328 research outputs found
Elastoplastic stress analysis of functionally graded disc under internal pressure– complas XII
The study deals with elastoplastic stress analysis of a hollow disk made of functionally graded materials (FGMs) subjected to an internal pressure. The material properties of disc are assumed to vary radially according to power law function, but Poisson’s ratio is taken constant. Small deformations and a state of plane stress are presumed, and the analysis of disk is based on Von-Mises yield criterion. The materials are assumed to be linear strain hardening, isotropic and not be affected by temperature. Variation of stresses and displacements according to gradient parameters are investigated by using analytical and finite element method. The results show that gradient parameters have an important role in determining the elastoplastic stress of functionally graded disc
Determination of nitrate and nitrite content of Turkish cheeses
The levels of nitrate and nitrite were determined in 185 samples of Turkish cheese having high consumption rate. All cheese samples contained nitrate and its level in Turkish white cheese produced from cow’s and sheep’s milk were found between 0.92 - 22.40 (mean 8.96±4.93) mg/kg and 0.47 - 23.68 (mean 12.35±6.28) mg/kg, respectively. Nitrate level in fresh kasar cheese and mature kasar cheese samples were 0.68 - 17.19 (mean 8.97±5.03) mg/kg and 1.76 - 13.31 (mean 9.45±4.03) mg/kg, respectively. Nitrite was detected 88.11% of cheese samples and mean nitrite values were found between 0.88- 1.64 mg/kg. The highest levels of nitrate and nitrite were determined in the Turkish white cheese samples produced from sheep’s milk. The nitrate content of the examined samples of Turkish cheese could be attributed to both external sources such as contamination by nitrate fertilizers, forage, and agricultural drinking water and addition of nitrate to the cheese milk. It is suggested that stricter control of nitrate in cheese is necessary, and that it should not be used to mask poor hygienic conditions during manufacturing. Hygienic condition must be kept at excellent level in related industrie
What Is the Important Point Related to Follow-Up Sonographic Evaluation for the Developmental Dysplasia of the Hip?
Developmental dysplasia of the hip (DDH) is an important cause of childhood disability. Subluxation or dislocation can be diagnosed through pediatric physical examination; nevertheless, the ultrasonographic examination is necessary in diagnosing certain borderline cases. It has been evaluated routine sonographic examination of 2,444 hips of 1,222 babies to determine differences in both, developmental dysplasia and types of hips, and evaluated their development on the 3-month follow-up. Evaluating the pathologic alpha angles under 59, there was no statistically significant differences between girls and boys in both right (55.57 +/- 3.73) (56.20 +/- 4.01), (p = 0.480), and left (55.79 +/- 3.96) (57.00 +/- 3.84), (p = 0.160) hips on the 45th day of life. Routine sonographic examinations on the 45th day of life revealed that 51 of (66.2%) 77 type 2a right hips were girls and 26 (33.8%) were boys. The number of the right hips that develop into type 1 was 38 (74.5%) for girls and 26 (100%) for boys on the 90th day of life (p = 0.005). A total of 87 type 2a left hips included 64 girls (73.6%) and 23 boys (26.4%). In the 90th day control, 49 right hip of girls (76.6%) and 21 right hip of boys (91.3%) developed into type 1 (p = 0.126). In the assessment of both left and right hips, girls showed a significantly higher frequency in latency and boys showed significantly higher development in the control sonography. A total of 31 girls (2.5%) and 11 boys (0.9%) accounted for a total of 42 (3.4%) cases who showed bilateral type 2a hips in 1,222 infants. On the 90th day control, 26 girls (83.9%) and all 11 boys (100%) developed into type 1 (p = 0.156). The study emphasizes the importance of the sonographic examination on the 90th day of life. Results of the investigation include the data of sonographic screening of DDH on the 45th day, and also stress the importance of the 90th-day control sonography after a close follow-up with physical examination between 45th and 90th days of life
The Role of Soil Beneficial Bacteria in Wheat Production: A Review
Free-living plant growth-promoting rhizobacteria (PGPR) have favourable effect on plant growth, tolerance against stresses and are considered as a promising alternative to inorganic fertilizer for promoting plant growth, yield and quality. PGPR colonize at the plant root, increase germination rates, promote root growth, yield, leaf area, chlorophyll content, nitrogen content, protein content, tolerance to drought, shoot and root weight, and delayed leaf senescence. Several important bacterial characteristics, such as biological nitrogen fixation, solubilization of inorganic phosphate and mineralization of organic phosphate, nutrient uptake, 1-aminocydopropane-1-carboxylic acid (ACC) deaminase activity and production of siderophores and phytohormones, can be assessed as plant growth promotion traits. By efficient use, PGPR is expected to contribute to agronomic efficiency, chiefly by decreasing costs and environmental pollution, by eliminating harmful chemicals. This review discusses various bacteria acting as PGPR, their genetic diversity, screening strategies, working principles, applications for wheat and future aspects in terms of efficiency, mechanisms and the desirable properties. The elucidation of the diverse mechanisms will enable microorganisms developing agriculture further
