Alternating Current Electrophoretic Deposition of Hydroxyapatite Composite Coating on Mg-0.8wt.%Ca-3%wt.%Zn alloy

The present work investigates the AC electrophoretic deposition of nano-sized  HAP composite coating on Mg-0.8wt.%Ca-3%wt.%Zn alloy.  Nano HAP powder was prepared using hydrothermal microwave assisted technique. HAP coating is deposited electrophoretically from dispersing medium (ETELAC) forming composite coating on the alloy surface.  Electrophoretic deposition experiments were conducted as single run (S), double run (D) and multirun (M). The properties of HAP coating regarding adhesion, morphology and corrosion behavior were thoroughly investigated.Results show that the best coating regarding the weight gain as well as the morphology was obtained from multi run (M) experiments of  5%HAP and 5% ETELAC at 200 V under 150 rpm stirring.  Electrochemical Impedance (EIS) investigation show that HAP composite coating posses a high corrosion resistance compared to the substrate alloy.  The mechanism of HAP/ETELAC coating formation was thoroughly discussed

Water/oil nanoemulsion-based synthesis of Bi_xSn_6-2xS_y (0.33 ≤ × ≤ 2.95) semiconductor QDs for efficient photocatalytic degradation of MB dye

The development of efficient photocatalysts for the photodegradation of organic dyes in wastewater is highly worthwhile. Herein, the nanoemulsion tactic was utilized to synthesize BixSn6-2xSy (0.33 ≤ x ≤ 2.95) photocatalysts with morphological structures that changed from nanowhiskers to quantum dots (QDs). The optical properties of these materials were examined by UV-visible absorbance spectroscopy and photoluminescence, while Mott-Schottky analysis was utilized to study their electronic properties. BixSn6-2xSy materials exhibit appreciable absorption in the UV-visible light range with a direct band gap that increases from 1.23 to 1.46 eV. Both crystal structure and composition greatly affect the photocatalytic activity of BixSn6-2xSy semiconductors. Among the various synthesized photocatalysts, BiSn4S4.5 can efficiently photodegrade methylene blue dye (MB) in the shortest time under UV-visible light. The photocatalytic activity is positively affected by the change of crystal structure from orthorhombic to cubic symmetry. Based on the Mott-Schottky plots, the flat band potential (Efb) and the semiconductor behavior of the fabricated BixSn6-2xSy nanomaterials were determined. The obtained Efb values for SnS, Bi0.33Sn5.34S5.8, BiSn4S5.5, and Bi2.14Sn1.71S4.7 are -0.18 V, -0.42 V, -0.53 V, and -0.51 V (vs. Ag/AgCl), respectively. The Efb value is clearly shifted towards more negative potential values with increasing the Bi molar ratio (x). However, Bi2.95Sn0.1S4.5 semiconductor was found to be of n-type character, having a positive Efb value of +0.66 V (vs. Ag/AgCl). Photocurrent and EIS responses confirm the high stability and photocatalytic activity of BiSn4S5.5, which also achieves the lowest charge transfer resistance. The modified electronic properties of the BixSn6-2xSy semiconductors significantly improve their photocatalytic activity, rendering them to be promising absorbers for sunlight harvesting applications.</p

Advanced Protective Films Based on Binary ZnO-NiO@polyaniline Nanocomposite for Acidic Chloride Steel Corrosion: An Integrated Study of Theoretical and Practical Investigations

Due to their thermal stability characteristics, polymer/composite materials have typically been employed as corrosion inhibitors in a variety of industries, including the maritime, oil, and engineering sectors. Herein, protective films based on binary ZnO-NiO@polyaniline (ZnNiO@PANE) nanocomposite were intended with a respectable yield. The produced nanocomposite was described using a variety of spectroscopic characterization methods, including dynamic light scattering (DLS), ultraviolet&ndash;visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) approaches, in addition to other physicochemical methods, including X-ray powder diffraction (XRD), transmission Electron Microscopy (TEM), field emission scanning electron microscopy (FESEM), and selected area electron diffraction (SAED). By using open-circuit potentials (OCP) vs. time, electrochemical impedance spectroscopic (EIS), and potentiodynamic polarization (PDP) methods, the inhibitory effects of individual PANE and ZnNiO@PANE on the mild steel alloy corrosion in HCl/NaCl solution were assessed. The ZnNiO@PANE composite performed as mixed-type inhibitors, according to PDP findings. PANE polymer and ZnNiO@PANE composite at an optimal dose of 200 mg/L each produced protective abilities of 84.64% and 97.89%, respectively. The Langmuir isotherm model is used to explain the adsorption of ZnNiO@PANE onto MS alloy. DFT calculations showed that the prepared materials&rsquo; efficiency accurately reflects their ability to contribute electrons, whereas Monte Carlo (MC) simulations showed that the suitability and extent of adsorption of the ZnNiO@PANE molecule at the metal interface determine the materials&rsquo; corrosion protection process