41 research outputs found
Assessing seasonality in the surface urban heat island of London
AbstractThis paper assesses the seasonality of the urban heat island (UHI) effect in the Greater London area (United Kingdom). Combining satellite-based observations and urban boundary layer climate modeling with the UrbClim model, the authors are able to address the seasonality of UHI intensity, on the basis of both land surface temperature (LST) and 2-m air temperature, for four individual times of the day (0130, 1030, 1330, and 2230 local time) and the daily means derived from them. An objective of this paper is to investigate whether the UHI intensities that are based on both quantities exhibit a similar hysteresis-like trajectory that is observed for LST when plotting the UHI intensity against the background temperature. The results show that the UrbClim model can satisfactorily reproduce both the observed urban–rural LSTs and 2-m air temperatures as well as their differences and the hysteresis in the surface UHI. The hysteresis-like seasonality is largely absent in both the observed and modeled 2-m air temperatures, however. A sensitivity simulation of the UHI intensity to incoming solar radiation suggests that the hysteresis of the LST can mainly be attributed to the seasonal variation in incoming solar radiation.</jats:p
Advantages of using a fast urban boundary layer model as compared to a full mesoscale model to simulate the urban heat island of Barcelona
1991-959
A new method to assess fine-scale outdoor thermal comfort for urban agglomerations
In urban areas, high air temperatures and heat stress levels greatly affect human thermal comfort and public health, with climate change further increasing the mortality risks. This study presents a high resolution (100 m) modelling method, including detailed offline radiation calculations, that is able to efficiently calculate outdoor heat stress for entire urban agglomerations for a time period spanning several months. A dedicated measurement campaign was set up to evaluate model performance, yielding satisfactory results. As an example, the modelling tool was used to assess the effectiveness of green areas and water surfaces to cool air temperatures and wet bulb globe temperatures during a typical hot day in the city of Ghent (Belgium), since the use of vegetation and water bodies are shown to be promising in mitigating the adverse effects of urban heat islands and improving thermal comfort. The results show that air temperature reduction is most profound over water surfaces during the afternoon, while open rural areas are coolest during the night. Radiation shading from trees, and to a lesser extent, from buildings, is found to be most effective in reducing wet bulb globe temperatures and improving thermal comfort during the warmest moments of the day
Assessing heat exposure to extreme temperatures in urban areas using the Local Climate Zone classification
Trends of extreme-temperature episodes in cities are increasing (in frequency, magnitude and duration) due to regional climate change in interaction with urban effects. Urban morphologies and thermal properties of the materials used to build them are factors that influence spatial and temporal climate variability and are one of the main reasons for the climatic singularity of cities. This paper presents a methodology to evaluate the urban and peri-urban effect on extreme-temperature exposure in Barcelona (Spain), using the Local Climate Zone (LCZ) classification as a basis, which allows a comparison with other cities of the world characterised using this criterion. LCZs were introduced as input of the high-resolution UrbClim model (100 m spatial resolution) to create daily temperature (median and maximum) series for summer (JJA) during the period 1987 to 2016, pixel by pixel, in order to create a cartography of extremes. Using the relationship between mortality due to high temperatures and temperature distribution, the heat exposure of each LCZ was obtained. Methodological results of the paper show the improvement obtained when LCZs were mapped through a combination of two techniques (land cover-land use maps and the World Urban Database and Access Portal Tools - WUDAPT - method), and the paper proposes a methodology to obtain the exposure to high temperatures of different LCZs in urban and peri-urban areas. In the case of Barcelona, the distribution of temperatures for the 90th percentile (about 3-4 ∘C above the average conditions) leads to an increase in the relative risk of mortality of 80 %
Applications of Models and Tools for Mesoscale and Microscale Thermal Analysis in Mid-Latitude Climate Regions—A Review
Urban analysis at different spatial scales (micro- and mesoscale) of local climate conditions is required to test typical artificial urban boundaries and related climate hazards such as high temperatures in built environments. The multitude of finishing materials and sheltering objects within built environments produce distinct patterns of different climate conditions, particularly during the daytime. The combination of high temperatures and intense solar radiation strongly perturb the environment by increasing the thermal heat stress at the pedestrian level. Therefore, it is becoming common practice to use numerical models and tools that enable multiple design and planning alternatives to be quantitatively and qualitatively tested to inform urban planners and decision-makers. These models and tools can be used to compare the relationships between the micro-climatic environment, the subjective thermal assessment, and the social behaviour, which can reveal the attractiveness and effectiveness of new urban spaces and lead to more sustainable and liveable public spaces. This review article presents the applications of selected environmental numerical models and tools to predict human thermal stress at the mesoscale (e.g., satellite thermal images and UrbClim) and the microscale (e.g., mobile measurements, ENVI-met, and UrbClim HR) focusing on case study cities in mid-latitude climate regions framed in two European research projects.The work leading to these results has received funding from the European Community’s Seventh Framework Programme under Grant Agreement No. 308497, Project RAMSES—Reconciling Adaptation, Mitigation, and Sustainable Development for Cities (2012–2017)
and from the European Union’s H2020 Research and Innovation Programme under Grant Agreement No. 73004
(PUCS/Climate-fit.city).
