microforming and the influence of the different experimental parameters on the net bending angle are presented
On some exceptional cases in the integrability of the three-body problem
We consider the Newtonian planar three--body problem with positive masses
, , . We prove that it does not have an additional first
integral meromorphic in the complex neighborhood of the parabolic Lagrangian
orbit besides three exceptional cases ,
, where the linearized equations are shown to be partially
integrable. This result completes the non-integrability analysis of the
three-body problem started in our previous papers and based of the
Morales-Ramis-Ziglin approach.Comment: 7 page
Multiple roles for UV RESISTANCE LOCUS8 in regulating gene expression and metabolite accumulation in arabidopsis under solar ultraviolet radiation
Photomorphogenic responses triggered by low fluence rates of ultraviolet B radiation (UV-B; 280–315 nm) are mediated by the UV-B photoreceptor UV RESISTANCE LOCUS8 (UVR8). Beyond our understanding of the molecular mechanisms of UV-B perception by UVR8, there is still limited information on how the UVR8 pathway functions under natural sunlight. Here, wild-type Arabidopsis (Arabidopsis thaliana) and the uvr8-2 mutant were used in an experiment outdoors where UV-A (315–400 nm) and UV-B irradiances were attenuated using plastic films. Gene expression, PYRIDOXINE BIOSYNTHESIS1 (PDX1) accumulation, and leaf metabolite signatures were analyzed. The results show that UVR8 is required for transcript accumulation of genes involved in UV protection, oxidative stress, hormone signal transduction, and defense against herbivores under solar UV. Under natural UV-A irradiance, UVR8 is likely to interact with UV-A/blue light signaling pathways to moderate UV-B-driven transcript and PDX1 accumulation. UVR8 both positively and negatively affects UV-A-regulated gene expression and metabolite accumulation but is required for the UV-B induction of phenolics. Moreover, UVR8-dependent UV-B acclimation during the early stages of plant development may enhance normal growth under long-term exposure to solar UV
Laser Shock Microforming of Thin Metal Sheets
Continuous and long-pulse lasers have been used for the forming of metal sheets in macroscopic mechanical applications. However, for the manufacturing of micro-electromechanical systems (MEMS), the applicability of such type of lasers is limited by the long-relaxation-time of the thermal fields responsible for the forming phenomena. As a consequence of such slow relaxation, the final sheet deformation state is attained only after a certain time, what makes the generated internal residual stress fields more dependent on ambient conditions and might make difficult the subsequent assembly process from the point of view of residual stresses due to adjustment. The use of ns laser pulses provides a suitable parameter matching for the laser forming of an important range of sheet components used in MEMS that, preserving the short interaction time scale required for the predominantly mechanic (shock) induction of deformation residual stresses, allows for the successful processing of components in a medium range of miniaturization, particularly important according to its frequent use in such systems. In the present paper, a discussion is presented on the physics of laser shock microforming and the influence of the different effects on the net bending angle. The experimental setup used for the experiments, sample fabrication and experimental results of influence of number of laser pulses on the net bending angle are also presented
The stellar mass ratio of GK Persei
We study the absorption lines present in the spectra of the long-period
cataclysmic variable GK Per during its quiescent state, which are associated
with the secondary star. By comparing quiescent data with outburst spectra we
infer that the donor star appears identical during the two states and the inner
face of the secondary star is not noticeably irradiated by flux from the
accreting regions. We obtain new values for the radial velocity semi-amplitude
of the secondary star, Kk = 120.5 +- 0.7 km/s, a projected rotational velocity,
Vksin i = 61.5 +- 11.8 km/s and consequently a measurement of the stellar mass
ratio of GK Per, q = Mk/Mwd = 0.55 +- 0.21. The inferred white dwarf radial
velocities are greater than those measured traditionally using the wings of
Doppler-broadened emission lines suspected to originate in an accretion disk,
highlighting the unsuitability of emission lines for mass determinations in
cataclysmic variables. We determine mass limits for both components in the
binary, Mk >= 0.48 +- 0.32 Msolar and Mwd >= 0.87 +- 0.24 Msolar.Comment: 8 pages, 8 figures, accepted by MNRA
Band-gap Shift In Cds Semiconductor By Photoacoustic Spectroscopy: Evidence Of A Cubic To Hexagonal Lattice Transition
The band-gap energies of the CdS semiconductor are obtained by a photoacoustic spectroscopy (PAS) technique over a range of temperature of thermal annealing (TTA), in which the evolution of the sample structure is characterized by x-ray diffraction patterns. The PAS experiment gives a set of data for the band-gap shift in the region of the fundamental absorption edge. With increasing TTA the band-gap shift increases up to a critical TTA when its slope decreases in a roughly symmetrical way. It is suggested that at this temperature a cubic to hexagonal-lattice transition occurs.64329129
Enhancement of iron‐based oxygen carriers through alloying with tungsten oxide for chemical looping applications including water splitting
Chemical looping applications offer a variety of options to decarbonise different industrial sectors, such as iron and steel and hydrogen production. Chemical looping with water splitting (CLWS) is a chemical looping technology, which produces H2 while simultaneously capturing CO2. The selection of oxygen carriers (OCs) available to be used in CLWS is finite, due to the thermodynamic limitations of the oxidation with steam for different materials at the relevant process temperatures. Iron-based materials are one of the most widely studied options for chemical looping combustion (CLC), touted for their relative abundance and low cost; likewise, for CLWS, iron is the most promising option. However, when the reduction of iron oxide (Fe2O3) is extended to wüstite (FeO) and iron (Fe), agglomeration and sintering problems are the main challenge for fluidisation.
