Highly efficient planar perovskite solar cells through band alignment engineering

The simplification of perovskite solar cells (PSCs), by replacing the mesoporous electron selective layer (ESL) with a planar one, is advantageous for large-scale manufacturing. PSCs with a planar TiO2 ESL have been demonstrated, but these exhibit unstabilized power conversion efficiencies (PCEs). Herein we show that planar PSCs using TiO2 are inherently limited due to conduction band misalignment and demonstrate, with a variety of characterization techniques, for the first time that SnO2 achieves a barrier-free energetic configuration, obtaining almost hysteresis-free PCEs of over 18% with record high voltages of up to 1.19 V

The Role of Dimensionality on the Optoelectronic Properties of Oxide and Halide Perovskites, and their Halide Derivatives

Funder: Kim and Juliana Silverman Research FellowshipFunder: Graduate Assistance in Areas of National NeedAbstract: Halide perovskite semiconductors have risen to prominence in photovoltaics and light‐emitting diodes (LEDs), but traditional oxide perovskites, which overcome the stability limitations of their halide counterparts, have also recently witnessed a rise in potential as solar absorbers. One of the many important factors underpinning these developments is an understanding of the role of dimensionality on the optoelectronic properties and, consequently, on the performance of the materials in photovoltaics and LEDs. This review article examines the role of structural and electronic dimensionality, as well as form factor, in oxide and halide perovskites, and in lead‐free alternatives to halide perovskites. Insights into how dimensionality influences the band gap, stability, charge‐carrier transport, recombination processes and defect tolerance of the materials, and the impact these parameters have on device performance are brought forward. Particular emphasis is placed on carrier/exciton‐phonon coupling, which plays a significant role in the materials considered, owing to their soft lattices and composition of heavy elements, and becomes more prominent as dimensionality is reduced. It is finished with a discussion of the implications on the classes of materials future efforts should focus on, as well as the key questions that need to be addressed

Pooling/bootstrap-based GWAS (pbGWAS) identifies new loci modifying the age of onset in PSEN1 p.Glu280Ala Alzheimer\u27s disease

The literature on GWAS (genome-wide association studies) data suggests that very large sample sizes (for example, 50,000 cases and 50,000 controls) may be required to detect significant associations of genomic regions for complex disorders such as Alzheimer\u27s disease (AD). Because of the challenges of obtaining such large cohorts, we describe here a novel sequential strategy that combines pooling of DNA and bootstrapping (pbGWAS) in order to significantly increase the statistical power and exponentially reduce expenses. We applied this method to a very homogeneous sample of patients belonging to a unique and clinically well-characterized multigenerational pedigree with one of the most severe forms of early onset AD, carrying the PSEN1 p.Glu280Ala mutation (often referred to as E280A mutation), which originated as a consequence of a founder effect. In this cohort, we identified novel loci genome-wide significantly associated as modifiers of the age of onset of AD (CD44, rs187116, P=1.29 _ 10?12; NPHP1, rs10173717, P=1.74 _ 10?12; CADPS2, rs3757536, P=1.54 _ 10?10; GREM2, rs12129547, P=1.69 _ 10?13, among others) as well as other loci known to be associated with AD. Regions identified by pbGWAS were confirmed by subsequent individual genotyping. The pbGWAS methodology and the genes it targeted could provide important insights in determining the genetic causes of AD and other complex conditions

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

The performance of perovskite solar cells is predominantly limited by non-radiative recombination, either through trap-assisted recombination in the absorber layer or via minority carrier recombination at the perovskite/transport layer interfaces. Here, we use transient and absolute photoluminescence imaging to visualize all non-radiative recombination pathways in planar pin-type perovskite solar cells with undoped organic charge transport layers. We find significant quasi-Fermi-level splitting losses (135 meV) in the perovskite bulk, whereas interfacial recombination results in an additional free energy loss of 80 meV at each individual interface, which limits the open-circuit voltage (V) of the complete cell to ~1.12 V. Inserting ultrathin interlayers between the perovskite and transport layers leads to a substantial reduction of these interfacial losses at both the p and n contacts. Using this knowledge and approach, we demonstrate reproducible dopant-free 1 cm perovskite solar cells surpassing 20% efficiency (19.83% certified) with stabilized power output, a high V (1.17 V) and record fill factor (>81%)

A922 Sequential measurement of 1 hour creatinine clearance (1-CRCL) in critically ill patients at risk of acute kidney injury (AKI)

Meeting abstrac

An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles

AbstractLarge datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences.</jats:p

Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance

Saliba M, Correa-Baena J-P, Grätzel M, Hagfeldt A, Abate A. Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance. Angewandte Chemie International Edition. 2018;57(10):2554-2569.Organic–inorganic perovskites have made tremendous progress in recent years due to exceptional material properties such as high panchromatic absorption, charge carrier diffusion lengths, and a sharp optical band edge. The combination of high-quality semiconductor performance with low-cost deposition techniques seems to be a match made in heaven, creating great excitement far beyond academic ivory towers. This is particularly true for perovskite solar cells (PSCs) that have shown unprecedented gains in efficiency and stability over a time span of just five years. Now there are serious efforts for commercialization with the hope that PSCs can make a major impact in generating inexpensive, sustainable solar electricity. In this Review, we will focus on perovskite material properties as well as on devices from the atomic to the thin film level to highlight the remaining challenges and to anticipate the future developments of PSCs

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Perovskite solar cells (PSCs) have now achieved efficiencies in excess of 22%, but very little is known about their long-term stability under thermal stress. So far, stability reports have hinted at the importance of substituting the organic components, but little attention has been given to the metal contact. We investigated the stability of state-of-the-art PSCs with efficiencies exceeding 20%. Remarkably, we found that exposing PSCs to a temperature of 70 degrees C is enough to induce gold migration through the hole-transporting layer (HTL), Spiro-MeOTAD, and into the perovskite material, which in turn severely affects the device performance metrics under working conditions. Importantly, we found that the main cause of irreversible degradation is not due to decomposition of the organic and hybrid perovskite layers. By introducing a Cr metal interlayer between the HTL and gold electrode, high-temperature-induced irreversible long-term losses are avoided. This key finding is essential in the quest for achieving high efficiency, long-term stable PSCs which, in order to be commercially viable, need to withstand hard thermal stress tests