Electrochemical sensors for worker safety in manufacturing industries

The National Institute for Occupational Safety and Health has attributed most occupational diseases of industrial workers to excessive exposure to dangerous substances. In particular, occupational lung diseases are caused by the inhalation of harmful substances such as dust particles and gases [1]. The use of DPI and periodic health checks for industrial workers certainly reduces risks, but a more effective prevention strategy should include real-time monitoring of physiological parameters [2]. In this context, recent academic and industrial research has focused on the development of smart wearable systems for continuous health monitoring. This has been possible mainly due to significant progress in micro- and nanotechnology and the miniaturization of devices [3]. In such regard, electrochemical sensors represent a promising alternative due to their speed of response, simplicity of operation, and lower cost than traditional methods of diagnosis [4]. This research activity involves the development of a smart mask based on an electrochemical sensor for the non-invasive detection of hydrogen peroxide in exhaled breath. In particular, a higher concentration of this biomarker indicates the onset of oxidative stress, a pathological condition that can lead to more serious diseases, such as asthma and COPD (Chronic Obstructive Pulmonary Disease) [5]. This sensor was fabricated through a sustainable production process, from the CDs at the end of life because their silver layer can be used for its good electrochemical properties. In particular, this layer was peeled off the CD and a three electrodes configuration was given using a laser cutter

In search of hair damage using metabolomics?

YesHair fibres are extraordinary materials, not least because they are exquisitely formed by each of the 5 million or so hair follicles on our bodies and have functions that cross from physiology to psychology, but also because they have well known resistance to degradation as seen in hair surviving from archaeological and historical samples [1]. Hair fibres on the head grow at around 1cm each month, together totalling approximately 12km of growth per person per year. Each fibre is incredibly strong for its small diameter; with one fibre typically holding 100g and together a well-formed ponytail [allegedly] has the collective strength to support the weight of a small elephant! Hair – and from here I mean scalp hair – is under constant scrutiny by each of us; whether it be style, split ends, the first few grey hairs or the collection of hairs in the shower that should be firmly attached - leading to the fear that is hair loss

The first bite: Imaginaries, promotional publics and the laboratory grown burger

In this paper we analyse a 2013 press conference hosting the world’s first tasting of a laboratory grown hamburger. We explore this as a media event: an exceptional performative moment in which common meanings are mobilised and a connection to a shared centre of reality is offered. We develop our own theoretical contribution – the promotional public – to characterise the affirmative and partial patchwork of carefully selected actors invoked during the burger tasting. Our account draws upon three areas of analysis: interview data with the scientists who developed the burger, media analysis of the streamed press conference itself, and media analysis of the social media tail during and following the event. We argue that the call to witness an experiment is a form of promotion but that such promotional material also offers an address that invokes a public with its attendant tensions.The research leading to this publication has received funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement number 288971 (EPINET). Neil Stephens’ involvement has also received the support of the Economic and Social Research Council (ESRC). His work is part of the Research Programme of the ESRC Genomics Network at Cesagen (ESRC Centre for Economic and Social Aspects of Genomics). Neil Stephens’ work was also supported by the Wellcome Trust (WT096541MA) and a visiting scholarship to CGS Centre for Society and Genomics in The Netherlands, May to July 2011. This support is gratefully acknowledge

Effective nebulization of interferon-γ using a novel vibrating mesh.

BACKGROUND: Interferon gamma (IFN-γ) is a clinically relevant immunomodulatory cytokine that has demonstrated significant potential in the treatment and management of respiratory diseases such as tuberculosis and pulmonary fibrosis. As with all large biomolecules, clinical translation is dependent on effective delivery to the disease site and delivery of IFN-γ as an aerosol offers a logical means of drug targeting. Effective localization is often hampered by instability and a lack of safe and efficient delivery systems. The present study sought to determine how effectively IFN-γ can be nebulized using two types of vibrating mesh nebulizer, each with differing mesh architectures, and to investigate the comparative efficiency of delivery of therapeutically active IFN-γ to the lungs. METHODS: Nebulization of IFN-γ was carried out using two different Aerogen vibrating mesh technologies with differing mesh architectures. These technologies represent both a standard commercially available mesh type (Aerogen Solo®) and a new iteration mesh (Photo-defined aperture plate (PDAP®). Extensive aerosol studies (aerosol output and droplet analysis, non-invasive and invasive aerosol therapy) were conducted in line with regulatory requirements and characterization of the stability and bioactivity of the IFN-γ post-nebulization was confirmed using SDS-PAGE and stimulation of Human C-X-C motif chemokine 10 (CXCL 10) also known as IFN-γ-induced protein 10KDa (IP 10) expression from THP-1 derived macrophages (THP-1 cells). RESULTS: Aerosol characterization studies indicated that a significant and reproducible dose of aerosolized IFN-γ can be delivered using both vibrating mesh technologies. Nebulization using both devices resulted in an emitted dose of at least 93% (100% dose minus residual volume) for IFN-γ. Characterization of aerosolized IFN-γ indicated that the PDAP was capable of generating droplets with a significantly lower mass median aerodynamic diameter (MMAD) with values of 2.79 ± 0.29 μm and 4.39 ± 0.25 μm for the PDAP and Solo respectively. The volume median diameters (VMD) of aerosolized IFN-γ corroborated this with VMDs of 2.33 ± 0.02 μm for the PDAP and 4.30 ± 0.02 μm for the Solo. SDS-PAGE gels indicated that IFN-γ remains stable after nebulization by both devices and this was confirmed by bioactivity studies using a THP-1 cell model in which an alveolar macrophage response to IFN-γ was determined. IFN-γ nebulized by the PDAP and Solo devices had no significant effect on the key inflammatory biomarker cytokine IP-10 release from this model in comparison to non-nebulized controls. Here we demonstrate that it is possible to combine IFN-γ with vibrating mesh nebulizer devices and facilitate effective aerosolisation with minimal impact on IFN-γ structure or bioactivity. CONCLUSIONS: It is possible to nebulize IFN-γ effectively with vibrating mesh nebulizer devices without compromising its stability. The PDAP allows for generation of IFN-γ aerosols with improved aerodynamic properties thereby increasing its potential efficiency for lower respiratory tract deposition over current technology, whilst maintaining the integrity and bioactivity of IFN-γ. This delivery modality therefore offers a rational means of facilitating the clinical translation of inhaled IFN-γ

