939 research outputs found
Phenomenology of a three-family model with gauge symmetry SU(3)_c X SU(4)_L X U(1)_X
We study an extension of the gauge group SU(3)_c X SU(2)_L X U(1)_Y of the
standard model to the symmetry group SU(3)_c X SU(4)_L X U(1)_X (3-4-1 for
short). This extension provides an interesting attempt to answer the question
of family replication in the sense that models for the electroweak interaction
can be constructed so that anomaly cancellation is achieved by an interplay
between generations, all of them under the condition that the number of
families must be divisible by the number of colours of SU(3)_c. This method of
anomaly cancellation requires a family of quarks transforming differently from
the other two, thus leading to tree-level flavour changing neutral currents
(FCNC) transmitted by the two extra neutral gauge bosons and
predicted by the model. In a version of the 3-4-1 extension, which does not
contain particles with exotic electric charges, we study the fermion mass
spectrum and some aspects of the phenomenology of the neutral gauge boson
sector. In particular, we impose limits on the mixing angle and on the
mass scale of the corresponding physical new neutral gauge boson , and
establish a lower bound on the mass of the additional new neutral gauge boson
. For the analysis we use updated precision electroweak data at
the Z-pole from the CERN LEP and SLAC Linear Collider, and atomic parity
violation data. The mass scale of the additional new neutral gauge boson
is constrained by using updated experimental inputs from neutral meson mixing
in the analysis of the sources of FCNC in the model. The data constrain the
mixing angle to a very small value of O(0.001), and the lower bounds on
and on are found to be of O(1 TeV) and of O(7 TeV),
repectively.Comment: 22 pages, 6 tables, 1 figure. To appear in J. Phys. G: Nuclear and
Particle Physic
Minimal Scalar Sector of 3-3-1 Models without Exotic Electric Charges
We study the minimal set of Higgs scalars, for models based on the local
gauge group which do not contain
particles with exotic electric charges. We show that only two Higgs
triplets are needed in order to properly break the symmetry. The exact
tree-level scalar mass matrices resulting from symmetry breaking are calculated
at the minimum of the most general scalar potential, and the gauge bosons are
obtained, together with their couplings to the physical scalar fields. We show
how the scalar sector introduced is enough to produce masses for fermions in a
particular model which is an subgroup. By using experimental results we
constrain the scale of new physics to be above 1.3 TeV.Comment: LaTeX, 22 pages, 1 figure include
Radiation tolerant VLSI circuits in standard deep submicron CMOS technologies for the LHC experiments: practical design aspects
We discuss design issues related to the extensive use of Enclosed Layout Transistors (ELT's) and guard rings in deep submicron CMOS technologies in order to improve radiation tolerance of ASIC's designed for the LHC experiments (the Large Hadron Collider at present under construction at CERN). We present novel aspects related to the use of ELT's: noise measured before and after irradiation up to 100 Mrad (SiO/sub 2/), a model to calculate the W/L ratio and matching properties of these devices. Some conclusions concerning the density and the speed of IC's conceived with this design approach are finally drawn. (16 refs)
Time-of-flight and activation experiments on 147Pm and 171Tm for astrophysics
The neutron capture cross section of several key unstable isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n,γ) measurement, for which high neutron fluxes and effective background rejection capabilities are required. As part of a new program to measure some of these important branching points, radioactive targets of 147Pm and 171Tm have been produced by irradiation of stable isotopes at the ILL high flux reactor. Neutron capture on 146Nd and 170Er at the reactor was followed by beta decay and the resulting matrix was purified via radiochemical separation at PSI. The radioactive targets have been used for time-of-flight measurements at the CERN n-TOF facility using the 19 and 185 m beam lines during 2014 and 2015. The capture cascades were detected using a set of four C6D6 scintillators, allowing to observe the associated neutron capture resonances. The results presented in this work are the first ever determination of the resonance capture cross section of 147Pm and 171Tm. Activation experiments on the same 147Pm and 171Tm targets with a high-intensity 30 keV quasi-Maxwellian flux of neutrons will be performed using the SARAF accelerator and the Liquid-Lithium Target (LiLiT) in order to extract the corresponding Maxwellian Average Cross Section (MACS). The status of these experiments and preliminary results will be presented and discussed as well
High-accuracy determination of the U 238 / U 235 fission cross section ratio up to ≈1 GeV at n-TOF at CERN
Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOIThe U238 to U235 fission cross section ratio has been determined at n-TOF up to ≈1 GeV, with two different detection systems, in different geometrical configurations. A total of four datasets has been collected and compared. They are all consistent to each other within the relative systematic uncertainty of 3-4%. The data collected at n-TOF have been suitably combined to yield a unique fission cross section ratio as a function of neutron energy. The result confirms current evaluations up to 200 MeV. Good agreement is also observed with theoretical calculations based on the INCL++/Gemini++ combination up to the highest measured energy. The n-TOF results may help solve a long-standing discrepancy between the two most important experimental datasets available so far above 20 MeV, while extending the neutron energy range for the first time up to ≈1 GeV.Peer reviewedFinal Published versio
Characterization of the n-TOF EAR-2 neutron beam
The experimental area 2 (EAR-2) at CERNs neutron time-of-flight facility (n-TOF), which is operational since 2014, is designed and built as a short-distance complement to the experimental area 1 (EAR-1). The Parallel Plate Avalanche Counter (PPAC) monitor experiment was performed to characterize the beam prole and the shape of the neutron 'ux at EAR-2. The prompt γ-flash which is used for calibrating the time-of-flight at EAR-1 is not seen by PPAC at EAR-2, shedding light on the physical origin of this γ-flash
High accuracy 234U(n,f) cross section in the resonance energy region
New results are presented of the 234U neutron-induced fission cross section, obtained with high accuracy in the resonance region by means of two methods using the 235U(n,f) as reference. The recent evaluation of the 235U(n,f) obtained with SAMMY by L. C. Leal et al. (these Proceedings), based on previous n-TOF data [1], has been used to calculate the 234U(n,f) cross section through the 234U/235U ratio, being here compared with the results obtained by using the n-TOF neutron flux
Measurement of the 12C(n,p)12B cross section at n-TOF at CERN by in-beam activation analysis
The integral cross section of the 12C(n,p)12B reaction has been determined for the first time in the neutron energy range from threshold to several GeV at the n-TOF facility at CERN. The measurement relies on the activation technique with the β decay of 12B measured over a period of four half-lives within the same neutron bunch in which the reaction occurs. The results indicate that model predictions, used in a variety of applications, are mostly inadequate. The value of the integral cross section reported here can be used as a benchmark for verifying or tuning model calculations.Peer reviewedFinal Accepted Versio
High-accuracy determination of the neutron flux in the new experimental area n_TOF-EAR2 at CERN
A new high flux experimental area has recently become operational at the n_TOF facility at CERN. This new measuring station, n_TOF-EAR2, is placed at the end of a vertical beam line at a distance of approximately 20m from the spallation target. The characterization of the neutron beam, in terms of flux, spatial profile and resolution function, is of crucial importance for the feasibility study and data analysis of all measurements to be performed in the new area. In this paper, the measurement of the neutron flux, performed with different solid-state and gaseous detection systems, and using three neutron-converting reactions considered standard in different energy regions is reported. The results of the various measurements have been combined, yielding an evaluated neutron energy distribution in a wide energy range, from 2meV to 100MeV, with an accuracy ranging from 2%, at low energy, to 6% in the high-energy region. In addition, an absolute normalization of the n_TOF-EAR2 neutron flux has been obtained by means of an activation measurement performed with 197Au foils in the beam.Peer reviewe
- …