A mixed-integer programming model for cycle time minimization in assembly line balancing: Using rework stations for performing parallel tasks

[EN] In assembly lines, rework stations are generally used for reprocessing defective items. On the other hand, using rework stations for this purpose only might cause inefficient usage of the resources in this station especially in an assembly line with a low defective rate. In this study, a mixed-integer programming model for cycle time minimization is proposed by considering the use of rework stations for performing parallel tasks. By linearizing the non-linear constraint about parallel tasks using a variate transformation, the model is transformed to a linear-mixed-integer form. In addition to different defective rates, different rework station positions are also considered using the proposed model. The performance of the model is analyzed on several test problems from the related literature.Cavdur, F.; Kaymaz, E. (2020). A mixed-integer programming model for cycle time minimization in assembly line balancing: Using rework stations for performing parallel tasks. International Journal of Production Management and Engineering. 8(2):111-121. https://doi.org/10.4995/ijpme.2020.12368OJS11112182Altekin, F. T., Bayindir, Z. P., & Gümüskaya, V. (2016). Remedial actions for disassembly lines with stochastic task times. Computers & Industrial Engineering, 99, 78-96. https://doi.org/10.1016/j.cie.2016.06.027Anderson, E. J., & Ferris, M. C. (1994). Genetic algorithms for combinatorial optimization: the assemble line balancing problem. ORSA Journal on Computing, 6(2), 161-173. https://doi.org/10.1287/ijoc.6.2.161Askin, R. G., & Zhou, M. (1997). A parallel station heuristic for the mixed-model production line balancing problem. International Journal of Production Research, 35(11), 3095-3106. https://doi.org/ 10.1080/002075497194309Bard, J. F. (1989). Assembly line balancing with parallel workstations and dead time. The International Journal of Production Research, 27(6), 1005-1018. https://doi.org/10.1080/00207548908942604Bartholdi, J. J. (1993). Balancing two-sided assembly lines: a case study. International Journal of Production Research, 31(10), 2447-2461. https://doi.org/10.1080/00207549308956868Battaia, O., & Dolgui, A. (2013). A taxonomy of line balancing problems and their solution approaches. International Journal of Production Economics, 142(2), 259-277. https://doi.org/10.1016/j.ijpe.2012.10.020Baybars, I. (1986). A survey of exact algorithms for the simple assembly line balancing problem. Management science, 32(8), 909-932. https://doi.org/10.1287/mnsc.32.8.909Baykasoglu, A., & Demirkol Akyol, S. (2014). Ergonomic assembly line balancing. Journal of the Faculty of Engineering and Architecture of Gazi University, 29(4), 785-792. https://doi.org/10.17341/gummfd.00296Becker, C., & Scholl, A. (2006). A survey on problems and methods in generalized assembly line balancing. European journal of operational research, 168(3), 694-715. https://doi.org/10.1016/j.ejor.2004.07.023Boysen, N., Fliedner, M., & Scholl, A. (2007). A classification of assembly line balancing problems. European journal of operational research, 183(2), 674-693. https://doi.org/10.1016/j.ejor.2006.10.010Bryton, B. (1954). Balancing of a continuous production line. Master's Thesis, Northwestern University, Evanston.Cercioglu, H., Ozcan, U., Gokcen, H., & Toklu, B. (2009). A simulated annealing approach for parallel assembly line balancing problem. Journal of the Faculty of Engineering and Architecture of Gazi University, 24(2), 331-341.Efe, B., Kremer, G. E. O., & Kurt, M. (2018). Age and gender-based workload constraint for assembly line worker assignment and balancing problem in a textile firm. International Journal of Industrial Engineering, 25(1), 1-17.Ghosh, S., & Gagnon, R. J. (1989). A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems. The International Journal of Production Research, 27(4), 637-670. https://doi.org/10.1080/00207548908942574Gokcen, H., & Baykoc, Ö. F. (1999). A new line remedial policy for the paced lines with stochastic task times. International Journal of Production Economics, 58(2), 191-197. https://doi.org/10.1016/S0925-5273(98)00123-6Gokcen, H., Agpak, K., & Benzer, R. (2006). Balancing of parallel assembly lines. International Journal of Production Economics, 103(2), 600-609. https://doi.org/10.1016/j.ijpe.2005.12.001Guner, B., & Hasgul, S. (2012). U-Type assembly line balancing with ergonomic factors for balance stability. Journal of the Faculty of Engineering and Architecture of Gazi University, 27(2), 407-415.Kaplan, O. (2004). Assembly line balancing with task paralleling. Master's