Characterization of relativistic electron bunch duration and travelling wave structure phase velocity based on momentum spectra measurements on the ARES linac at DESY

The ARES linac at DESY aims to generate and characterize ultrashort electron bunches (fs to sub-fs duration) with high momentum and arrival time stability for the purpose of applications related to accelerator R&D, e.g. development of advanced and compact diagnostics and accelerating structures, test of new accelerator components, medical applications studies, machine learning, etc. During its commissioning phase, the bunch duration characterization of the electron bunches generated at ARES has been performed with an RF-phasing technique relying on momentum spectra measurements, using only common accelerator elements (RF accelerating structures and magnetic spectrometers). The sensitivity of the method allowed highlighting different response times for Mo and Cs2Te cathodes. The measured electron bunch duration in a wide range of machine parameters shows excellent agreement overall with the simulation predictions, thus demonstrating a very good understanding of the ARES operation on the bunch duration aspect. The importance of a precise in-situ experimental determination of the phase velocity of the first travelling wave accelerating structure after the electron source, for which we propose a simple new beam-based method precise down to sub-permille variation respective to the speed of light in vacuum, is emphasized for this purpose. A minimum bunch duration of 20 fs rms, resolution-limited by the space charge forces, is reported. This is, to the best of our knowledge, around 4 times shorter than what has been previously experimentally demonstrated based on RF-phasing techniques with a single RF structure. The present study constitutes a strong basis for future time characterization down to the sub-fs level at ARES, using dedicated X-band transverse deflecting structures.Comment: 17 pages, 11 figures. To be submitted to Physical Review Accelerators and Beam

Horizon 2020 EuPRAXIA design study

The Horizon 2020 Project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") is preparing a conceptual design report of a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The accelerator facility will be based on a laser and/or a beam driven plasma acceleration approach and will be used for photon science, high-energy physics (HEP) detector tests, and other applications such as compact X-ray sources for medical imaging or material processing. EuPRAXIA started in November 2015 and will deliver the design report in October 2019. EuPRAXIA aims to be included on the ESFRI roadmap in 2020

EuPRAXIA - A compact, cost-efficient particle and radiation source

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure

Erratum to: EuPRAXIA Conceptual Design Report – Eur. Phys. J. Special Topics 229, 3675-4284 (2020), https://doi.org/10.1140/epjst/e2020-000127-8

International audienceThe online version of the original article can be found at http://https://doi.org/10.1140/epjst/e2020-000127-8</A

EuPRAXIA - A Compact, Cost-Efficient Particle and Radiation Source

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA (“European Plasma Research Accelerator with eXcellence In Applications”) aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure

Development of a Beam Profile Monitor based on Silicon Strip Sensors for Low-Charge Electron Beams

Novel accelerator techniques such as dielectric laser acceleration (DLA) will be studied at the SINBAD facility (DESY Hamburg) using the ARES electron linac. Due to the low charge of the accelerated beams, charge densities below 1 aC per square micron are expected at the spectrometer screen, which are challenging to measure with conventional techniques used in multi-pC accelerators. Therefore, a dedicated beam profile monitor, based on silicon strip sensors from the ATLAS inner tracker upgrade, was developed to measure these distributions with a sufficient spatial resolution of around 100 micron. Here, the design of the device and experimental tests with a prototype are presented

Experimental Demonstration of Novel Beam Characterization using a Polarizable X-Band Transverse Deflection Structure

The PolariX TDS (Polarizable X‑Band Transverse Deflection Structure) is an innovative TDS‑design operating in the X‑band frequency‑range. The design gives full control of the streaking plane, which can be tuned in order to characterize the projections of the beam distribution onto arbitrary transverse axes. This novel feature opens up new opportunities for detailed characterization of the electron beam. In this paper we present first measurements of the Polarix TDS at the FLASHForward beamline at DESY, including three‑dimensional reconstruction of the charge‑density distribution of the bunch and slice emittance measurements in both transverse directions. The experimental results open the path toward novel and more extensive beam characterization in the direction of multi‑dimensional‑beam‑phase‑space reconstruction

EuPRAXIA - A compact, cost-efficient particle and radiation source

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure