Processing and Properties of Plastic Lumber

Plastic residue can be processed into composites using wood flour, mineral fillers, plant or synthetic fibers to obtain plastic lumber, a substitute material for natural wood. The composition and processing conditions are largely responsible for the final characteristics of the plastic lumber. Factors such as density, particle size and moisture content in the material to be processed require extruders with specific technical characteristics, in order to reduce the residence time of the plastic inside the equipment, maintain a constant feed rate and ensure good degassing and homogenization of the components. The composites can be manufactured using single-screw, co- or counter-rotating conical or parallel twin-screw extruders. Plastic lumber exhibits different physical and mechanical properties from natural wood, including lower stiffness (elastic modulus) and superior weathering resistance

Measurement of the Forward-Backward Asymmetry in the B -> K(*) mu+ mu- Decay and First Observation of the Bs -> phi mu+ mu- Decay

We reconstruct the rare decays $B^+ \to K^+\mu^+\mu^-$, $B^0 \to K^{*}(892)^0\mu^+\mu^-$, and $B^0_s \to \phi(1020)\mu^+\mu^-$ in a data sample corresponding to $4.4 {\rm fb^{-1}}$ collected in $p\bar{p}$ collisions at $\sqrt{s}=1.96 {\rm TeV}$ by the CDF II detector at the Fermilab Tevatron Collider. Using $121 \pm 16$ $B^+ \to K^+\mu^+\mu^-$ and $101 \pm 12$ $B^0 \to K^{*0}\mu^+\mu^-$ decays we report the branching ratios. In addition, we report the measurement of the differential branching ratio and the muon forward-backward asymmetry in the $B^+$ and $B^0$ decay modes, and the $K^{*0}$ longitudinal polarization in the $B^0$ decay mode with respect to the squared dimuon mass. These are consistent with the theoretical prediction from the standard model, and most recent determinations from other experiments and of comparable accuracy. We also report the first observation of the $B^0_s \to \phi\mu^+\mu^- decay and measure its branching ratio${\mathcal{B}}(B^0_s \to \phi\mu^+\mu^-) = [1.44 \pm 0.33 \pm 0.46] \times 10^{-6}$using$27 \pm 6$signal events. This is currently the most rare$B^0_s$ decay observed.Comment: 7 pages, 2 figures, 3 tables. Submitted to Phys. Rev. Let

Measurements of the properties of Lambda_c(2595), Lambda_c(2625), Sigma_c(2455), and Sigma_c(2520) baryons

We report measurements of the resonance properties of Lambda_c(2595)+ and Lambda_c(2625)+ baryons in their decays to Lambda_c+ pi+ pi- as well as Sigma_c(2455)++,0 and Sigma_c(2520)++,0 baryons in their decays to Lambda_c+ pi+/- final states. These measurements are performed using data corresponding to 5.2/fb of integrated luminosity from ppbar collisions at sqrt(s) = 1.96 TeV, collected with the CDF II detector at the Fermilab Tevatron. Exploiting the largest available charmed baryon sample, we measure masses and decay widths with uncertainties comparable to the world averages for Sigma_c states, and significantly smaller uncertainties than the world averages for excited Lambda_c+ states.Comment: added one reference and one table, changed order of figures, 17 pages, 15 figure

Search for heavy bottom-like quarks decaying to an electron or muon and jets in ppˉp\bar{p} collisions at s=1.96\sqrt{s}=1.96 TeV

We report the most sensitive direct search for pair production of fourth-generation bottom-like chiral quarks ($b'$) each decaying promptly to $tW$. We search for an excess of events with an electron or muon, at least five jets (one indentified as due to a $b$ or $c$ quark) and an imbalance of transverse momentum using data from $p\bar{p}$ collisions collected by the CDF II detector at Fermilab with an integrated luminosity of 4.8 fb$^{-1}$. We observe events consistent with background expectation and calculate upper limits on the $b'$ pair production cross section ($\sigma_{b\bar{b'}}\lesssim 30$ fb for $m_{b'}>$375 GeV/$c^2$) and exclude $m_{b'}<372$ \gevcc at 95% confidence level.Comment: For submission to PR

Physics of the HL-LHC, and perspectives at the HE-LH: report from working group 4: opportunities in flavour physics at the HL-LHC and HE-LHC

Motivated by the success of the flavour physics programme carried out over the last decade at the Large Hadron Collider (LHC), we characterize in detail the physics potential of its High-Luminosity and High-Energy upgrades in this domain of physics. We document the extraordinary breadth of the HL/HE-LHC programme enabled by a putative Upgrade II of the dedicated flavour physics experiment LHCb and the evolution of the established flavour physics role of the ATLAS and CMS general purpose experiments. We connect the dedicated flavour physics programme to studies of the top quark, Higgs boson, and direct high-pT searches for new particles and force carriers. We discuss the complementarity of their discovery potential for physics beyond the Standard Model, affirming the necessity to fully exploit the LHC’s flavour physics potential throughout its upgrade eras