Thesis, METU, Ankara.Kara, Y., Ozguven, C., Yalcın, N., & Atasagun, Y. (2011). Balancing straight and U-shaped assembly lines with resource dependent task times. International Journal of Production Research, 49(21), 6387-6405. https://doi.org/10.1080/00207543.2010.535039Kara, Y., Atasagun, Y., Gokcen, H., Hezer, S., & Demirel, N. (2014). An integrated model to incorporate ergonomics and resource restrictions into assembly line balancing. International Journal of Computer Integrated Manufacturing, 27(11), 997-1007. https://doi.org/10.1080/0951192X.2013.874575Kazemi, S. M., Ghodsi, R., Rabbani, M., & Tavakkoli-Moghaddam, R. (2011). A novel two-stage genetic algorithm for a mixed-model U-line balancing problem with duplicated tasks. The International Journal of Advanced Manufacturing Technology, 55(9-12), 1111-1122. https://doi.org/10.1007/s00170-010-3120-6Kim, Y. K., Kim, Y., & Kim, Y. J. (2000). Two-sided assembly line balancing: a genetic algorithm approach. Production Planning & Control, 11(1), 44-53. https://doi.org/10.1080/095372800232478Kottas, J. F., & Lau, H. S. (1976). A total operating cost model for paced lines with stochastic task times. AIIE Transactions, 8(2), 234-240. https://doi.org/10.1080/05695557608975072Lau, H. S., & Shtub, A. (1987). An exploratory study on stopping a paced line when incompletions occur. IIE transactions, 19(4), 463-467. https://doi.org/10.1080/07408178708975421Lee, T. O., Kim, Y., & Kim, Y. K. (2001). Two-sided assembly line balancing to maximize work relatedness and slackness. Computers & Industrial Engineering, 40(3), 273-292. https://doi.org/10.1016/S0360-8352(01)00029-8Mutlu, O., & Ozgormus, E. (2012). A fuzzy assembly line balancing problem with physical workload constraints. International Journal of Production Research, 50(18), 5281-5291. https://doi.org/10.1080/00207543.2012.709647Ozcan, U., & Toklu, B. (2010). Balancing two-sided assembly lines with sequence-dependent setup times. International Journal of Production Research, 48(18), 5363-5383. https://doi.org/10.1080/00207540903140750Pinto, P., Dannenbring, D. G., & Khumawala, B. M. (1975). A branch and bound algorithm for assembly line balancing with paralleling. The International Journal of Production Research, 13(2), 183-196. https://doi.org/10.1080/00207547508942985Sabuncuoglu, I., Erel, E., & Alp, A. (2009). Ant colony optimization for the single model U-type assembly line balancing problem. International Journal of Production Economics, 120(2), 287-300. https://doi.org/10.1016/j.ijpe.2008.11.017Salveson, M. E. (1955). The assembly line balancing problem. The Journal of Industrial Engineering, 18-25.Scholl, A., & Becker, C. (2006). State-of-the-art exact and heuristic solution procedures for simple assembly line balancing. European Journal of Operational Research, 168(3), 666-693. https://doi.org/10.1016/j.ejor.2004.07.022Shtub, A. (1984). The effect of incompletion cost on line balancing with multiple manning of work stations. The International Journal of Production Research, 22(2), 235-245. https://doi.org/10.1080/00207548408942450Silverman, F. N., & Carter, J. C. (1986). A cost-based methodology for stochastic line balancing with intermittent line stoppages. Management Science, 32(4), 455-463. https://doi.org/10.1287/mnsc.32.4.455Simaria, A. S., & Vilarinho, P. M. (2001). The simple assembly line balancing problem with parallel workstations-a simulated annealing approach. Int J Ind Eng-Theory, 8(3), 230-240.Sivasankaran, P., & Shahabudeen, P. (2014). Literature review of assembly line balancing problems. The International Journal of Advanced Manufacturing Technology, 73(9-12), 1665-1694. https://doi.org/10.1007/s00170-014-5944-ySuer, G. A. (1998). Designing parallel assembly lines. Computers & industrial engineering, 35(3-4), 467-470. https://doi.org/10.1016/S0360-8352(98)00135-1Suwannarongsri, S., & Puangdownreong, D. (2008). Optimal assembly line balancing using tabu search with partial random permutation technique. International Journal of Management Science and Engineering Management, 3(1), 3-18. https://doi.org/10.1080/17509653.2008.10671032Tiacci, L., Saetta, S., & Martini, A. (2006). Balancing mixed-model assembly lines with parallel workstations through a genetic algorithm approach. International Journal of Industrial Engineering, 13(4), 402.Ugurdag, H. F., Rachamadugu, R., & Papachristou, C. A. (1997). Designing paced assembly lines with fixed number of stations. European Journal of Operational Research, 102(3), 488-501. https://doi.org/10.1016/S0377-2217(96)00248-2Wei, N. C., & Chao, I. M. (2011). A solution procedure for type E simple assembly line balancing problem. Computers & Industrial Engineering, 61(3), 824-830. https://doi.org/10.1016/j.cie.2011.05.01

