Seasonality Role on the Phenolics from Cultivated Baccharis dracunculifolia

Baccharis dracunculifolia is the source of Brazilian green propolis (BGP). Considering the broad spectrum of biological activities attributed to green proplis, B. dracunculifolia has a great potential for the development of new cosmetic and pharmaceutical products. In this work, the cultivation of 10 different populations of native B. dracunculifolia had been undertaken aiming to determine the role of seasonality on its phenolic compounds. For this purpose, fruits of this plant were collected from populations of 10 different regions, and 100 individuals of each population were cultivated in an experimental area of 1800 m2. With respect to cultivation, the yields of dry plant, essential oil and crude extract were measured monthly resulting in mean values of 399 ± 80 g, 0.6 ± 0.1% and 20 ± 4%, respectively. The HPLC analysis allowed detecting seven phenolic compounds: caffeic acid, ferulic acid, aromadendrin-4′-methyl ether (AME), isosakuranetin, artepillin C, baccharin and 2-dimethyl-6-carboxyethenyl-2H-1-benzopyran acid, which were the major ones throughout the 1-year monthly analysis. Caffeic acid was detected in all cultivated populations with mean of 4.0%. AME displayed the wide variation in relation to other compounds showing means values of 0.65 ± 0.13% at last quarter. Isosakuranetin and artepillin C showed increasing concentrations with values between 0% and 1.4% and 0% and 1.09%, respectively. The obtained results allow suggesting that the best time for harvesting this plant, in order to obtain good qualitative and quantitative results for these phenolic compounds, is between December and April

A study of some fundamental physicochemical variables on the morphology of mesoporous silica nanoparticles MCM-41 type