This work presents iron and tungsten mixed oxides as the OCs for a family of chemical looping applications. The OCs were produced via co-precipitation; performance assessment was conducted in a thermogravimetric analyser and a lab-scale fluidised bed reactor over continuous redox cycles. The use of tungsten combined with iron results in a solid solution of tungsten within the Fe2O3 matrix that produced a more mechanically stable material during operation, which performed well during multiple redox cycles with no apparent decrease in the oxygen transport capacity and showed no apparent agglomeration. Furthermore, materials containing tungsten showed a resistance to carbon deposition, whereas the reference Fe2O3 showed peaks of CO and CO2 during the oxidation period, thus indicating carbon deposition. © 2023 Society of Chemical Industry and John Wiley & Sons, Ltd
GIADA performance during Rosetta mission scientific operations at comet 67P
The Grain Impact Analyser and Dust Accumulator (GIADA) instrument onboard Rosetta studied the dust environment of comet 67P/Churyumov–Gerasimenko from 3.7 au inbound, through perihelion, to 3.8 au outbound, measuring the dust flow and the dynamic properties of individual particles. GIADA is composed of three subsystems: 1) Grain Detection System (GDS); 2) Impact Sensor (IS); and 3) Micro-Balances System (MBS). Monitoring the subsystems’ performance during operations is an important element for the correct calibration of scientific measurements. In this paper, we analyse the GIADA inflight calibration data obtained by internal calibration devices for the three subsystems during the period from 1 August 2014 to 31 October 2015. The calibration data testify a nominal behaviour of the instrument during these fifteen months of mission; the only exception is a minor loss of sensitivity for one of the two GDS receivers, attributed to dust contamination
Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts
One of the key steps to achieve high efficiencies in amorphous/crystalline silicon photovoltaic structures is to design low-ohmic-resistance backcontacts with good passivation in the rear part of the cell. A well known approach to achieve this goal is to use laser-fired contact (LFC) processes in which a metal layer is fired through the dielectric to define good contacts with the semiconductor. However, and despite the fact that this approach has demonstrated to be extremely successful, there is still enough room for process improvement with an appropriate optimization. In this paper, a study focused on the optimal adjustment of the irradiation parameters to produce laser-fired contacts in a-Si:H/c-Si heterojunctionsolarcells is presented. We used samples consisting of crystalline-silicon (c-Si) wafers together with a passivation layer of intrinsic hydrogenated amorphous silicon (a-Si:H(i)) deposited by plasma-enhanced chemical deposition (PECVD). Then, an aluminum layer was evaporated on both sides, the thickness of this layer varied from 0.2 to 1 μm in order to identify the optimal amount of Al required to create an appropriate contact. A q-switched Nd:YVO4laser source, λ = 532 nm, was used to locally fire the aluminum through the thin a-Si:H(i)-layers to form the LFC. The effects of laser fluences were analyzed using a comprehensive morphological and electrical characterization
The association between driving time and unhealthy lifestyles: a cross-sectional, general population study of 386 493 UK Biobank participants
Background:
Driving is a common type of sedentary behaviour; an independent risk factor for poor health. The study explores whether driving is also associated with other unhealthy lifestyle factors.
Methods:
In a cross-sectional study of UK Biobank participants, driving time was treated as an ordinal variable and other lifestyle factors dichotomized into low/high risk based on guidelines. The associations were explored using chi-square tests for trend and binary logistic regression.
Results:
Of the 386 493 participants who drove, 153 717 (39.8%) drove <1 h/day; 140 140 (36.3%) 1 h/day; 60 973 (15.8%) 2 h/day; and 31 663 (8.2%) ≥3 h/day. Following adjustment for potential confounders, driving ≥3 h/day was associated with being overweight/obese (OR = 1.74, 95% CI: 1.64–1.85), smoking (OR = 1.48, 95% CI: 1.37–1.63), insufficient sleep (1.70, 95% CI: 1.61–1.80), low fruit/vegetable intake (OR = 1.26, 95% CI: 1.18–1.35) and low physical activity (OR = 1.05, 95% CI: 1.00–1.11), with dose relationships for the first three, but was not associated with higher alcohol consumption (OR = 0.94, 95% CI: 0.87–1.02).
Conclusions:
Sedentary behaviour, such as driving, is known to have an independent association with adverse health outcomes. It may have additional impact mediated through its effect on other aspects of lifestyle. People with long driving times are at higher risk and might benefit from targeted interventions
- …