Effects of aqueous artichoke (cynara scolymus) leaf extract on hepatic damage generated by alpha-amanitine

Approximately 90% of mushroom poisoning deaths in the world is caused by types of Amanita phalloides. Alpha-amanitine has a bicyclic octapeptide structure, which is the main structure responsible for these poisoning cases. In the present study, it was aimed to investigate effects of leaf extracts with artichoke extract on this toxicity. In the study, 28 male rats of Sprague-Dawley species were randomized to 4 groups. The groups were designed as control; receiving serum physiological solution of 0.1 mL intraperitoneally (ip), alpha-amanitine; receiving 3 mg/kg single dose ip, artichoke leaf extract; receiving 1.5 g/kg orally for 14 d, and treatment group¸ receiving alpha-amanitine 3 mg/kg single dose ip+artichoke leaf extract 1.5 g/kg orally for 14 d. It was determined that alpha-amanitine increased hepatic malondialdehyde (MDA) levels, and decrease superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), catalase (CAT) activities with decreasing glutathione (GSH) levels. The supplementation with extract with artichoke, decreased MDA levels, it improved antioxidant parameters, and histopathological findings, so it was decided that extract with artichoke juice might be beneficial in alpha-amanitine related hepatic damage

Quantifying the Storm Time Thermospheric Neutral Density Variations Using Model and Observations