[EN] All variables affecting the morphology of mesoporous silica nanoparticles (MSN) should be carefully analyzed in order to truly tailored design their mesoporous structure according to their final use. Although complete control on MCM-41 synthesis has been already claimed, reproducibility and repeatability of results remain a big issue due to the lack of information reported in literature. Stirring rate, reaction volume, and system configuration (i.e., opened or closed reactor) are three variables that are usually omitted, making the comparison of product characteristics difficult. Specifically, the rate of solvent evaporation is seldom disclosed, and its influence has not been previously analyzed. These variables were systematically studied in this work, and they were proven to have a fundamental impact on final particle morphology. Hence, a high degree of circularity (C = 0.97) and monodispersed particle size distributions were only achieved when a stirring speed of 500 rpm and a reaction scale of 500 mL were used in a partially opened system, for a 2 h reaction at 80 degrees C. Well-shaped spherical mesoporous silica nanoparticles with a diameter of 95 nm, a pore size of 2.8 nm, and a total surface area of 954 m(2) g(-1) were obtained. Final characteristics made this product suitable to be used in biomedicine and nanopharmaceutics, especially for the design of drug delivery systems.This study was funded partially by Departamento Administrativo de Ciencia Tecnología e Innovación–COLCIENCIAS (recipient, Angela A. Beltrán-Osuna); Ministerio de Economía y Competitividad, MINECO, research number MAT2016-76039-C4-1-R (Recipient, José L. Gómez-Ribelles); and Universidad Nacional de Colombia, grant number DIB201010021438 (Recipient, Jairo E. Perilla).Beltrán-Osuna, A.; Gómez Ribelles, JL.; Perilla-Perilla, JE. (2017). A study of some fundamental physicochemical variables on the morphology of mesoporous silica nanoparticles MCM-41 type. Journal of Nanoparticle Research. 19(12):1-14. https://doi.org/10.1007/s11051-017-4077-2S1141912Barrabino A (2011) Synthesis of mesoporous silica particles with control of both pore diameter and particle size. Master Thesis, Chalmers University of Technology, SwedenBastos FS, Lima OA, Filho CR, Fernandes LD (2011) Mesoporous molecular sieve MCM-41 synthesis from fluoride media. Brazilian. J Chem Eng 28:649–658Beck JS, Vartuli JC, Roth WJ, Leonowicz ME, Kresge CT, Schmitt KD, Chu CTW, Olson DH, Sheppard EW, McCullen SB, Higgins JB, Schlenker JL (1992) A new family of mesoporous molecular sieves prepared with liquid crystal templates. J Am Chem Soc 114(27):10834–10843. https://doi.org/10.1021/ja00053a020Beltrán-Osuna AA, Perilla JE (2016) Colloidal and spherical mesoporous silica particles: synthesis and new technologies for delivery applications. J Sol-Gel Sci Technol 77(2):480–496. https://doi.org/10.1007/s10971-015-3874-2Bernardos A, Mondragón L, Aznar E et al (2010) Enzyme-responsive intracellular controlled release using nanometric silica mesoporous supports capped with “saccharides”. ACS Nano 4(11):6353–6368. https://doi.org/10.1021/nn101499dBharti C, Nagaich U, Pal AK, Gulati N (2015) Mesoporous silica nanoparticles in target drug delivery system: a review. Int J Pharm Investig 5(3):124–133. https://doi.org/10.4103/2230-973X.160844Brevet D, Hocine O, Delalande A, Raehm L, Charnay C, Midoux P, Durand JO, Pichon C (2014) Improved gene transfer with histidine-functionalized mesoporous silica nanoparticles. Int J Pharm 471(1-2):197–205. https://doi.org/10.1016/j.ijpharm.2014.05.020Cai Q, Luo Z, Pang