Effect of floor type on the performance, physiological and behavioural responses of finishing beef steers

peer-reviewedBackground:The study objective was to investigate the effect of bare concrete slats (Control), two types of mats [(Easyfix mats (mat 1) and Irish Custom Extruder mats (mat 2)] fitted on top of concrete slats, and wood-chip to simulate deep bedding (wood-chip placed on top of a plastic membrane overlying the concrete slats) on performance, physiological and behavioral responses of finishing beef steers. One-hundred and forty-four finishing steers (503 kg; standard deviation 51.8 kg) were randomly assigned according to their breed (124 Continental cross and 20 Holstein–Friesian) and body weight to one of four treatments for 148 days. All steers were subjected to the same weighing, blood sampling (jugular venipuncture), dirt and hoof scoring pre study (day 0) and on days 23, 45, 65, 86, 107, 128 and 148 of the study. Cameras were fitted over each pen for 72 h recording over five periods and subsequent 10 min sampling scans were analysed. Results: Live weight gain and carcass characteristics were similar among treatments. The number of lesions on the hooves of the animals was greater (P < 0.05) on mats 1 and 2 and wood-chip treatments compared with the animals on the slats. Dirt scores were similar for the mat and slat treatments while the wood-chip treatment had greater dirt scores. Animals housed on either slats or wood-chip had similar lying times. The percent of animals lying was greater for animals housed on mat 1 and mat 2 compared with those housed on concrete slats and wood chips. Physiological variables showed no significant difference among treatments. Conclusions: In this exploratory study, the performance or welfare of steers was not adversely affected by slats, differing mat types or wood-chip as underfoot material

Biomechanical analyses of the performance of Paralympians: From foundation to elite level

Biomechanical analysis of sport performance provides an objective method of determining performance of a particular sporting technique. In particular, it aims to add to the understanding of the mechanisms influencing performance, characterization of athletes, and provide insights into injury predisposition. Whilst the performance in sport of able-bodied athletes is well recognised in the literature, less information and understanding is known on the complexity, constraints and demands placed on the body of an individual with a disability. This paper provides a dialogue that outlines scientific issues of performance analysis of multi-level athletes with a disability, including Paralympians. Four integrated themes are explored the first of which focuses on how biomechanics can contribute to the understanding of sport performance in athletes with a disability and how it may be used as an evidence-based tool. This latter point questions the potential for a possible cultural shift led by emergence of user-friendly instruments. The second theme briefly discusses the role of reliability of sport performance and addresses the debate of two-dimensional and three-dimensional analysis. The third theme address key biomechanical parameters and provides guidance to clinicians, and coaches on the approaches adopted using biomechanical/sport performance analysis for an athlete with a disability starting out, to the emerging and elite Paralympian. For completeness of this discourse, the final theme is based on the controversial issues on the role of assisted devices and the inclusion of Paralympians into able-bodied sport is also presented. All combined, this dialogue highlights the intricate relationship between biomechanics and training of individuals with a disability. Furthermore, it illustrates the complexity of modern training of athletes which can only lead to a better appreciation of the performances to be delivered in the London 2012 Paralympic Games

Motion and pattern cortical potentials in adults with high-functioning autism spectrum disorder

Purpose: Autism spectrum disorder (ASD) is a condition in which visual perception to both static and moving stimuli is altered. The aim of this study was to investigate the early cortical responses of subjects with ASD to simple patterns and moving radial rings using visual evoked potentials (VEPs). Methods: Male ASD participants (n = 9) and typically developing (TD) individuals (n = 7) were matched for full, performance and verbal IQ (p > 0.263). VEPs were recorded to the pattern reversing checks of 50′ side length presented with Michelson contrasts of 98 and 10 % and to the onset of motion—either expansion or contraction of low-contrast concentric rings (33.3 % duty cycle at 10 % contrast). Results: There were no significant differences between groups in the VEPs elicited by pattern reversal checkerboards of high (98 %) or low (10 %) contrast. The ASD group had a significantly larger N160 peak (1.85 x) amplitude to motion onset VEPs elicited by the expansion of radial rings (p = 0.001). No differences were evident in contraction VEP peak amplitudes nor in the latencies of the motion onset N160 peaks. There was no evidence of a response that could be associated with adaptation to the motion stimulus in the interstimulus interval following an expansion or contraction phase of the rings. Conclusion: These data support a difference in processing of motion onset stimuli in this adult high-functioning ASD group compared to the TD group