Accurate determination of thermospheric neutral density holds crucial importance for satellite drag calculations. The problem is twofold and involves the correct estimation of the quiet time climatology and storm time variations. In this work, neutral density estimations from two empirical and three physicsâ based models of the ionosphereâ thermosphere are compared with the neutral densities along the Challenging Microâ Satellite Payload satellite track for six geomagnetic storms. Storm time variations are extracted from neutral density by (1) subtracting the mean difference between model and observation (bias), (2) setting climatological variations to zero, and (3) multiplying model data with the quiet time ratio between the model and observation. Several metrics are employed to evaluate the model performances. We find that the removal of bias or climatology reveals actual performance of the model in simulating the storm time variations. When bias is removed, depending on event and model, storm time errors in neutral density can decrease by an amount of 113% or can increase by an amount of 12% with respect to error in models with quiet time bias. It is shown that using only average and maximum values of neutral density to determine the model performances can be misleading since a model can estimate the averages fairly well but may not capture the maximum value or vice versa. Since each of the metrics used for determining model performances provides different aspects of the error, among these, we suggest employing mean absolute error, prediction efficiency, and normalized root mean square error together as a standard set of metrics for the neutral density.Plain Language SummaryThermospheric neutral density is the largest source of uncertainty in atmospheric drag calculations. Consequently, mission and maneuver planning, satellite lifetime predictions, collision avoidance, and orbit determination depend on the accurate estimation of the thermospheric neutral density. Thermospheric neutral density varies in different timescales. In short timescales, the largest variations occur due to the geomagnetic storms. Several empirical and physicsâ based models of the ionosphereâ thermosphere system are used for estimating the variations in the neutral density. However, the storm time responses from the models are clouded by the climatology (background variations), upon which the effect of geomagnetic storms is superimposed. In this work, we show that it is critical to use reference levels for the neutral density to extract the true performance of the models for the evaluation of the storm time performances. We demonstrate that mean absolute error, prediction efficiency, and normalized root mean square error should be considered together for the performance evaluations, since each of them provides different aspects of the error.Key PointsUsing the average and maximum values of neutral densities to determine the model performances can be misleadingRemoving the quiet time trend from the neutral density reveals the actual performance of the model in simulating the storm time variationsMean absolute error, prediction efficiency, and normalized root mean square error should be considered together for the evaluationsPeer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/148396/1/swe20816_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148396/2/swe20816-sup-0001-2018SW002033-SI.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148396/3/swe20816.pd

The structure of paranoia in the general population

Background Psychotic phenomena appear to form a continuum with normal experience and beliefs, and may build on common emotional interpersonal concerns. Aims We tested predictions that paranoid ideation is exponentially distributed and hierarchically arranged in the general population, and that persecutory ideas build on more common cognitions of mistrust, interpersonal sensitivity and ideas of reference. Method Items were chosen from the Structured Clinical Interview for DSM-IV Axis II Disorders (SCID-II) questionnaire and the Psychosis Screening Questionnaire in the second British National Survey of Psychiatric Morbidity (n = 8580), to test a putative hierarchy of paranoid development using confirmatory factor analysis, latent class analysis and factor mixture modelling analysis. Results Different types of paranoid ideation ranged in frequency from less than 2% to nearly 30%. Total scores on these items followed an almost perfect exponential distribution (r = 0.99). Our four a priori first-order factors were corroborated (interpersonal sensitivity; mistrust; ideas of reference; ideas of persecution). These mapped onto four classes of individual respondents: a rare, severe, persecutory class with high endorsement of all item factors, including persecutory ideation; a quasi-normal class with infrequent endorsement of interpersonal sensitivity, mistrust and ideas of reference, and no ideas of persecution; and two intermediate classes, characterised respectively by relatively high endorsement of items relating to mistrust and to ideas of reference. Conclusions The paranoia continuum has implications for the aetiology, mechanisms and treatment of psychotic disorders, while confirming the lack of a clear distinction from normal experiences and processes

Cost-effectiveness of nurse-led self-help for recurrent depression in the primary care setting: design of a pragmatic randomized trial

