Chemical transport model ozone simulations for spring 2001 over the western Pacific:comparisons with TRACE-P lidar, ozonesondes, and Total Ozone Mapping Spectrometer columns

Two closely related chemical transport models (CTMs) employing the same high-resolution meteorological data (similar to180 km x similar to180 km x similar to600 m) from the European Centre for Medium-Range Weather Forecasts are used to simulate the ozone total column and tropospheric distribution over the western Pacific region that was explored by the NASA Transport and Chemical Evolution over the Pacific (TRACE-P) measurement campaign in February-April 2001. We make extensive comparisons with ozone measurements from the lidar instrument on the NASA DC-8, with ozonesondes taken during the period around the Pacific Rim, and with TOMS total column ozone. These demonstrate that within the uncertainties of the meteorological data and the constraints of model resolution, the two CTMs (FRSGC/UCI and Oslo CTM2) can simulate the observed tropospheric ozone and do particularly well when realistic stratospheric ozone photochemistry is included. The greatest differences between the models and observations occur in the polluted boundary layer, where problems related to the simplified chemical mechanism and inadequate horizontal resolution are likely to have caused the net overestimation of about 10 ppb mole fraction. In the upper troposphere, the large variability driven by stratospheric intrusions makes agreement very sensitive to the timing of meteorological features

Aircraft pollution: a futuristic view

International audienceImpacts of NOx, H2O and aerosol emissions from a projected 2050 aircraft fleet, provided in the EU project SCENIC, are investigated using the Oslo CTM2, a 3-D chemical transport model including comprehensive chemistry for the stratosphere and the troposphere. The aircraft emission scenarios comprise emissions from subsonic and supersonic aircraft. The increases in NOy due to emissions from the mixed fleet are comparable for subsonic (at 11–12 km) and supersonic (at 18–20 km) aircraft, with annual zonal means of 1.35 ppbv and 0.83 ppbv, respectively. H2O increases are also comparable at these altitudes: 630 and 599 ppbv, respectively. The aircraft emissions increase tropospheric ozone by about 10 ppbv in the Northern Hemisphere due to increased ozone production, mainly because of subsonic aircraft. Supersonic aircraft contribute to a reduction of stratospheric ozone due to increased ozone loss at higher altitudes. In the Northern Hemisphere the reduction is about 39 ppbv, but also in the Southern Hemisphere a 22 ppbv stratospheric decrease is modeled due to transport of supersonic aircraft emissions and ozone depleted air. The total ozone column is increased in lower and Northern mid-latitudes, otherwise the increase of ozone loss contributes to a decrease of the total ozone column. Two exceptions are the Northern Hemispheric spring, where the ozone loss increase is small due to transport processes, and tropical latitudes during summer where the effect of subsonic aircraft is low due to a high tropopause. Aerosol particles emitted by aircraft reduce both aircraft and background NOx, more than counterweighting the effect of NOx and H2O aircraft emissions in the stratosphere. Above about 20 km altitude, the NOx (and thus ozone loss) reduction is large enough to give an increase in ozone due to aircraft emissions. This effect is comparable in the Northern and Southern Hemisphere. At 11–20 km altitude, however, ozone production is reduced due to less NOx. Also ClONO2 is increased at this altitude due to enhanced heterogeneous reactions (lowered HCl), and ClO is increased due to less NOx, further enhancing ozone loss in this region. This results in a 14 ppbv further reduction of ozone. Mainly, this results in an increase of the total ozone column due to a decrease in ozone loss caused by the NOx cycle (at the highest altitudes). At the lowermost latitudes, the reduced loss due to the NOx cycle is small. However, ozone production at lower altitudes is reduced and the loss due to ClO is increased, giving a decrease in the total ozone column. Also, at high latitudes during spring the heterogeneous chemistry is more efficient on PSCs, increasing the ozone loss

Practitioners’ perspectives on quality of life in aphasia rehabilitation in Denmark