Fuzzy species limits in Mediterranean gorgonians (Cnidaria, Octocorallia): inferences on speciation processes
The study of the interplay between speciation and hybridization is of primary importance in evolutionary biology. Octocorals are ecologically important species whose shallow phylogenetic relationships often remain to be studied. In the Mediterranean Sea, three congeneric octocorals can be observed in sympatry: Eunicella verrucosa, Eunicella cavolini and Eunicella singularis. They display morphological differences and E.singularis hosts photosynthetic Symbiodinium, contrary to the two other species. Two nuclear sequence markers were used to study speciation and gene flow between these species, through network analysis and Approximate Bayesian Computation (ABC). Shared sequences indicated the possibility of hybridization or incomplete lineage sorting. According to ABC, a scenario of gene flow through secondary contact was the best model to explain these results. At the intraspecific level, neither geographical nor ecological isolation corresponded to distinct genetic lineages in E.cavolini. These results are discussed in the light of the potential role of ecology and genetic incompatibilities in the persistence of species limits.French National Research Agency (ANR) program Adacni (ANR) [ANR-12-ADAP-0016]CNRSHubert Curien 'Tassili' program [12MDU853]CCMAR Strategic Plan from Fundacao para a Ciencia e a Tecnologia-FCT [PEst-C/MAR/LA0015/2011,FEDERinfo:eu-repo/semantics/publishedVersio
Search For Trapped Antihydrogen
We present the results of an experiment to search for trapped antihydrogen
atoms with the ALPHA antihydrogen trap at the CERN Antiproton Decelerator.
Sensitive diagnostics of the temperatures, sizes, and densities of the trapped
antiproton and positron plasmas have been developed, which in turn permitted
development of techniques to precisely and reproducibly control the initial
experimental parameters. The use of a position-sensitive annihilation vertex
detector, together with the capability of controllably quenching the
superconducting magnetic minimum trap, enabled us to carry out a
high-sensitivity and low-background search for trapped synthesised antihydrogen
atoms. We aim to identify the annihilations of antihydrogen atoms held for at
least 130 ms in the trap before being released over ~30 ms. After a three-week
experimental run in 2009 involving mixing of 10^7 antiprotons with 1.3 10^9
positrons to produce 6 10^5 antihydrogen atoms, we have identified six
antiproton annihilation events that are consistent with the release of trapped
antihydrogen. The cosmic ray background, estimated to contribute 0.14 counts,
is incompatible with this observation at a significance of 5.6 sigma. Extensive
simulations predict that an alternative source of annihilations, the escape of
mirror-trapped antiprotons, is highly unlikely, though this possibility has not
yet been ruled out experimentally.Comment: 12 pages, 7 figure
Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires
The management of worn tires is a concern in industrialized countries. The application of crumb rubber
as lightweight aggregate in cement based materials is a green alternative for reusing this material. High
replacements of natural sand by crumb rubber were studied and an air-entraining agent was employed to
ensure a cellular structure in the cement-based composite. The obtained results from tests in fresh state
reveal an improvement in workability. The tests conducted on hardened composite show promise for
constructive applications where thermal and acoustic properties are required. The minimum requirement
of mechanical strength for masonry units was achieved, since compressive strengths varied
between 1 and 10 MPa. Finally, potential applications as a construction material have been highlightedEiras Fernández, JN.; Segovia Rueda, F.; Borrachero Rosado, MV.; Monzó Balbuena, JM.; Bonilla Salvador, MM.; Paya Bernabeu, JJ. (2014). Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires. Materials and Design. 59:550-557. doi:10.1016/j.matdes.2014.03.021S5505575
Polarimetric interferometer for nanoscale positioning applications
International audienceWe propose and demonstrate a displacement control method at the subnanometric scale based on a Michelson interferometer combined with a polarimeter and a phase-locked loop electronic board. Step by step displacements with a step value of 5 nm are presented. A repeatability of 0.47 nm is obtained from back and forth displacements over 1 m range. We show that a residual ellipticity of less than 10° on the polarization state leads to a positioning error of less than 1 nm. Such system could be used over millimeter range displacements in a controlled surrounding environment leading to numerous applications in nanometrology
Much ado about not-very-much? Assessing ten years of German citizenship reform
This article examines the development and impact of German citizenship policy over the past decade. As its point of departure, it takes the 2000 Citizenship Law, which sought to undertake a full-scale reform and liberalisation of access to German membership. The article discusses this law’s content and subsequent amendments, focusing particularly on its quantitative impact, asking why the number of naturalisations has been lower than originally expected. The article outlines current challenges to the law’s structure operation and identifies potential trajectories for its future development
- …