Light Scattering and Gloss of an Experimental Quartz-filled Composite

For samples of polymethylmethacrylate with and without quartz filler, the inverse of the contrast-gloss ratio is shown to be related to surface roughness and to the optical scattering coefficient. This finding adds to the importance of optical scattering, which has been widely studied because of its relation to color and translucency of materials. Furthermore, optical scattering by composite fillers is shown to be linearly related to the concentration of the filler material within the range of concentrations studied. Quartz fillers were incorporated at concentrations from 5 to 20 weight percent and were short fibers or granular powder, with the granular particles ranging in median equivalent spherical diameter from 15 to 3.3 μm. The efficiency of optical scattering for the granular quartz filler increased as the size of the filler decreased.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68026/2/10.1177_00220345860650060501.pd

Interpreting multiple sulfur isotope signals in modern anoxic sediments using a full diagenetic model (California-Mexico margin: Alfonso basin)

Recent studies targeting the metabolic, physiological, and biochemical controls of sulfur isotope fractionation in microbial systems have drawn linkages between results from culture experiments and the sulfur isotope signatures observed in natural environments. Several of those studies have used newer techniques to explore the minor isotope (33S and 36S) variability in those systems, and also have attempted to place them in an ecophysiological context. Sparingly few have incorporated this newfound understanding of minor isotope behavior into natural systems (sediment pore waters, water columns) and none of them have refined existing isotope-dependent reaction-transport models to explicitly include 33S. In this study, we construct a three-isotope (32S, 33S, and 34S) reaction-transport model of pore water sulfate for a well-characterized sedimentary system within the California-Mexico Margin (Alfonso Basin). An additional goal is placing recent laboratory culture work into a natural, physical context. The model first reproduces the measured bulk geochemical characteristics of the pore water profiles of [SO4 2], [CH4], dissolved inorganic carbon ([DIC]), and [Ca2]—and predicts bulk (non-isotope-specific but depth-dependent) rates of sulfate reduction. Next, the model uses those depth-dependent bulk rates, in combination with empirically calibrated fractionation factors, to explain the minor isotope characteristics (34S and 33S values) of the 0 to 40 cm pore water SO4 2. The down core, isotopic evolution of pore water sulfate requires a large fractionation associated with sulfate reduction (34 SR 70 5) that appears to be independent of bulk rate, but in line with low temperature thermodynamic predictions. The minor isotope characteristics (33 SR 0.5130) are also independent of rate and fall within the range expected from microbial calibrations, but differ from minor isotope predictions of thermodynamic equilibrium. The high value of 34 SR raises key questions in relating the physiological state of marine microorganisms relative to their laboratory counterparts, as well as point toward exceedingly low metabolic rates in natural marine sediments

The Detection of Incipient Caries with Tracer Dyes

The purpose of this study was to determine the increase in color contrast produced by the use of a tracer dye in detection of incipient caries lesions with transillumination. Twenty four caries-free first premolars were immersed in an acid gelatin for production of artificial incipient caries lesions. After the lesions had developed, these teeth were photographed by transillumination. Two photographs were taken of each tooth. The first photograph showed the lesion without dye. A blue tracer dye was then added and absorbed by the lesion, and a second photograph was taken. The data on the color difference were obtained by use of a reflectance colorimeter and showed a four-fold increase between the lesion and surrounding area with the dye. A two-way analysis of variance was used for the statistical interpretation. The color difference between the lesion without the dye and then with the dye was significant. The use of the blue tracer dye, therefore, significantly increased the contrast in the images of the artificial incipient lesions.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68289/2/10.1177_00220345890680021101.pd

The Color Accuracy of the Kubelka-Munk Theory for Various Colorants in Maxillofacial Prosthetic Material

The reflectance model developed by Kubelka and Munk was evaluated for agreement in color prediction of thick pigmented samples and for linearity of optical absorption and scattering coefficients with concentration of colorant in maxillofacial elastomer. The colorants tested were generic opacifiers, dry mineral earth pigments, and fibrous colorants. Significant linear relationships were commonly found between the optical coefficients and the concentration of the colorants. These relationships indicated occasional optical interaction between the colorants and the elastomer. Color differences between theoretical and observed colors of the thick samples averaged 2.96, 3.47, and 1.60 for the opacifiers, mineral earth pigments, and fibrous colorants, respectively, when measured using the CIELAB uniform-color space. The agreement between theoretical and observed colors was significantly closer for the fibrous colorants than for the dry mineral earth pigments of the same labeled color.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67968/2/10.1177_00220345870660090601.pd

Effects of built environment on walking among Hong Kong older adults

 Key Messages1. Reliable and valid intervieweradministered questionnaires were developed to investigate associations of perceived neighbourhood attributes of Hong Kong older adults with their walking for transportation and recreation.2. Access to and availability of different types of services and destinations, provision offacilities for resting/sitting in the neighbourhood, and easy access to/from residentialbuildings may help maintain an active lifestyle by facilitating walking for transport in the neighbourhood.3. Access to services, indoor places for walking, environmental aesthetics, low traffic, and absence of physical barriers may promote recreational walking

