56 research outputs found
Novel Ba-hexaferrite structural variations stabilized on the nanoscale as building blocks for epitaxial bi-magnetic hard/soft sandwiched maghemite/hexaferrite/maghemite nanoplatelets with out-of-plane easy axis and enhanced magnetization
Atomic-resolution scanning-transmission electron microscopy showed that barium hexaferrite (BHF) nanoplatelets display a distinct structure, which represents a novel structural variation of hexaferrites stabilized on the nanoscale. The structure can be presented in terms of two alternating structural blocks stacked across the nanoplatelet: a hexagonal (BaFeO) R block and a cubic (FeO) spinel S block. The structure of the BHF nanoplatelets comprises only two, or rarely three, R blocks and always terminates at the basal surfaces with the full S blocks. The structure of a vast majority of the nanoplatelets can be described with a SR∗S∗RS stacking order, corresponding to a BaFeO composition. The nanoplatelets display a large, uniaxial magnetic anisotropy with the easy axis perpendicular to the platelet, which is a crucial property enabling different novel applications based on aligning the nanoplatelets with applied magnetic fields. However, the BHF nanoplatelets exhibit a modest saturation magnetization, M, of just over 30 emu g. Given the cubic S block termination of the platelets, layers of maghemite, γ-FeO, (M), with a cubic spinel structure, can be easily grown epitaxially on the surfaces of the platelets, forming a sandwiched M/BHF/M platelet structure. The exchange-coupled composite nanoplatelets exhibit a remarkably uniform structure, with an enhanced M of more than 50 emu g while essentially maintaining the out-of-plane easy axis. The enhanced M could pave the way for their use in diverse platelet-based magnetic applications
Markov Properties of Electrical Discharge Current Fluctuations in Plasma
Using the Markovian method, we study the stochastic nature of electrical
discharge current fluctuations in the Helium plasma. Sinusoidal trends are
extracted from the data set by the Fourier-Detrended Fluctuation analysis and
consequently cleaned data is retrieved. We determine the Markov time scale of
the detrended data set by using likelihood analysis. We also estimate the
Kramers-Moyal's coefficients of the discharge current fluctuations and derive
the corresponding Fokker-Planck equation. In addition, the obtained Langevin
equation enables us to reconstruct discharge time series with similar
statistical properties compared with the observed in the experiment. We also
provide an exact decomposition of temporal correlation function by using
Kramers-Moyal's coefficients. We show that for the stationary time series, the
two point temporal correlation function has an exponential decaying behavior
with a characteristic correlation time scale. Our results confirm that, there
is no definite relation between correlation and Markov time scales. However
both of them behave as monotonic increasing function of discharge current
intensity. Finally to complete our analysis, the multifractal behavior of
reconstructed time series using its Keramers-Moyal's coefficients and original
data set are investigated. Extended self similarity analysis demonstrates that
fluctuations in our experimental setup deviates from Kolmogorov (K41) theory
for fully developed turbulence regime.Comment: 25 pages, 9 figures and 4 tables. V3: Added comments, references,
figures and major correction
Synthesis and characterization of ZnO nanostructures using palm olein as biotemplate
Background:
A green approach to synthesize nanomaterials using biotemplates has been subjected to intense research due to several advantages. Palm olein as a biotemplate offers the benefits of eco-friendliness, low-cost and scale-up for large scale production. Therefore, the effect of palm olein on morphology and surface properties of ZnO nanostructures were investigated.
Results:
The results indicate that palm olein as a biotemplate can be used to modify the shape and size of ZnO particles synthesized by hydrothermal method. Different morphology including flake-, flower- and three dimensional star-like structures were obtained. FTIR study indicated the reaction between carboxyl group of palm olein and zinc species had taken place. Specific surface area enhanced while no considerable change were observed in optical properties.
Conclusion:
Phase-pure ZnO particles were successfully synthesized using palm olein as soft biotemplating agent by hydrothermal method. The physico-chemical properties of the resulting ZnO particles can be tuned using the ratio of palm olein to Zn cation
Overview of the TCV tokamak experimental programme
The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with \u27small\u27 (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations
Operating a full tungsten actively cooled tokamak: overview of WEST first phase of operation
WEST is an MA class superconducting, actively cooled, full tungsten (W) tokamak, designed to operate in long pulses up to 1000 s. In support of ITER operation and DEMO conceptual activities, key missions of WEST are: (i) qualification of high heat flux plasma-facing components in integrating both technological and physics aspects in relevant heat and particle exhaust conditions, particularly for the tungsten monoblocks foreseen in ITER divertor; (ii) integrated steady-state operation at high confinement, with a focus on power exhaust issues. During the phase 1 of operation (2017–2020), a set of actively cooled ITER-grade plasma facing unit prototypes was integrated into the inertially cooled W coated startup lower divertor. Up to 8.8 MW of RF power has been coupled to the plasma and divertor heat flux of up to 6 MW m−2 were reached. Long pulse operation was started, using the upper actively cooled divertor, with a discharge of about 1 min achieved. This paper gives an overview of the results achieved in phase 1. Perspectives for phase 2, operating with the full capability of the device with the complete ITER-grade actively cooled lower divertor, are also described
Physics research on the TCV tokamak facility: from conventional to alternative scenarios and beyond
The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device’s unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power ‘starvation’ reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in–out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added
A fluid model of the current-voltage characteristics of an electron emitting electrode immersed in a two electron temperature plasma
The current voltage characteristics of a negatively biased
electron emitting electrode immersed in a two-electron temperature
plasma are analyzed by a simple one dimensional fluid model. Based
on the assumption that the electron density in the pre-sheath
region obeys the Boltzmann law the Bohm criterion is derived in
the form of a transcendental equation for the Mach number, which
can have up to 3 solutions. According to these solutions the ion
velocity at the sheath edge can be determined either by the hot or
by the cool electron temperature. When it is determined by the
cool electron temperature and the hot electron temperature is high
enough the critical electron emission current from the collector
can have a very pronounced local maximum and a minimum when
regarded as a function of the electrode potential. Because of that
the current voltage characteristics of the electrode may exhibit
up to 3 different floating potentials. This result is in good
agreement with the experimental observations reported in [J. Appl. Phys. 63, 5674 (1988)]
Pre-sheath formation in an oblique magnetic field: fluid model and PIC simulation
We present some results of a one-dimensional fluid model with a floating electrode immersed in plasma with magnetic field applied at an oblique angle. The model equations are integrated numerically in order to find the space profiles of the ion velocities and electrostatic potential for various strenghts and angles of the magnetic field. We assume a collisionless magnetized pre-sheath with isothermal ions. The results are then compared with the spatial profiles obtained by a computer simulation. We use a BIT1 particle-in-cell code. The simulations input parameters are chosen in the way, that they resemble the fluid model as much as possible. Because the results of the simulation are given in the absolute SI units, they have to be normalized correctly. We evaluate the model results and compare them with the computer simulation results. Special attention is brought on formation of the pre-sheath with magnetic field applied at intermediate angles. The results of the simulation are in good qualitative agreement with the model
- …