Inheritance of determinants of flower colour in tetraploid roses

The choice of selection breeding for crop improvement in cut roses requires a better understanding of biological mechanisms and knowledge of the inheritance of the major target traits which can lead to new or improved screening methods. Colour is still the most important trait in cut roses. A tetraploid mapping population will be characterized for flower colour, by using colour charts such as the official chart of the Royal Horticultural Society, and additionally, by image analysis and measuring reflectance using a spectrocolorimeter. The genetics of flower colour will be studied. In addition, flower petals of all genotypes will be analysed by HPLC to characterize secondary metabolic components that determine flower colour, such as anthocyanins. The inheritance of these components will also be assessed and compared to that of flower colour. Preliminary results show that the most effective method to quantify colour is by HPLC analysis of the extracted anthocyanins. The highest pelargonidin concentrations occur at relatively low cyanidin concentrations. Absorbance and reflectance measurements illustrate the accumulated effect of all the individual antho¬cyanins present in the peta

Aging and stability of microporous sol-gel-modified ceramic membranes

Aging experiments on microporous sol-gel-derived nonsupported Si02 membranes were performed. Microstructure characterization was performed using nitrogen physisorption. It is found that both chemical aging and thermal aging result in densification of the microstructure, without pore growth. The influence of aging on supported SiO2-modified membranes was investigated using gas permeation and separation experiments. As for the nonsupported materials, some densification takes place. This leads to lower permeation rates, but a strong positive effect was observed on the separation properties. This might be attributed to a decrease of the pore size. Separation factors ranging from 50 to 125 have been measured for H2/CH4 at temperatures in the order of 250°C

Biochar impacts on runoff and soil erosion by water: a systematic global scale meta-analysis

Biochar application to soil has the potential to affect soil and vegetation properties that are key for the processes of runoff and soil erosion. However, both field and pot experiments show a vast range of effects, from strong reductions to strong increases in runoff and/or soil erosion. Therefore, this study aimed to quantify and interpret the impacts of biochar on runoff and soil erosion through the first systematic meta-analysis on this topic. The developed dataset consists of 184 pairwise observations for runoff and soil erosion from 30 independent studies but 8 of which just focused on soil erosion. Overall, biochar application to soil significantly reduced runoff by 25 % and erosion by 16 %. Mitigation of soil erosion in the tropics was approximately three times stronger (30 %) than at temperate latitudes (9 %); erosion reduction in the subtropical zone was 14 %, but not significantly different from either the tropical or temperate zones. Fewer reported field observations for runoff resulted in larger confidence intervals and only the temperate latitudes showed a significant effect (i.e. a 28 % reduction). At topsoil gravimetric biochar concentrations between 0.6 % and 2.5 %, significant reductions occurred in soil erosion, with no effect at lower and higher concentrations. Biochar experiments that included a vegetation cover reduced soil erosion more than twice as much as bare soil experiments, i.e. 27 % vs 12 %, respectively. This suggests that soil infiltration, canopy interception, and soil cohesion mechanisms may have synergistic effects. Soil amended with biochar pyrolyzed at >500 °C was associated with roughly double the erosion reduction than soil amended with biochar produced at 300–500 °C, which potentially could be related to the enhancement of hydrophobicity in the latter case. Our results demonstrate substantial potential for biochar to improve ecosystem services that are affected by increased infiltration and reduced erosion, while mechanistic understanding needs to be improved

The LHCb upgrade I

The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software

Study of the lineshape of the chi(c1) (3872) state

A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations

Measurement of the CKM angle γγ in B±→DK±B^\pm\to D K^\pm and B±→Dπ±B^\pm \to D π^\pm decays with D→KS0h+h−D \to K_\mathrm S^0 h^+ h^-

