The influence of feeding behaviour on growth performance, carcass and meat characteristics of growing pigs

This study investigated the effect of the feeding behaviour on growth performance, and carcass and meat characteristics of 96 barrows fed ad libitum or restrictively with high or low amino acids (AA) diets according to a 2 x 2 factorial design. The feeding behaviour traits were measured with automated feeders. From 86 kg BW, half of the pigs were given feeds with high indispensable (AA) contents, while the other half received feeds with indispensable AA contents reduced by 9% in early finishing (86-118 kg BW) and by 18% in late finishing (118-145 kg BW). Body lipid and protein retentions were estimated from BW and backfat depth measures recorded at the beginning and end of each period. Pigs were slaughtered at 145 kg BW and carcass and meat quality data were recorded. Phenotypic correlations among feeding behaviours, growth performances, and carcass and meat traits were computed from all the data after adjustment for the effects of feeding treatments. As feeding rate was the behavioural trait most highly correlated with performance and carcass traits, the records of each pig were classified into feeding rate tertiles. Then, the data were statistically analysed using a mixed model, which included feed restriction (FR), AA reduction (AAR), the FR x AAR interaction and the feeding rate tertile as fixed factors, and pen as a random factor. Pigs eating faster (52.1 to 118.9 g/min) had significantly greater final body weights (16%), average daily weight gains (27%), estimated protein gains (22%), estimated lipid retention (46%), carcass weights (16%), weights of lean cuts (14%), weights of fat cuts (21%), proportions of fat in the carcass (14%), and 4% lower proportions of carcass lean cuts than pigs eating slowly (12.6 to 38.2 g/min). Manipulating the eating rate, through management or genetic strategies, could affect feed intake and subsequent growth performance, hence carcass quality, but have little influence on feed efficiency

Italian Society of Rheumatology (SIR) recommendations for performing arthrocentesis

Joint fluid aspiration, or arthrocentesis, is one of the most useful and commonly performed procedures for the diagnosis and treatment of rheumatic diseases, but to date no definite guidelines have been published. For this reason, a group of experts of the Italian Society of Rheumatology (SIR) produced evidence based recommendations for performing arthrocentesis. Among them, the most relevant are: a) arthrocentesis is necessary when synovial effusion of unknown origin is present, especially if septic or crystal arthritis is suspected; b) the patient should be clearly informed of the benefits and risks of the procedure in order to give an informed consent; c) ultrasonography should be used to facilitate arthrocentesis in difficult joints; d) fluid evacuation often has a therapeutic effect and facilitates the success of the following intraarticular injection; e) careful skin disinfection and the use of sterile, disposable material is mandatory for avoiding septic complications. Disposable, non sterile gloves should always be used by the operator, mainly for his own protection; f) contraindications are the presence of skin lesions or infections in the area of the puncture; g) the patient's anticoagulant treatment is not a contraindication, providing the therapeutic range is not exceeded; h) joint rest after arthrocentesis is not indicated. Several of these recommendations were based on experts' opinion rather than on published evidence which is scanty

Measurement of the Ds lifetime

We report precise measurement of the Ds meson lifetime. The data were taken by the SELEX experiment (E781) spectrometer using 600 GeV/c Sigma-, pi- and p beams. The measurement has been done using 918 reconstructed Ds. The lifetime of the Ds is measured to be 472.5 +- 17.2 +- 6.6 fs, using K*(892)0K+- and phi pi+- decay modes. The lifetime ratio of Ds to D0 is 1.145+-0.049.Comment: 5 pages, 2 figures submitted to Phys. Lett.

Confirmation of the Double Charm Baryon Xi_cc+ via its Decay to p D+ K-

We observes a signal for the double charm baryon Xi_cc+ in the charged decay mode Xi_cc+ -> p D+ K- to complement the previously reported decay Xi_cc+ -> Lambda_c K- pi+ in data from SELEX, the charm hadro-production experiment (E781) at Fermilab. In this new decay mode we observe an excess of 5.62 events over an expected background estimated by event mixing to be 1.38+/-0.13 events. The Poisson probability that a background fluctuation can produce the apparent signal is less than 6.4E-4. The observed mass of this state is (3518+/-3)MeV/c^2, consistent with the published result. Averaging the two results gives a mass of (3518.7+/-1.7)MeV/c^2. The observation of this new weak decay mode confirms the previous SELEX suggestion that this state is a double charm baryon. The relative branching ratio Gamma(Xi_cc+ -> pD+K-)/Gamma(Xi_cc+ -> Lambda_c K- pi+) = 0.36+/-0.21.Comment: 11 pages, 6 included eps figures. v2 includes improved statistical method to determine significance of observation. Submitted to PL

