205 research outputs found
Re-engineering a nanodosimetry Monte Carlo code into Geant4: software design and first results
A set of physics models for nanodosimetry simulation is being re-engineered
for use in Geant4-based simulations. This extension of Geant4 capabilities is
part of a larger scale R&D project for multi-scale simulation involving
adaptable, co-working condensed and discrete transport schemes. The project in
progress reengineers the physics modeling capabilities associated with an
existing FORTRAN track-structure code for nanodosimetry into a software design
suitable to collaborate with an object oriented simulation kernel. The first
experience and results of the ongoing re-engineering process are presented.Comment: 4 pages, 2 figures and images, to appear in proceedings of the
Nuclear Science Symposium and Medical Imaging Conference 2009, Orland
Quark-diquark model for p(\bar p)-p elastic scattering at high energies
A model for elastic scattering of protons at high energies based on the
quark-diquark representation of the proton is discussed. The predictions of the
model are compared with experimental data for the differential elastic
cross-sections from available databasesComment: 4 pages, 5 figure
GEANT4 simulation of phase rotation for neutrino factory
We discuss a GEANT4 simulation of the phase rotation system for a neutrino factory. The comparison with the beam transport code PATH shows a good agreement. Preliminary results for the energy disposition in the cryostat of the superconducting 1.8 T solenoid are briefly presented
QCD in the nuclear medium and effects due to Cherenkov gluons
The equations of in-medium gluodynamics are proposed. Their classical lowest
order solution is explicitly shown for a color charge moving with constant
speed. For nuclear permittivity larger than 1 it describes emission of
Cherenkov gluons resembling results of classical electrodynamics. The values of
the real and imaginary parts of the nuclear permittivity are obtained from the
fits to experimental data on the double-humped structure around the away-side
jet obtained at RHIC. The dispersion of the nuclear permittivity is predicted
by comparing the RHIC, SPS and cosmic ray data. This is important for LHC
experiments. Cherenkov gluons may be responsible for the asymmetry of dilepton
mass spectra near rho-meson, observed in the SPS experiment with excess in the
low-mass wing of the resonance. This feature is predicted to be common for all
resonances. The "color rainbow" quantum effect might appear according to higher
order terms of in-medium QCD if the nuclear permittivity depends on color.Comment: 29 p., 4 figs; for "Phys. Atom. Nucl." volume dedicated to 80th
birthday of L.B. Okun; minor corrections on pp. 11 and 13 in v
Transition Radiation Spectra of Electrons from 1 to 10 GeV/c in Regular and Irregular Radiators
We present measurements of the spectral distribution of transition radiation
generated by electrons of momentum 1 to 10 GeV/c in different radiator types.
We investigate periodic foil radiators and irregular foam and fiber materials.
The transition radiation photons are detected by prototypes of the drift
chambers to be used in the Transition Radiation Detector (TRD) of the ALICE
experiment at CERN, which are filled with a Xe, CO2 (15 %) mixture. The
measurements are compared to simulations in order to enhance the quantitative
understanding of transition radiation production, in particular the momentum
dependence of the transition radiation yield.Comment: 18 pages, 15 figures, submitted to Nucl. Instr. Meth. Phys. Res.
Forward production of charged pions with incident on nuclear targets measured at the CERN PS
Measurements of the double-differential production cross-section
in the range of momentum 0.5 \GeVc \leq p \le 8.0 \GeVc and angle 0.025 \rad
\leq \theta \le 0.25 \rad in interactions of charged pions on beryllium,
carbon, aluminium, copper, tin, tantalum and lead are presented. These data
represent the first experimental campaign to systematically measure forward
pion hadroproduction. The data were taken with the large acceptance HARP
detector in the T9 beam line of the CERN PS. Incident particles, impinging on a
5% nuclear interaction length target, were identified by an elaborate system of
beam detectors. The tracking and identification of the produced particles was
performed using the forward spectrometer of the HARP detector. Results are
obtained for the double-differential cross-sections mainly at four incident pion beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). The measurements are compared
with the GEANT4 and MARS Monte Carlo simulationComment: to be published on Nuclear Physics
Absolute Momentum Calibration of the HARP TPC
In the HARP experiment the large-angle spectrometer is using a cylindrical
TPC as main tracking and particle identification detector. The momentum scale
of reconstructed tracks in the TPC is the most important systematic error for
the majority of kinematic bins used for the HARP measurements of the
double-differential production cross-section of charged pions in proton
interactions on nuclear targets at large angle. The HARP TPC operated with a
number of hardware shortfalls and operational mistakes. Thus it was important
to control and characterize its momentum calibration. While it was not possible
to enter a direct particle beam into the sensitive volume of the TPC to
calibrate the detector, a set of physical processes and detector properties
were exploited to achieve a precise calibration of the apparatus. In the
following we recall the main issues concerning the momentum measurement in the
HARP TPC, and describe the cross-checks made to validate the momentum scale. As
a conclusion, this analysis demonstrates that the measurement of momentum is
correct within the published precision of 3%.Comment: To be published by JINS
Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets
The HARP collaboration has presented measurements of the double-differential
pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800
MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin
nuclear targets. In many applications the extrapolation to long targets is
necessary. In this paper the analysis of data taken with long (one interaction
length) solid cylindrical targets made of carbon, tantalum and lead is
presented. The data were taken with the large acceptance HARP detector in the
T9 beam line of the CERN PS. The secondary pions were produced by beams of
protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and
identification of the produced particles were performed using a small-radius
cylindrical time projection chamber (TPC) placed inside a solenoidal magnet.
Incident protons were identified by an elaborate system of beam detectors.
Results are obtained for the double-differential yields per target nucleon d2
sigma / dp dtheta. The measurements are compared with predictions of the MARS
and GEANT4 Monte Carlo simulations.Comment: 43 pages, 20 figure
- …