W et al (2001) Dilute solution routes to various controllable morphologies of MCM-41 silica with a basic medium. Chem Mater 13(2):258–263. https://doi.org/10.1021/cm990661zChakraborty I, Mascharak PK (2016) Mesoporous silica materials and nanoparticles as carriers for controlled and site-specific delivery of gaseous signaling molecules. Microporous Mesoporous Mater 234:409–419. https://doi.org/10.1016/j.micromeso.2016.07.028Chen L, Zhang Z, Yao X, Chen X, Chen X (2015a) Intracellular pH-operated mechanized mesoporous silica nanoparticles as potential drug carries. Microporous Mesoporous Mater 201:169–175. https://doi.org/10.1016/j.micromeso.2014.09.023Chen X, Yao X, Wang C, Chen L, Chen X (2015b) Mesoporous silica nanoparticles capped with fluorescence-conjugated cyclodextrin for pH-activated controlled drug delivery and imaging. Microporous Mesoporous Mater 217:46–53. https://doi.org/10.1016/j.micromeso.2015.06.012Chen Y, Chen H, Shi J (2013) In vivo bio-safety evaluations and diagnostic / therapeutic applications of chemically designed mesoporous silica nanoparticles. Adv Mater 25(23):3144–3176. https://doi.org/10.1002/adma.201205292Chen Y, Shi X, Han B, Qin H, Li Z, Lu Y, Wang J, Kong Y (2012) The complete control for the nanosize of spherical MCM-41. J Nanosci Nanotechnol 12(9):7239–7249. https://doi.org/10.1166/jnn.2012.6459Cheng Y-J, Zeng X, Cheng D-B, Xu XD, Zhang XZ, Zhuo RX, He F (2016) Functional mesoporous silica nanoparticles (MSNs) for highly controllable drug release and synergistic therapy. Colloids Surfaces B Biointerfaces 145:217–225. https://doi.org/10.1016/j.colsurfb.2016.04.051Crommelin DJA, Florence AT (2013) Towards more effective advanced drug delivery systems. Int J Pharm 454(1):496–511. https://doi.org/10.1016/j.ijpharm.2013.02.020Edler KJ (1997) Synthesis and characterisation of the mesoporous molecular sieve, MCM-41. Doctoral dissertation, The Australian National University, AustraliaGuo Z, Liu X-M, Ma L, Li J, Zhang H, Gao YP, Yuan Y (2013) Effects of particle morphology, pore size and surface coating of mesoporous silica on naproxen dissolution rate enhancement. Colloids Surf B Biointerfaces 101:228–235. https://doi.org/10.1016/j.colsurfb.2012.06.026Han N, Wang Y, Bai J, Liu J, Wang Y, Gao Y, Jiang T, Kang W, Wang S (2016) Facile synthesis of the lipid bilayer coated mesoporous silica nanocomposites and their application in drug delivery. Microporous Mesoporous Mater 219:209–218. https://doi.org/10.1016/j.micromeso.2015.08.006Hu X, Wang Y, Peng B (2014) Chitosan-capped mesoporous silica nanoparticles as pH-responsive nanocarriers for controlled drug release. Chem - An Asian J 9(1):319–327. https://doi.org/10.1002/asia.201301105Huh S, Wiench JW, Yoo J et al (2003) Organic functionalization and morphology control of mesoporous silicas via a co-condensation synthesis method. Chem Mater 15(22):4247–4256. https://doi.org/10.1021/cm0210041Ikari K, Suzuki K, Imai H (2006) Structural control of mesoporous silica nanoparticles in a binary surfactant system. Langmuir 22(2):802–806. https://doi.org/10.1021/la0525527Iliade P, Miletto I, Coluccia S, Berlier G (2012) Functionalization of mesoporous MCM-41 with aminopropyl groups by co-condensation and grafting: a physico-chemical characterization. Res Chem Intermed 38(3-5):785–794. https://doi.org/10.1007/s11164-011-0417-5IUPAC (1985) Reporting physisorption data for gas/solid systems. Pure Appl Chem 57:603–619IUPAC (2014) Compendium of chemical terminology-gold book, 2.3.3. International Union of Pure and Applied ChemistryKhezri K, Roghani-Mamaqani H, Sarsabili