Objective: This study reports on Danish speech and language therapists’ knowledge and understanding of quality of life (QOL) in aphasia, including therapists’ views on education and training in relation to preparedness for working on QOL, use of measures, and barriers to applying QOL in practice. Methods: 14 Danish clinicians completed a 48-item online questionnaire regarding their views, perspectives and practices that included multiple-choice questions, rating scales, and boxes permitting free text responses. Descriptive statistics were used to characterize the numerical data, and content analysis was applied to text responses. Results: The clinicians interpreted QOL as subjective wellbeing and participation, and explored it with most clients and relatives using informal methods, primarily conversation, for the purposes of identifying relevant goals to direct treatment. Clinicians perceived a need for greater theoretical, practical and experiential knowledge regarding QOL. They also identified a need for translated QOL instruments and training in these measures in practice. Conclusion: Despite a reported lack of knowledge about and tools for measuring QOL, Danish clinicians are applying QOL issues in their practice and perceive these issues as valuable and important in assessment and therapy. The findings have clear implications for tool development, and workforce education

Multi-model simulations of the impact of international shipping on Atmospheric Chemistry and Climate in 2000 and 2030

The global impact of shipping on atmospheric chemistry and radiative forcing, as well as the associated uncertainties, have been quantified using an ensemble of ten state-of-the-art atmospheric chemistry models and a predefined set of emission data. The analysis is performed for present-day conditions ( year 2000) and for two future ship emission scenarios. In one scenario ship emissions stabilize at 2000 levels; in the other ship emissions increase with a constant annual growth rate of 2.2% up to 2030 ( termed the "Constant Growth Scenario" (CGS)). Most other anthropogenic emissions follow the IPCC ( Intergovernmental Panel on Climate Change) SRES ( Special Report on Emission Scenarios) A2 scenario, while biomass burning and natural emissions remain at year 2000 levels. An intercomparison of the model results with observations over the Northern Hemisphere (25 degrees - 60 degrees N) oceanic regions in the lower troposphere showed that the models are capable to reproduce ozone (O-3) and nitrogen oxides (NOx= NO+ NO2) reasonably well, whereas sulphur dioxide (SO2) in the marine boundary layer is significantly underestimated. The most pronounced changes in annual mean tropospheric NO2 and sulphate columns are simulated over the Baltic and North Seas. Other significant changes occur over the North Atlantic, the Gulf of Mexico and along the main shipping lane from Europe to Asia, across the Red and Arabian Seas. Maximum contributions from shipping to annual mean near-surface O-3 are found over the North Atlantic ( 5 - 6 ppbv in 2000; up to 8 ppbv in 2030). Ship contributions to tropospheric O3 columns over the North Atlantic and Indian Oceans reach 1 DU in 2000 and up to 1.8 DU in 2030. Tropospheric O-3 forcings due to shipping are 9.8 +/- 2.0 mW/m(2) in 2000 and 13.6 +/- 2.3 mW/m(2) in 2030. Whilst increasing O-3, ship NOx simultaneously enhances hydroxyl radicals over the remote ocean, reducing the global methane lifetime by 0.13 yr in 2000, and by up to 0.17 yr in 2030, introducing a negative radiative forcing. The models show future increases in NOx and O-3 burden which scale almost linearly with increases in NOx emission totals. Increasing emissions from shipping would significantly counteract the benefits derived from reducing SO2 emissions from all other anthropogenic sources under the A2 scenario over the continents, for example in Europe. Globally, shipping contributes 3% to increases in O-3 burden between 2000 and 2030, and 4.5% to increases in sulphate under A2/CGS. However, if future ground based emissions follow a more stringent scenario, the relative importance of ship emissions will increase. Inter-model differences in the simulated O-3 contributions from ships are significantly smaller than estimated uncertainties stemming from the ship emission inventory, mainly the ship emission totals, the distribution of the emissions over the globe, and the neglect of ship plume dispersion

TRADEOFFs in climate effects through aircraft routing: forcing due to radiatively active gases

We have estimated impacts of alternative aviation routings on the radiative forcing. Changes in ozone and OH have been estimated in four Chemistry Transport Models (CTMs) participating in the TRADEOFF project. Radiative forcings due to ozone and methane have been calculated accordingly. In addition radiative forcing due to CO2 is estimated based on fuel consumption. Three alternative routing cases are investigated; one scenario assuming additional polar routes and two scenarios assuming aircraft cruising at higher (+2000 ft) and lower (−6000 ft) altitudes. Results from the base case in year 2000 are included as a reference. Taking first a steady state backward looking approach, adding the changes in the forcing from ozone, CO2 and CH4, the ranges of the models used in this work are −0.8 to −1.8 and 0.3 to 0.6 m Wm−2 in the lower (−6000 ft) and higher (+2000 ft) cruise levels, respectively. In relative terms, flying 6000ft lower reduces the forcing by 5–10% compared to the current flight pattern, whereas flying higher, while saving fuel and presumably flying time, increases the forcing by about 2–3%. Taking next a forward looking approach we have estimated the integrated forcing (m Wm−2 yr) over 20 and 100 years time horizons. The relative contributions from each of the three climate gases are somewhat different from the backward looking approach. The differences are moderate adopting 100 year time horizon, whereas under the 20 year horizon CO2 naturally becomes less important relatively. Thus the forcing agents impact climate differently on various time scales. Also, we have found significant differences between the models for ozone and methane. We conclude that we are not yet at a point where we can include non-CO2 effects of aviation in emission trading schemes. Nevertheless, the rerouting cases that have been studied here yield relatively small changes in the radiative forcing due to the radiatively active gases