Eureka and beyond: mining's impact on African urbanisation

This collection brings separate literatures on mining and urbanisation together at a time when both artisanal and large-scale mining are expanding in many African economies. While much has been written about contestation over land and mineral rights, the impact of mining on settlement, notably its catalytic and fluctuating effects on migration and urban growth, has been largely ignored. African nation-states’ urbanisation trends have shown considerable variation over the past half century. The current surge in ‘new’ mining countries and the slow-down in ‘old’ mining countries are generating some remarkable settlement patterns and welfare outcomes. Presently, the African continent is a laboratory of national mining experiences. This special issue on African mining and urbanisation encompasses a wide cross-section of country case studies: beginning with the historical experiences of mining in Southern Africa (South Africa, Zambia, Zimbabwe), followed by more recent mineralizing trends in comparatively new mineral-producing countries (Tanzania) and an established West African gold producer (Ghana), before turning to the influence of conflict minerals (Angola, the Democratic Republic of Congo and Sierra Leone)

Applications of electrified dust and dust devil electrodynamics to Martian atmospheric electricity

Atmospheric transport and suspension of dust frequently brings electrification, which may be substantial. Electric fields of 10 kVm-1 to 100 kVm-1 have been observed at the surface beneath suspended dust in the terrestrial atmosphere, and some electrification has been observed to persist in dust at levels to 5 km, as well as in volcanic plumes. The interaction between individual particles which causes the electrification is incompletely understood, and multiple processes are thought to be acting. A variation in particle charge with particle size, and the effect of gravitational separation explains to, some extent, the charge structures observed in terrestrial dust storms. More extensive flow-based modelling demonstrates that bulk electric fields in excess of 10 kV m-1 can be obtained rapidly (in less than 10 s) from rotating dust systems (dust devils) and that terrestrial breakdown fields can be obtained. Modelled profiles of electrical conductivity in the Martian atmosphere suggest the possibility of dust electrification, and dust devils have been suggested as a mechanism of charge separation able to maintain current flow between one region of the atmosphere and another, through a global circuit. Fundamental new understanding of Martian atmospheric electricity will result from the ExoMars mission, which carries the DREAMS (Dust characterization, Risk Assessment, and Environment Analyser on the Martian Surface)-MicroARES (Atmospheric Radiation and Electricity Sensor) instrumentation to Mars in 2016 for the first in situ measurements

Search for Higgs bosons decaying to tautau pairs in ppbar collisions at sqrt(s) = 1.96 TeV

We present a search for the production of neutral Higgs bosons decaying into tautau pairs in ppbar collisions at a center-of-mass energy of 1.96 TeV. The data, corresponding to an integrated luminosity of 5.4 fb-1, were collected by the D0 experiment at the Fermilab Tevatron Collider. We set upper limits at the 95% C.L. on the product of production cross section and branching ratio for a scalar resonance decaying into tautau pairs, and we then interpret these limits as limits on the production of Higgs bosons in the minimal supersymmetric standard model (MSSM) and as constraints in the MSSM parameter space.Comment: 7 pages, 5 figures, submitted to PL

Measurement of three-jet differential cross sections d sigma-3jet / d M-3jet in p anti-p collisions at sqrt(s)=1.96 TeV

We present the first measurement of the inclusive three-jet differential cross section as a function of the invariant mass of the three jets with the largest transverse momenta in an event in p anti-p collisions at sqrt(s) = 1.96 TeV. The measurement is made in different rapidity regions and for different jet transverse momentum requirements and is based on a data set corresponding to an integrated luminosity of 0.7 fb^{-1} collected with the D0 detector at the Fermilab Tevatron Collider. The results are used to test the three-jet matrix elements in perturbative QCD calculations at next-to-leading order in the strong coupling constant. The data allow discrimination between parametrizations of the parton distribution functions of the proton.Comment: 10 pages, 4 figures, 2 tables, submitted to Phys. Lett. B, corrected chi2 values for NNPD

Measurements of inclusive W+jets production rates as a function of jet transverse momentum in ppbar collisions at sqrt{s}=1.96 TeV

This Letter describes measurements of inclusive W (--> e nu) + n jet cross sections (n = 1-4), presented as total inclusive cross sections and differentially in the nth jet transverse momentum. The measurements are made using data corresponding to an integrated luminosity of 4.2 fb-1 collected by the D0 detector at the Fermilab Tevatron Collider, and achieve considerably smaller uncertainties on W +jets production cross sections than previous measurements. The measurements are compared to next-to-leading order perturbative QCD (pQCD) calculations in the n =1-3 jet multiplicity bins and to leading order pQCD calculations in the 4-jet bin. The measurements are generally in agreement with pQCD predictions, although certain regions of phase space are identified where the calculations could be improved