A measurement of $CP$-violating observables is performed using the decays $B^\pm\to D K^\pm$ and $B^\pm\to D \pi^\pm$, where the $D$ meson is reconstructed in one of the self-conjugate three-body final states $K_{\mathrm S}\pi^+\pi^-$ and $K_{\mathrm S}K^+K^-$ (commonly denoted $K_{\mathrm S} h^+h^-$). The decays are analysed in bins of the $D$-decay phase space, leading to a measurement that is independent of the modelling of the $D$-decay amplitude. The observables are interpreted in terms of the CKM angle $\gamma$. Using a data sample corresponding to an integrated luminosity of $9\,\text{fb}^{-1}$ collected in proton-proton collisions at centre-of-mass energies of $7$, $8$, and $13\,\text{TeV}$ with the LHCb experiment, $\gamma$ is measured to be $\left(68.7^{+5.2}_{-5.1}\right)^\circ$. The hadronic parameters $r_B^{DK}$, $r_B^{D\pi}$, $\delta_B^{DK}$, and $\delta_B^{D\pi}$, which are the ratios and strong-phase differences of the suppressed and favoured $B^\pm$ decays, are also reported

Measurement of CP asymmetries and branching fraction ratios of B− decays to two charm mesons

The $CP$ asymmetries of seven $B^-$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of $9\text{fb}^{-1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a $D^{*0}$ or $D^{*-}_s$ meson are analysed by reconstructing only the $D^0$ or $D^-_s$ decay products. This paper presents the first measurement of $\mathcal{A}^{CP}(B^- \rightarrow D^{*-}_s D^0)$ and $\mathcal{A}^{CP}(B^- \rightarrow D^{-}_s D^{*0})$, and the most precise measurement of the other five $CP$ asymmetries. There is no evidence of $CP$ violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured.The CP asymmetries of seven B$^{−}$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of 9 fb$^{−1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a D$^{*0}$ or ${D}_s^{\ast -}$ meson are analysed by reconstructing only the D$^{0}$ or ${D}_s^{-}$ decay products. This paper presents the first measurement of $\mathcal{A} ^{CP}$(B$^{−}$→${D}_s^{\ast -}$D$^{0}$) and $\mathcal{A} ^{CP}$(B$^{−}$→${D}_s^{-}$D$^{∗0}$), and the most precise measurement of the other five CP asymmetries. There is no evidence of CP violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured.[graphic not available: see fulltext]The $CP$ asymmetries of seven $B^-$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of $9\text{ fb}^{-1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a $D^{*0}$ or $D^{*-}_s$ meson are analysed by reconstructing only the $D^0$ or $D^-_s$ decay products. This paper presents the first measurement of $\mathcal{A}^{CP}(B^- \rightarrow D^{*-}_s D^0)$ and $\mathcal{A}^{CP}(B^- \rightarrow D^{-}_s D^{*0})$, and the most precise measurement of the other five $CP$ asymmetries. There is no evidence of $CP$ violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured

Helium identification with LHCb

The identification of helium nuclei at LHCb is achieved using a method based on measurements of ionisation losses in the silicon sensors and timing measurements in the Outer Tracker drift tubes. The background from photon conversions is reduced using the RICH detectors and an isolation requirement. The method is developed using pp collision data at √(s) = 13 TeV recorded by the LHCb experiment in the years 2016 to 2018, corresponding to an integrated luminosity of 5.5 fb-1. A total of around 105 helium and antihelium candidates are identified with negligible background contamination. The helium identification efficiency is estimated to be approximately 50% with a corresponding background rejection rate of up to O(10^12). These results demonstrate the feasibility of a rich programme of measurements of QCD and astrophysics interest involving light nuclei

Momentum scale calibration of the LHCb spectrometer

For accurate determination of particle masses accurate knowledge of the momentum scale of the detectors is crucial. The procedure used to calibrate the momentum scale of the LHCb spectrometer is described and illustrated using the performance obtained with an integrated luminosity of 1.6 fb-1 collected during 2016 in pp running. The procedure uses large samples of J/ψ → μ + μ - and B+ → J/ψ K + decays and leads to a relative accuracy of 3 × 10-4 on the momentum scale