M, Sobani M, Mirshafiei-Langari SA (2014) Spherical mesoporous silica nanoparticles/tailor-made polystyrene nanocomposites by in situ reverse atom transfer radical polymerization. Polym Sci Ser B 56(6):909–918. https://doi.org/10.1134/S1560090414660026Kresge CT, Leonowicz ME, Roth WJ, Vartuli JC, Beck JS (1992) Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism. Nature 359(6397):710–712. https://doi.org/10.1038/359710a0Lelong G, Bhattacharyya S, Kline S, Cacciaguerra T, Gonzalez MA, Saboungi ML (2008) Effect of surfactant concentration on the morphology and texture of MCM-41 materials. J Phys Chem C 112(29):10674–10680. https://doi.org/10.1021/jp800898nLv X, Zhang L, Xing F, Lin H (2016) Controlled synthesis of monodispersed mesoporous silica nanoparticles: particle size tuning and formation mechanism investigation. Microporous Mesoporous Mater 225:238–244. https://doi.org/10.1016/j.micromeso.2015.12.024Mamaeva V, Sahlgren C, Lindén M (2013) Mesoporous silica nanoparticles in medicine: recent advances. Adv Drug Deliv Rev 65(5):689–702. https://doi.org/10.1016/j.addr.2012.07.018Manzano M, Aina V, Areán CO, Balas F, Cauda V, Colilla M, Delgado MR, Vallet-Regí M (2008) Studies on MCM-41 mesoporous silica for drug delivery: effect of particle morphology and amine functionalization. Chem Eng J 137(1):30–37. https://doi.org/10.1016/j.cej.2007.07.078Merkus HG (2009) Particle size measurements: fundamentals, practice, quality. Springer Science +Businees Media B.V, The NetherlandsMorishige K, Fujii H, Uga M, Kinukawa D (1997) Capillary critical point of argon, nitrogen, oxygen, ethylene, and carbon dioxide in MCM-41. Langmuir 13(13):3494–3498. https://doi.org/10.1021/la970079ude Padua Oliveira DC, de Barros ALB, Belardi RM et al (2016) Mesoporous silica nanoparticles as a potential vaccine adjuvant against Schistosoma mansoni. J Drug Deliv Sci Technol 35:234–240. https://doi.org/10.1016/j.jddst.2016.07.002Phillips E, Penate-Medina O, Zanzonico PB, Carvajal RD, Mohan P, Ye Y, Humm J, Gonen M, Kalaigian H, Schoder H, Strauss HW, Larson SM, Wiesner U, Bradbury MS (2014) Clinical translation of an ultrasmall inorganic optical-PET imaging nanoparticle probe. Sci Transl Med 6(260):260ra149. https://doi.org/10.1126/scitranslmed.3009524Qu F, Zhu G, Lin H, Zhang W, Sun J, Li S, Qiu S (2006) A controlled release of ibuprofen by systematically tailoring the morphology of mesoporous silica materials. J Solid State Chem 179(7):2027–2035. https://doi.org/10.1016/j.jssc.2006.04.002Rafi AA, Mahkam M, Davaran S, Hamishehkar H (2016) A smart pH-responsive nano-carrier as a drug delivery system: a hybrid system comprised of mesoporous nanosilica MCM-41 (as a nano-container) & a pH-sensitive polymer (as smart reversible gatekeepers): preparation, characterization and in vitro releas. Eur J Pharm Sci 93:64–73. https://doi.org/10.1016/j.ejps.2016.08.005Rouquerol J, Rouquerol F, Llewellyn P, et al (2014) Adsorption by powders and porous solids: principles, methodology and applications. Elsevier Ltd.Selvam P, Bhatia SK, Sonwane CG (2001) Recent advances in processing and characterization of periodic mesoporous MCM-41 silicate molecular sieves. Ind Eng Chem Res 40(15):3237–3261. https://doi.org/10.1021/ie0010666Shi YT, Cheng HY, Geng Y, Nan HM, Chen W, Cai Q, Chen BH, Sun XD, Yao YW, Li HD (2010) The size-controllable synthesis of nanometer-sized mesoporous silica in extremely dilute surfactant solution. Mater Chem Phys 120(1):193–198. https://doi.org/10.1016/j.matchemphys.2009.10.045Shibata H, Chiba Y, Kineri T, Matsumoto M, Nishio K (2010) The effect