An AeroCom initial assessment – optical properties in aerosol component modules of global models

The AeroCom exercise diagnoses multi-component aerosol modules in global modeling. In an initial assessment simulated global distributions for mass and mid-visible aerosol optical thickness (aot) were compared among 20 different modules. Model diversity was also explored in the context of previous comparisons. For the component combined aot general agreement has improved for the annual global mean. At 0.11 to 0.14, simulated aot values are at the lower end of global averages suggested by remote sensing from ground (AERONET ca. 0.135) and space (satellite composite ca. 0.15). More detailed comparisons, however, reveal that larger differences in regional distribution and significant differences in compositional mixture remain. Of particular concern are large model diversities for contributions by dust and carbonaceous aerosol, because they lead to significant uncertainty in aerosol absorption (aab). Since aot and aab, both, influence the aerosol impact on the radiative energy-balance, the aerosol (direct) forcing uncertainty in modeling is larger than differences in aot might suggest. New diagnostic approaches are proposed to trace model differences in terms of aerosol processing and transport: These include the prescription of common input (e.g. amount, size and injection of aerosol component emissions) and the use of observational capabilities from ground (e.g. measurements networks) or space (e.g. correlations between aerosol and clouds)

Radiative forcing in the 21st century due to ozone changes in the troposphere and the lower stratosphere

Radiative forcing due to changes in ozone is expected for the 21st century. An assessment on changes in the tropospheric oxidative state through a model intercomparison ("OxComp'') was conducted for the IPCC Third Assessment Report (IPCC-TAR). OxComp estimated tropospheric changes in ozone and other oxidants during the 21st century based on the "SRES'' A2p emission scenario. In this study we analyze the results of 11 chemical transport models (CTMs) that participated in OxComp and use them as input for detailed radiative forcing calculations. We also address future ozone recovery in the lower stratosphere and its impact on radiative forcing by applying two models that calculate both tropospheric and stratospheric changes. The results of OxComp suggest an increase in global-mean tropospheric ozone between 11.4 and 20.5 DU for the 21st century, representing the model uncertainty range for the A2p scenario. As the A2p scenario constitutes the worst case proposed in IPCC-TAR we consider these results as an upper estimate. The radiative transfer model yields a positive radiative forcing ranging from 0.40 to 0.78 W m(-2) on a global and annual average. The lower stratosphere contributes an additional 7.5-9.3 DU to the calculated increase in the ozone column, increasing radiative forcing by 0.15-0.17 W m(-2). The modeled radiative forcing depends on the height distribution and geographical pattern of predicted ozone changes and shows a distinct seasonal variation. Despite the large variations between the 11 participating models, the calculated range for normalized radiative forcing is within 25%, indicating the ability to scale radiative forcing to global-mean ozone column change

Analysis and quantification of the diversities of aerosol life cycles within AeroCom