First Search for Multijet Resonances in root s=1.96 TeV p(p)over-bar Collisions

We present the first model independent search for three-jet hadronic resonances within multijet events in root s = 1.96 TeV p (p) over bar collisions at the Fermilab Tevatron using the CDF II detector. Pair production of supersymmetric gluinos and squarks with hadronic R-parity violating decays is employed as an example of a new physics benchmark for this signature. Selection criteria based on the kinematic properties of an ensemble of jet combinations within each event help to extract signal from copious QCD background. No significant excess outside the top quark mass window is observed in data with an integrated luminosity of 3.2 fb(-1). We place 95% confidence level limits on the production cross section sigma(p (p) over bar -> XX') X BR((g) over tilde(g) over tilde -> 3 jet + 3 jet) where X, X' = (g) over tilde, (q) over tilde, or (sic), with (q) over tilde, (sic) -> (g) over tilde + jet, as a function of gluino mass, in the range of 77 GeV/c(2) to 240 GeV/c(2)

First Measurement of the Angular Coefficients of Drell-Yan e(+)e(-) Pairs in the Z Mass Region from p(p)over-bar Collisions at root s=1.96 TeV

We report on the first measurement of the angular distributions of final state electrons in p (p) over bar -> gamma*/Z -> e(+)e(-) + X events produced in the Z boson mass region at root s = 1.96 TeV. The data sample collected by the CDF II detector for this result corresponds to 2.1 fb(-1) of integrated luminosity. The angular distributions are studied as a function of the transverse momentum of the electron-positron pair and show good agreement with the Lam-Tung relation, consistent with a spin-1 description of the gluon, and demonstrate that, at high values of the transverse momentum, Z bosons are produced via quark-antiquark annihilation and quark-gluon Compton processes

Search for a Very Light CP-Odd Higgs Boson in Top Quark Decays from p(p)over-bar Collisions at root s=1.96 TeV

We present the results of a search for a very light CP-odd Higgs boson a(1)(0) originating from top quark decays t -> H(+/-)b -> W-+/-(*) a(1)(0)b, and subsequently decaying into tau(+)tau(-). Using a data sample corresponding to an integrated luminosity of 2.7 fb(-1) collected by the CDF II detector in p (p) over bar collisions at 1.96 TeV, we perform a search for events containing a lepton, three or more jets, and an additional isolated track with transverse momentum in the range 3 to 20 GeV/c. Observed events are consistent with background sources, and 95% C.L. limits are set on the branching ratio of t -> H(+/-)b for various masses of H-+/- and a(1)(0)

Uso de resíduo industrial a base de resina fenólica como carga para o polipropileno Use of industrial waste based on phenolic resin as filler for polypropylene

O objetivo deste estudo foi analisar a viabilidade técnica do uso de resíduo industrial composto de resina fenólica, lignocelulose, carbonato de cálcio, talco, mica e negro de fumo como carga para o polipropileno (PP). Compósitos de PP com 10, 15 e 20% em massa do resíduo foram processados em extrusora de rosca dupla e moldados por injeção. Os compósitos moldados foram caracterizados por microscopia eletrônica de varredura (MEV), análises térmicas (DSC e TGA), ensaios mecânicos (tração, flexão e impacto) e ensaio termo-mecânico (HDT). Os compósitos moldados apresentaram partículas do resíduo com tamanhos inferiores a 500 µm dispersas na matriz de polipropileno. As partículas do resíduo atuaram como agentes de nucleação da cristalização do PP. Os compósitos apresentaram maior resistência à degradação térmica, balanço de rigidez e resistência com aumento do módulo sob flexão e diminuição da resistência à tração, manutenção da resistência ao impacto sob entalhe, e aumento da temperatura de distorção ao calor (HDT). O desempenho dos compósitos demonstrou que o resíduo industrial de resina fenólica pode ser empregado como carga funcional para o PP. Além disso, os compósitos desenvolvidos representam uma alternativa para a reciclagem do resíduo industrial de resina fenólica.<br>The aim of this study was to assess the technical feasibility of using industrial waste composed of phenolic resin, lignocellulose, calcium carbonate, talc, mica and carbon black as filler for polypropylene (PP). Composites of PP with 10, 15 and 20 wt% of the waste were processed in a twin-screw extruder followed by injection molding. Molded composites were characterized by scanning electron microscopy (SEM), thermal analyses (DSC and TGA), mechanical tests (tensile, flexural and impact) and thermo-mechanical test (HDT). The composites showed residue particles with sizes less than 500 µm dispersed in the PP matrix. The residue particles acted as nucleating agents for PP crystallization. The composites showed greater thermal degradation resistance as compared to PP. The composites showed a balance of stiffness and mechanical strength with increase of the flexural module and decrease of the tensile strength. The notched impact strength was not altered and the heat distortion temperature (HDT) of the composites was increased as compared to PP. The performance of the composites developed here showed that the industrial waste based on phenolic resin can be used as functional filler for PP. Furthermore, these composites are an alternative for the recycling of the phenolic resin industrial waste