of heat treatment on the interplanar spacing of the mesostructure during the synthesis of mesoporous MCM-41 silica. Colloids Surfaces A Physicochem Eng Asp 358(1-3):1–5. https://doi.org/10.1016/j.colsurfa.2009.12.020Slowing II, Vivero-Escoto JL, Wu C-W, Lin VSY (2008) Mesoporous silica nanoparticles as controlled release drug delivery and gene transfection carriers. Adv Drug Deliv Rev 60(11):1278–1288. https://doi.org/10.1016/j.addr.2008.03.012Sun R, Wang W, Wen Y, Zhang X (2015) Recent advance on mesoporous silica nanoparticles-based controlled release system: intelligent switches open up. Nano 5(4):2019–2053. https://doi.org/10.3390/nano5042019U.S. Department of Health & Human Services (2015) Cancer Nanotechnology PlanUkmar T, Maver U, Planinšek O, Kaučič V, Gaberšček M, Godec A (2011) Understanding controlled drug release from mesoporous silicates: theory and experiment. J Control Release 155(3):409–417. https://doi.org/10.1016/j.jconrel.2011.06.038Vallet-Regi M, Arcos Navarrete D (2016) Nanoceramics in clinical use, 1st edn. The Royal Society of Chemistry, CambridgeVallet-Regi M, Rámila A, Del Real RP, Pérez-Pariente J (2001) A new property of MCM-41: drug delivery system. Chem Mater 13(2):308–311. https://doi.org/10.1021/cm0011559Varga N, Benko M, Sebok D et al (2015) Mesoporous silica core-shell composite functionalized with polyelectrolytes for drug delivery. Microporous Mesoporous Mater 213:134–141. https://doi.org/10.1016/j.micromeso.2015.02.008Wang Y, Zhao Q, Han N, Bai L, Li J, Liu J, Che E, Hu L, Zhang Q, Jiang T, Wang S (2015) Mesoporous silica nanoparticles in drug delivery and biomedical applications. Nanomed Nanotechnol Biol Med 11(2):313–327. https://doi.org/10.1016/j.nano.2014.09.014Wanyika H, Gatebe E, Kioni P et al (2011) Synthesis and characterization of ordered mesoporous silica nanoparticles with tunable physical properties by varying molar composition of reagents. African J Pharm Pharmacol 5(21):2402–2410. https://doi.org/10.5897/AJPP11.592Wu SH, Mou CY, Lin HP (2013) Synthesis of mesoporous silica nanoparticles. Chem Soc Rev 42(9):3862–3875. https://doi.org/10.1039/c3cs35405aXu X, Lü S, Gao C, Wang X, Bai X, Gao N, Liu M (2015a) Facile preparation of pH-sensitive and self-fluorescent mesoporous silica nanoparticles modified with PAMAM dendrimers for label-free imaging and drug delivery. Chem Eng J 266:171–178. https://doi.org/10.1016/j.cej.2014.12.075Xu X, Lü S, Gao C, Wang X, Bai X, Duan H, Gao N, Feng C, Liu M (2015b) Polymeric micelle-coated mesop orous silica nanoparticle for enhanced fluorescent imaging and pH-responsive drug delivery. Chem Eng J 279:851–860. https://doi.org/10.1016/j.cej.2015.05.085Xu X, Lü S, Gao C, Feng C, Wu C, Bai X, Gao N, Wang Z, Liu M (2016) Self-fluorescent and stimuli-responsive mesoporous silica nanoparticles using a double-role curcumin gatekeeper for drug delivery. Chem Eng J 300:185–192. https://doi.org/10.1016/j.cej.2016.04.087Yang Y, Yu C (2015) Advances in silica based nanoparticles for targeted cancer therapy. Nanomedicine nanotechnology. Biol Med 12(2):317–332. https://doi.org/10.1016/j.nano.2015.10.018Zhang H, Tong C, Sha J, Liu B, Lü C (2015) Fluorescent mesoporous silica nanoparticles functionalized graphene oxide: a facile FRET-based ratiometric probe for Hg2+. Sensors Actuators B Chem 206:181–189. https://doi.org/10.1016/j.snb.2014.09.051Zhou C, Yan C, Zhao J, Wang H, Zhou Q, Luo W (2016) Rapid synthesis of morphology-controlled mesoporous silica nanoparticles from silica fume. J Taiwan Inst Chem Eng 62:307–312. https://doi.org/10.1016/j.jtice.2016.01.03

