A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

The discretisation of rotordynamic systems usually results in a high number of coordinates, so the computation of the solution of the equations of motion is very time consuming. An efficient semianalytic time-integration method combined with a substructure technique is given, which accounts for nonsymmetric matrices and local nonlinearities. The partitioning of the equation of motion into two substructures is performed. Symmetric and linear background systems are defined for each substructure. The excitation of the substructure comes from the given excitation force, the nonlinear restoring force, the induced force due to the gyroscopic and circulatory effects of the substructure under consideration and the coupling force of the substructures. The high effort for the analysis with complex numbers, which is necessary for nonsymmetric systems, is omitted. The solution is computed by means of an integral formulation. A suitable approximation for the unknown coordinates, which are involved in the coupling forces, has to be introduced and the integration results in Green's functions of the considered substructures. Modal analysis is performed for each linear and symmetric background system of the substructure. Modal reduction can be easily incorporated and the solution is calculated iteratively. The numerical behaviour of the algorithm is discussed and compared to other approximate methods of nonlinear structural dynamics for a benchmark problem and a representative example

LEAN PANEL BENDER – Einige mechanische Aspekte der Modellierung in Echtzeit für Produktion in Losgröße 1

Nachfolgend werden einige wissenschaftliche Aspekte der Echtzeit-Materialerkennungsstrategie MAC diskutiert, die in der neuen Maschinenfamilie LEAN PANEL BENDER der Firma Salvagnini Maschinenbau realisiert ist und die eine hochpräzise und hocheffiziente Herstellung von komplex geformten Blechprodukten sowohl bei Losgröße 1 als auch in der Serie erlaubt.(VLID)342339

Industrial application of advanced adaptive concepts for automatic panel benders

Recently, the requirements on sheet metal production processes have increased significantly. Highest precision and flexibility with efficient energy consumption and short cycle times can be achieved by advanced concepts only. This requires a deep insight into the non-linear bending process. For this sake, efficient simulation models have been implemented to model the bending process: two and three dimensional finite element models combined with multibody simulation tools, contact mechanics algorithms and substructure techniques. The simulation tools have been successfully calibrated by measurement results. With the obtained detailed process knowledge, new adaptive concepts have been introduced, e.g. a smart crowning system in order to achieve straight profiles. The industrial application has shown the advantage of utilizing the above mentioned techniques. The straightness of the bends has been significantly increased, while energy consumption and cycle times have been reduced. Secondly, the development time of new machine concepts has been drastically reduced, such that the first prototype can be transferred to series production within short time. Moreover, the applied strategies show a large potential for future developments

Advanced mechanical simulation models for automatic panel benders

With automatic panel benders complete products are manufactured from sheet metal. In order to achieve short cycle times with high flexibility, a deep insight into the non-linear bending process is required. For this reason, efficient mechanical simulation models have been implemented, combining Finite Element Method, multibody dynamics simulation tools, contact mechanics algorithms and substructuring. Scope of this work is the comparison of several simulation models with measurement results performed on a Salvagnini P4XeD automatic panel bender

Coulomb dissociation of N 20,21

Neutron-rich light nuclei and their reactions play an important role in the creation of chemical elements. Here, data from a Coulomb dissociation experiment on N20,21 are reported. Relativistic N20,21 ions impinged on a lead target and the Coulomb dissociation cross section was determined in a kinematically complete experiment. Using the detailed balance theorem, the N19(n,γ)N20 and N20(n,γ)N21 excitation functions and thermonuclear reaction rates have been determined. The N19(n,γ)N20 rate is up to a factor of 5 higher at

Identification of genetic variants associated with Huntington's disease progression: a genome-wide association study

Background Huntington's disease is caused by a CAG repeat expansion in the huntingtin gene, HTT. Age at onset has been used as a quantitative phenotype in genetic analysis looking for Huntington's disease modifiers, but is hard to define and not always available. Therefore, we aimed to generate a novel measure of disease progression and to identify genetic markers associated with this progression measure. Methods We generated a progression score on the basis of principal component analysis of prospectively acquired longitudinal changes in motor, cognitive, and imaging measures in the 218 indivduals in the TRACK-HD cohort of Huntington's disease gene mutation carriers (data collected 2008–11). We generated a parallel progression score using data from 1773 previously genotyped participants from the European Huntington's Disease Network REGISTRY study of Huntington's disease mutation carriers (data collected 2003–13). We did a genome-wide association analyses in terms of progression for 216 TRACK-HD participants and 1773 REGISTRY participants, then a meta-analysis of these results was undertaken. Findings Longitudinal motor, cognitive, and imaging scores were correlated with each other in TRACK-HD participants, justifying use of a single, cross-domain measure of disease progression in both studies. The TRACK-HD and REGISTRY progression measures were correlated with each other (r=0·674), and with age at onset (TRACK-HD, r=0·315; REGISTRY, r=0·234). The meta-analysis of progression in TRACK-HD and REGISTRY gave a genome-wide significant signal (p=1·12 × 10−10) on chromosome 5 spanning three genes: MSH3, DHFR, and MTRNR2L2. The genes in this locus were associated with progression in TRACK-HD (MSH3 p=2·94 × 10−8 DHFR p=8·37 × 10−7 MTRNR2L2 p=2·15 × 10−9) and to a lesser extent in REGISTRY (MSH3 p=9·36 × 10−4 DHFR p=8·45 × 10−4 MTRNR2L2 p=1·20 × 10−3). The lead single nucleotide polymorphism (SNP) in TRACK-HD (rs557874766) was genome-wide significant in the meta-analysis (p=1·58 × 10−8), and encodes an aminoacid change (Pro67Ala) in MSH3. In TRACK-HD, each copy of the minor allele at this SNP was associated with a 0·4 units per year (95% CI 0·16–0·66) reduction in the rate of change of the Unified Huntington's Disease Rating Scale (UHDRS) Total Motor Score, and a reduction of 0·12 units per year (95% CI 0·06–0·18) in the rate of change of UHDRS Total Functional Capacity score. These associations remained significant after adjusting for age of onset. Interpretation The multidomain progression measure in TRACK-HD was associated with a functional variant that was genome-wide significant in our meta-analysis. The association in only 216 participants implies that the progression measure is a sensitive reflection of disease burden, that the effect size at this locus is large, or both. Knockout of Msh3 reduces somatic expansion in Huntington's disease mouse models, suggesting this mechanism as an area for future therapeutic investigation