The APC was funded by the Research Group of Building and Technology, De partment of Civil and Environmental Engineering, Norwegian University of Science and Technolog
Influence of climate change on summer cooling costs and heat stress in urban office buildings
Indoor climatic conditions are strongly influenced by outdoor meteorological conditions. It is thus expected that the combined effect of climate change and the urban heat island effect negatively influences working conditions in urban office buildings. Since office buildings are particularly vulnerable to overheating because of the profound internal heat gains, this is all the more relevant. The overheating in office buildings leads to elevated cooling costs or, because additional work breaks are required by legislation in some countries, productivity losses. We have developed a methodology incorporating urban climate modelling and building energy simulations to assess cooling costs and lost working hours in office buildings, both for current-day and future climate, extending towards the end of the twenty-first century. The methodology is tailored to additionally assess the impact and benefits of adaptation measures, and it is designed to be transferable from one city to another. Results for a prototype building located in three different European cities (Antwerp, Bilbao and London) illustrate the challenge in keeping Western-European office buildings comfortable until the end of the twenty-first century without adaptation measures, and the beneficial effect of adequate adjustments. The results further illustrate the large decreases in cooling costs (up to 30%) caused by the introduction of (external) shading and increased night-time ventilation in actively cooled buildings, and the improvements in working conditions in free-running buildings caused by moving workers to cooler locations and splitting workdays in morning and evening shifts
Spatial Variability of Heat-Related Mortality in Barcelona from 1992-2015: A Case Crossover Study Design.
Numerous studies have demonstrated the relationship between summer temperatures and increased heat-related deaths. Epidemiological analyses of the health effects of climate exposures usually rely on observations from the nearest weather station to assess exposure-response associations for geographically diverse populations. Urban climate models provide high-resolution spatial data that may potentially improve exposure estimates, but to date, they have not been extensively applied in epidemiological research. We investigated temperature-mortality relationships in the city of Barcelona, and whether estimates vary among districts. We considered georeferenced individual (natural) mortality data during the summer months (June-September) for the period 1992-2015. We extracted daily summer mean temperatures from a 100-m resolution simulation of the urban climate model (UrbClim). Summer hot days (above percentile 70) and reference (below percentile 30) temperatures were compared by using a conditional logistic regression model in a case crossover study design applied to all districts of Barcelona. Relative Risks (RR), and 95% Confidence Intervals (CI), of all-cause (natural) mortality and summer temperature were calculated for several population subgroups (age, sex and education level by districts). Hot days were associated with an increased risk of death (RR = 1.13; 95% CI = 1.10-1.16) and were significant in all population subgroups compared to the non-hot days. The risk ratio was higher among women (RR = 1.16; 95% CI= 1.12-1.21) and the elderly (RR = 1.18; 95% CI = 1.13-1.22). Individuals with primary education had similar risk (RR = 1.13; 95% CI = 1.08-1.18) than those without education (RR = 1.10; 95% CI= 1.05-1.15). Moreover, 6 out of 10 districts showed statistically significant associations, varying the risk ratio between 1.12 (95% CI = 1.03-1.21) in Sants-Montjuïc and 1.25 (95% CI = 1.14-1.38) in Sant Andreu. Findings identified vulnerable districts and suggested new insights to public health policy makers on how to develop district-specific strategies to reduce risks
Heat and health in Antwerp under climate change: Projected impacts and implications for prevention
<p><b>BACKGROUND: </b>Excessive summer heat is a serious environmental health problem in several European cities. Heat-related mortality and morbidity is likely to increase under climate change scenarios without adequate prevention based on locally relevant evidence.</p>