Photography-based taxonomy is inadequate, unnecessary, and potentially harmful for biological sciences

The question whether taxonomic descriptions naming new animal species without type specimen(s) deposited in collections should be accepted for publication by scientific journals and allowed by the Code has already been discussed in Zootaxa (Dubois & Nemésio 2007; Donegan 2008, 2009; Nemésio 2009a–b; Dubois 2009; Gentile & Snell 2009; Minelli 2009; Cianferoni & Bartolozzi 2016; Amorim et al. 2016). This question was again raised in a letter supported by 35 signatories published in the journal Nature (Pape et al. 2016) on 15 September 2016. On 25 September 2016, the following rebuttal (strictly limited to 300 words as per the editorial rules of Nature) was submitted to Nature, which on 18 October 2016 refused to publish it. As we think this problem is a very important one for zoological taxonomy, this text is published here exactly as submitted to Nature, followed by the list of the 493 taxonomists and collection-based researchers who signed it in the short time span from 20 September to 6 October 2016

<i>In vitro</i> antiviral activity of the anti-HCV drugs daclatasvir and sofosbuvir against SARS-CoV-2, the aetiological agent of COVID-19

BackgroundCurrent approaches of drug repurposing against COVID-19 have not proven overwhelmingly successful and the SARS-CoV-2 pandemic continues to cause major global mortality. SARS-CoV-2 nsp12, its RNA polymerase, shares homology in the nucleotide uptake channel with the HCV orthologue enzyme NS5B. Besides, HCV enzyme NS5A has pleiotropic activities, such as RNA binding, that are shared with various SARS-CoV-2 proteins. Thus, anti-HCV NS5B and NS5A inhibitors, like sofosbuvir and daclatasvir, respectively, could be endowed with anti-SARS-CoV-2 activity.MethodsSARS-CoV-2-infected Vero cells, HuH-7 cells, Calu-3 cells, neural stem cells and monocytes were used to investigate the effects of daclatasvir and sofosbuvir. In silico and cell-free based assays were performed with SARS-CoV-2 RNA and nsp12 to better comprehend the mechanism of inhibition of the investigated compounds. A physiologically based pharmacokinetic model was generated to estimate daclatasvir's dose and schedule to maximize the probability of success for COVID-19.ResultsDaclatasvir inhibited SARS-CoV-2 replication in Vero, HuH-7 and Calu-3 cells, with potencies of 0.8, 0.6 and 1.1 μM, respectively. Although less potent than daclatasvir, sofosbuvir alone and combined with daclatasvir inhibited replication in Calu-3 cells. Sofosbuvir and daclatasvir prevented virus-induced neuronal apoptosis and release of cytokine storm-related inflammatory mediators, respectively. Sofosbuvir inhibited RNA synthesis by chain termination and daclatasvir targeted the folding of secondary RNA structures in the SARS-CoV-2 genome. Concentrations required for partial daclatasvir in vitro activity are achieved in plasma at Cmax after administration of the approved dose to humans.ConclusionsDaclatasvir, alone or in combination with sofosbuvir, at higher doses than used against HCV, may be further fostered as an anti-COVID-19 therapy

A validated capillary gas chromatography method for guaco (Mikania glomerata S.) quality control and rastreability: from plant biomass to phytomedicines

This work describes a full validation of a capillary gas chromatography analytical methodology using internal standardization for the quantification of coumarin (1,2-benzopyrone) in guaco (Mikania glomerata Spreng - Asteraceae) products: syrup, plant and its extract, including the stability study of the phytomedicine. For the analysis, it was used an HP-5 capillary column (30 m x 0.32 mm x 0.25 µm), hydrogen at a flow rate of 1.8 mL/min and the increasing temperature gradient was: 100 ºC to 250 ºC, 15 ºC/min. The temperature of injector (split 1:20) and detector were kept at 250 ºC and 270 ºC, respectively. The retention times of the standards for the above conditions were 2.86 minutes for 1, 2, 3, 4-tetramethylbenzene, 4.45 min for piperonal (internal standards), and 5.36 minutes for coumarin. After extraction procedure, the recovery of coumarin determined for plant raw material was 101.6 %, while for syrup it was 100.8 %. Detection and quantification limits were 0.5 µg/mL and 1.5 µg/mL, respectively. Precision was determined for all samples and the results were lower than 2.5 %. The total amount of coumarin in plant raw material, its extract and syrup were 0.38% w/w, 1.33 mg/mL and 0.143 mg/mL, respectively

Dynamic maceration of Copaifera langsdorffii leaves: a technological study using fractional factorial design

The Copaifera langsdorffii Desf., Fabaceae, is a Brazilian native tree, known as copaiba, which oil is commonly used in folk medicine as muscle relaxant, wound healing, antiseptic and anti-inflammatory to respiratory and urinary tracts. Despite of the wide use of the oil of Copaifera species, scientific works related to the study of its leaves are rarely found. In fact, processes for flavonoid extraction from C. langsdorffii leaves have not been studied yet leaving a wide field to be investigated. In this work, the 2(5-2) fractional factorial design was selected in order to study how the factors of a dynamic maceration process influence the responses of total flavonoids, total phenols, quercetrin and afzelin contents, and antioxidant activity in extracts from C. langsdorffii leaves. The results demonstrated that the significant factors studied were the drug load in extractor, the ethanol/water ratio and the stirring speed whereas the temperature and the extraction time were not significant. In conclusion, this study allowed visualizing which factors were considered the most important in copaiba leaves dynamic maceration and their effect in extract antioxidant activity. Furthermore, this technological study gives directions to optimize future extraction experiments from C. langsdorffii