<p>Abstract</p> <p>Background</p> <p>Major Depressive Disorder is a leading cause of disability, tends to run a recurrent course and is associated with substantial economic costs due to increased healthcare utilization and productivity losses. Interventions aimed at the prevention of recurrences may reduce patients' suffering and costs. Besides antidepressants, several psychological treatments such as preventive cognitive therapy (PCT) are effective in the prevention of recurrences of depression. Yet, many patients find long-term use of antidepressants unattractive, do not want to engage in therapy sessions and in the primary care setting psychologists are often not available. Therefore, it is important to study whether PCT can be used in a nurse-led self-help format in primary care. This study sets out to test the hypothesis that usual care plus nurse-led self-help for recurrent depression in primary care is feasible, acceptable and cost-effective compared to usual care only.</p> <p>Design</p> <p>Patients are randomly assigned to ‘nurse-led self-help treatment plus usual care’ (134 participants) or ‘usual care’ (134 participants). Randomisation is stratified according to the number of previous episodes (2 or 3 previous episodes versus 4 or more). The primary clinical outcome is the cumulative recurrence rate of depression meeting DSM-IV criteria as assessed by the Structured-Clinical-Interview-for-DSM-IV- disorders at one year after completion of the intervention. Secondary clinical outcomes are quality of life, severity of depressive symptoms, co-morbid psychopathology and self-efficacy. As putative effect-moderators, demographic characteristics, number of previous episodes, type of treatment during previous episodes, age of onset, self-efficacy and symptoms of pain and fatigue are assessed. Cumulative recurrence rate ratios are obtained under a Poisson regression model. Number-needed-to-be-treated is calculated as the inverse of the risk-difference. The economic evaluation is conducted from a societal perspective, both as a cost-effectiveness analysis (costs per depression free survival year) and as a cost-utility analysis (costs per quality adjusted life-year).</p> <p>Discussion</p> <p>The purpose of this paper is to outline the rationale and design of a nurse-led, cognitive therapy based self-help aimed at preventing recurrence of depression in a primary care setting. Only few studies have focused on psychological self-help interventions aimed at the prevention of recurrences in primary care patients.</p> <p>Trial registration</p> <p>NTR3001 (<url>http://www.trialregister.nl</url>)</p

MESSENGER and Mariner 10 flyby observations of magnetotail structure and dynamics at Mercury

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94896/1/jgra21525.pd

Disrupting the rhythm of depression: design and protocol of a randomized controlled trial on preventing relapse using brief cognitive therapy with or without antidepressants

Background: Maintenance treatment with antidepressants is the leading strategy to prevent relapse and recurrence in patients with recurrent major depressive disorder (MDD) who have responded to acute treatment with antidepressants (AD). However, in clinical practice most patients (up to 70-80%) are not willing to take this medication after remission or take too low dosages. Moreover, as patients need to take medication for several years, it may not be the most cost-effective strategy. The best established effective and available alternative is brief cognitive therapy (CT). However, it is unclear whether brief CT while tapering antidepressants (AD) is an effective alternative for long term use of AD in recurrent depression. In addition, it is unclear whether the combination of AD to brief CT is beneficial.Methods/design: Therefore, we will compare the effectiveness and cost-effectiveness of brief CT while tapering AD to maintenance AD and the combination of CT with maintenance AD. In addition, we examine whether the prophylactic effect of CT was due to CT tackling illness related risk factors for recurrence such as residual symptoms or to its efficacy to modify presumed vulnerability factors of recurrence (e.g. rigid explicit and/or implicit dysfunctional attitudes). This is a multicenter RCT comparing the above treatment scenarios. Remitted patients on AD with at least two previous depressive episodes in the past five years (n = 276) will be recruited. The primary outcome is time related proportion of depression relapse/recurrence during minimal 15 months using DSM-IV-R criteria as assessed by the Structural Clinical Interview for Depression. Secondary outcome: economic evaluation (using a societal perspective) and number, duration and severity of relapses/recurrences.Discussion: This will be the first trial to investigate whether CT is effective in preventing relapse to depression in recurrent depression while tapering antidepressant treatment compared to antidepressant treatment alone and the combination of both. In addition, we explore explicit and implicit mediators of CT.Trial registration: Netherlands Trial Register (NTR): NTR1907

Packages of Care for Depression in Low- and Middle-Income Countries

In the first in a series of six articles on packages of care for mental disorders in low- and middle-income countries, Neerja Chowdary and colleagues discuss the treatment of depression

The Earth: Plasma Sources, Losses, and Transport Processes

This paper reviews the state of knowledge concerning the source of magnetospheric plasma at Earth. Source of plasma, its acceleration and transport throughout the system, its consequences on system dynamics, and its loss are all discussed. Both observational and modeling advances since the last time this subject was covered in detail (Hultqvist et al., Magnetospheric Plasma Sources and Losses, 1999) are addressed