Spin asymmetry A_1^d and the spin-dependent structure function g_1^d of the deuteron at low values of x and Q^2

We present a precise measurement of the deuteron longitudinal spin asymmetry A_1^d and of the deuteron spin-dependent structure function g_1^d at Q^2 < 1 GeV^2 and 4*10^-5 < x < 2.5*10^-2 based on the data collected by the COMPASS experiment at CERN during the years 2002 and 2003. The statistical precision is tenfold better than that of the previous measurement in this region. The measured A_1^d and g_1^d are found to be consistent with zero in the whole range of x.Comment: 17 pages, 10 figure

Transverse spin effects in hadron-pair production from semi-inclusive deep inelastic scattering

First measurements of azimuthal asymmetries in hadron-pair production in deep-inelastic scattering of muons on transversely polarised ^6LiD (deuteron) and NH_3 (proton) targets are presented. The data were taken in the years 2002-2004 and 2007 with the COMPASS spectrometer using a muon beam of 160 GeV/c at the CERN SPS. The asymmetries provide access to the transversity distribution functions, without involving the Collins effect as in single hadron production. The sizeable asymmetries measured on the NH_ target indicate non-vanishing u-quark transversity and two-hadron interference fragmentation functions. The small asymmetries measured on the ^6LiD target can be interpreted as indication for a cancellation of u- and d-quark transversities.Comment: 13 pages, 4 figures, updated to the published versio

Gluon polarization in the nucleon from quasi-real photoproduction of high-pT hadron pairs

We present a determination of the gluon polarization Delta G/G in the nucleon, based on the helicity asymmetry of quasi-real photoproduction events, Q^2<1(GeV/c)^2, with a pair of large transverse-momentum hadrons in the final state. The data were obtained by the COMPASS experiment at CERN using a 160 GeV polarized muon beam scattered on a polarized 6-LiD target. The helicity asymmetry for the selected events is = 0.002 +- 0.019(stat.) +- 0.003(syst.). From this value, we obtain in a leading-order QCD analysis Delta G/G=0.024 +- 0.089(stat.) +- 0.057(syst.) at x_g = 0.095 and mu^2 =~ 3 (GeV}/c)^2.Comment: 10 pages, 3 figure

Leading order determination of the gluon polarisation from DIS events with high-p_T hadron pairs

We present a determination of the gluon polarisation Delta g/g in the nucleon, based on the longitudinal double-spin asymmetry of DIS events with a pair of large transverse-momentum hadrons in the final state. The data were obtained by the COMPASS experiment at CERN using a 160 GeV/c polarised muon beam scattering off a polarised ^6LiD target. The gluon polarisation is evaluated by a Neural Network approach for three intervals of the gluon momentum fraction x_g covering the range 0.04 < x_g < 0.27. The values obtained at leading order in QCD do not show any significant dependence on x_g. Their average is Delta g/g = 0.125 +/- 0.060 (stat.) +/- 0.063 (syst.) at x_g=0.09 and a scale of mu^2 = 3 (GeV/c)^2.Comment: 13 pages, 6 figures and 3 table

The Spin-dependent Structure Function of the Proton g_1^p and a Test of the Bjorken Sum Rule

The inclusive double-spin asymmetry, A_1^p, has been measured at COMPASS in deepinelastic polarised muon scattering off a large polarised NH3 target. The data, collected in the year 2007, cover the range Q2 > 1 (GeV/c)^2, 0.004 < x < 0.7 and improve the statistical precision of g_1^p(x) by a factor of two in the region x < 0.02. The new proton asymmetries are combined with those previously published for the deuteron to extract the non-singlet spin-dependent structure function g_1^NS(x,Q2). The isovector quark density, Delta_q_3(x,Q2), is evaluated from a NLO QCD fit of g_1^NS. The first moment of Delta_q3 is in good agreement with the value predicted by the Bjorken sum rule and corresponds to a ratio of the axial and vector coupling constants g_A/g_V = 1.28+-0.07(stat)+-0.10(syst).Comment: 12 pages, 5 figure