<p><b>METHODS: </b>We modelled the urban climate of Antwerp for the summer season during the period 1986-2015, and projected summer daily temperatures for two periods, one in the near (2026-2045) and one in the far future (2081-2100), under the Representative Concentration Pathway (RCP) 8.5. We then analysed the relationship between temperature and mortality, as well as with hospital admissions for the period 2009-2013, and estimated the projected mortality in the near future and far future periods under changing climate and population, assuming alternatively no acclimatization and acclimatization based on a constant threshold percentile temperature.</p>
<p><b>RESULTS: </b>During the sample period 2009-2013 we observed an increase in daily mortality from a maximum daily temperature of 26°C, or the 89th percentile of the maximum daily temperature series. The annual average heat-related mortality in this period was 13.4 persons (95% CI: 3.8-23.4). No effect of heat was observed in the case of hospital admissions due to cardiorespiratory causes. Under a no acclimatization scenario, annual average heat-related mortality is multiplied by a factor of 1.7 in the near future (24.1deaths/year CI 95%: 6.78-41.94) and by a factor of 4.5 in the far future (60.38deaths/year CI 95%: 17.00-105.11). Under a heat acclimatization scenario, mortality does not increase significantly in the near or in the far future.</p>
<p><b>CONCLUSION: </b>These results highlight the importance of a long-term perspective in the public health prevention of heat exposure, particularly in the context of a changing climate, and the calibration of existing prevention activities in light of locally relevant evidence.</p></p
Copernicus for urban resilience in Europe
The urban community faces a significant obstacle in effectively utilising Earth Observation (EO) intelligence, particularly the Copernicus EO program of the European Union, to address the multifaceted aspects of urban sustainability and bolster urban resilience in the face of climate change challenges. In this context, here we present the efforts of the CURE project, which received funding under the European Union’s Horizon 2020 Research and Innovation Framework Programme, to leverage the Copernicus Core Services (CCS) in supporting urban resilience. CURE provides spatially disaggregated environmental intelligence at a local scale, demonstrating that CCS can facilitate urban planning and management strategies to improve the resilience of cities. With a strong emphasis on stakeholder engagement, CURE has identified eleven cross-cutting applications between CCS that correspond to the major dimensions of urban sustainability and align with user needs. These applications have been integrated into a cloud-based platform known as DIAS (Data and Information Access Services), which is capable of delivering reliable, usable and relevant intelligence to support the development of downstream services towards enhancing resilience planning of cities throughout Europe
The urban climate of Ghent, Belgium : a case study combining a high-accuracy monitoring network with numerical simulations
As urban environments have a specific climate that poses extra challenges (e.g. increased heat stress during heat waves), gaining detailed insight into the urban climate is important. This paper presents the high-accuracy MOCCA (MOnitoring the City's Climate and Atmosphere) network, which is monitoring the urban climate of the city of Ghent since July 2016. The study illustrates the complementarity between modelling and observing the urban climate. Two different modelling approaches are used: 1 km resolution runs of the SURFEX land surface model and 100 m resolution runs of the computationally cheaper UrbClim boundary layer model. On the one hand, urban models are able to simulate the spatial variability of the urban climate. As such, these models serve as a tool to help deciding on the locations of the measurement stations. On the other hand, the MOCCA observations are used to validate the high-resolution urban model experiments for the summer (July-August-September) of 2016. Our results demonstrate that the models capture the nighttime intra-urban temperature differences, but they are not able to reproduce the observed daytime temperature differences which are determined by the micro-scale environment