Simulation results of global aerosol models have been assembled in the framework of the AeroCom intercomparison exercise. In this paper, we analyze the life cycles of dust, sea salt, sulfate, black carbon and particulate organic matter as simulated by sixteen global aerosol models. The diversities among the models for the sources and sinks, burdens, particle sizes, water uptakes, and spatial dispersals have been established. These diversities have large consequences for the calculated radiative forcing and the aerosol concentrations at the surface. The AeroCom all-models-average emissions are dominated by the mass of sea salt (SS), followed by dust (DU), sulfate (SO_4), particulate organic matter (POM), and finally black carbon (BC). Interactive parameterizations of the emissions and contrasting particles sizes of SS and DU lead generally to higher diversities of these species, and for total aerosol. The lower diversity of the emissions of the fine aerosols, BC, POM, and SO_4, is due to the use of similar emission inventories, and does therefore not necessarily indicate a better understanding of their sources. The diversity of SO_4-sources is mainly caused by the disagreement on depositional loss of precursor gases and on chemical production. The diversities of the emissions are passed on to the burdens, but the latter are also strongly affected by the model-specific treatments of transport and aerosol processes. The burdens of dry masses decrease from largest to smallest: DU, SS, SO_4, POM, and BC. The all-models-average residence time is shortest for SS with about half a day, followed by S_O4 and DU with four days, and POM and BC with six and seven days, respectively. The wet deposition rate is controlled by the solubility and increases from DU, BC, POM to SO_4 and SS. It is the dominant sink for SO_4, BC, and POM, and contributes about one third to the total removal rate coefficients of SS and DU species. For SS and DU we find high diversities for the removal rate coefficients and deposition pathways. Models do neither agree on the split between wet and dry deposition, nor on that between sedimentation and turbulent dry Deposition. We diagnose an extremely high diversity for the uptake of ambient water vapor that influences the particle size and thus the sink rate coefficients. Furthermore, we find little agreement among the model results for the partitioning of wet removal into scavenging by convective and stratiform rain. Large differences exist for aerosol dispersal both in the vertical and in the horizontal direction. In some models, a minimum of total aerosol concentration is simulated at the surface. Aerosol dispersal is most pronounced for SO4 and BC and lowest for SS. Diversities are higher for meridional than for vertical dispersal, they are similar for a given species and highest for SS and DU. For these two components we do not find a correlation between vertical and meridional aerosol dispersal. In addition the degree of dispersals of SS and DU is not related to their residence times. SO_4, BC, and POM, however, show increased meridional dispersal in models with larger vertical dispersal, and dispersal is larger for longer simulated residence times

Photochemical modelling in the Po basin with focus on formaldehyde and ozone

As part of the EU project FORMAT ( Formaldehyde as a Tracer of Oxidation in the Troposphere), a field campaign was carried out in the vicinity of Milan during the summer of 2002. Results from a 3-D regional chemical transport model (NILU RCTM) were used to interpret the observations focusing primarily on HCHO and ozone. The performance of the model was assessed by comparing model results with ground based and aircraft measurements. The model results show good agreement with surface measurements, and the model is able to reproduce the photochemical episodes during fair weather days. The comparison indicates that the model can represent well the HCHO concentrations as well as their temporal and spatial variability. The relationship between HCHO and (O-3 x H2O) was used to validate the model ability to predict the HCHO concentrations. Further analysis revealed the importance of the representativeness of different instruments: in-situ concentrations might be locally enhanced by emissions, while long path measurements over a forest can be influenced by rapid formation of HCHO from isoprene. The model is able to capture the plume from the city of Milan and the modelled levels agree generally well with the aircraft measurements, although the wind fields used in the model can lead to a displacement of the ozone plume. During the campaign period, O3 levels were seldom higher than 80 ppb, the peak surface ozone maxima reached 90 ppb. Those relatively low values can be explained by low emissions during the August vacation and unstable weather conditions in this period. The modelled Delta O-3/Delta NOz slope at Alzate of 5.1 agrees well with the measured slope of 4.9

The effect of harmonized emissions on aerosol properties in global models – an AeroCom experiment

The effects of unified aerosol sources on global aerosol fields simulated by different models are examined in this paper. We compare results from two AeroCom experiments, one with different (ExpA) and one with unified emissions, injection heights, and particle sizes at the source (ExpB). Surprisingly, harmonization of aerosol sources has only a small impact on the simulated diversity for aerosol burden, and consequently optical properties, as the results are largely controlled by model-specific transport, removal, chemistry (leading to the formation of secondary aerosols) and parameterizations of aerosol microphysics (e.g. the split between deposition pathways) and to a lesser extent on the spatial and temporal distributions of the (precursor) emissions. The burdens of black carbon and especially sea salt become more coherent in ExpB only, because the large ExpA diversity for these two species was caused by few outliers. The experiment also indicated that despite prescribing emission fluxes and size distributions, ambiguities in the implementation in individual models can lead to substantial differences. These results indicate the need for a better understanding of aerosol life cycles at process level (including spatial dispersal and interaction with meteorological parameters) in order to obtain more reliable results from global aerosol simulations. This is particularly important as such model results are used to assess the consequences of specific air pollution abatement strategies