Links between topography, wind, deflation, lakes and dust: The case of the Bodélé Depression, Chad

The Bodélé Depression, Chad is the planet's largest single source of dust. Deflation from the Bodélé could be seen as a simple coincidence of two key prerequisites: strong surface winds and a large source of suitable sediment. But here we hypothesise that long term links between topography, winds, deflation and dust ensure the maintenance of the dust source such that these two apparently coincidental key ingredients are connected by land-atmosphere processes with topography acting as the overall controlling agent. We use a variety of observational and numerical techniques, including a regional climate model, to show that: 1) contemporary deflation from the Bodélé is delineated by topography and a surface wind stress maximum; 2) the Tibesti and Ennedi mountains play a key role in the generation of the erosive winds in the form of the Bodélé Low Level Jet (LLJ); 3) enhanced deflation from a stronger Bodélé LLJ during drier phases, for example, the Last Glacial Maximum, was probably sufficient to create the shallow lake in which diatoms lived during wetter phases, such as the Holocene pluvial. Winds may therefore have helped to create the depression in which erodible diatom material accumulated. Instead of a simple coincidence of nature, dust from the world's largest source may result from the operation of long term processes on paleo timescales which have led to ideal conditions for dust generation in the world's largest dust source. Similar processes plausibly operate in other dust hotspots in topographic depressions

Monitoring the impact of desert dust outbreaks for air quality for health studies

We review the major features of desert dust outbreaks that are relevant to the assessment of dust impacts upon human health. Our ultimate goal is to provide scientific guidance for the acquisition of relevant population exposure information for epidemiological studies tackling the short and long term health effects of desert dust. We first describe the source regions and the typical levels of dust particles in regions close and far away from the source areas, along with their size, composition, and bio-aerosol load. We then describe the processes by which dust may become mixed with anthropogenic particulate matter (PM) and/or alter its load in receptor areas. Short term health effects are found during desert dust episodes in different regions of the world, but in a number of cases the results differ when it comes to associate the effects to the bulk PM, the desert dust-PM, or non-desert dust-PM. These differences are likely due to the different monitoring strategies applied in the epidemiological studies, and to the differences on atmospheric and emission (natural and anthropogenic) patterns of desert dust around the world. We finally propose methods to allow the discrimination of health effects by PM fraction during dust outbreaks, and a strategy to implement desert dust alert and monitoring systems for health studies and air quality management.The systematic review was funded by WHO with as part of a Grant Agreement with Ministry of Foreign Affairs, Norway. Thanks are also given to the Spanish Ministry for the Ecological Transition for long term support in the last 2 decades to our projects on African dust effects on air quality over Spain; to the Spanish Ministry of Science, Innovation and Universities and FEDER Funds for the HOUSE project (CGL2016-78594-R), and to the Generalitat de Catalunya (AGAUR 2017 SGR41). Carlos Pérez García-Pando acknowledges long-term support from the AXA Research Fund, as well as the support received through the Ramón y Cajal program (grant RYC-2015-18690) of the Spanish Ministry of Science, Innovation and Universities.Peer ReviewedPostprint (published version

Generalized Weierstrass Relations and Frobenius reciprocity

This article investigates local properties of the further generalized Weierstrass relations for a spin manifold $S$ immersed in a higher dimensional spin manifold $M$ from viewpoint of study of submanifold quantum mechanics. We show that kernel of a certain Dirac operator defined over $S$, which we call submanifold Dirac operator, gives the data of the immersion. In the derivation, the simple Frobenius reciprocity of Clifford algebras $S$ and $M$ plays important roles.Comment: 17pages. to be published in Mathematical Physics, Analysis and Geometr

The Dirac operator on untrapped surfaces

We establish a sharp extrinsic lower bound for the first eigenvalue of the Dirac operator of an untrapped surface in initial data sets without apparent horizon in terms of the norm of its mean curvature vector. The equality case leads to rigidity results for the constraint equations with spherical boundary as well as uniqueness results for constant mean curvature surfaces in Minkowski space.Comment: 16 page

The effect of harmonized emissions on aerosol properties in global models – an AeroCom experiment

The effects of unified aerosol sources on global aerosol fields simulated by different models are examined in this paper. We compare results from two AeroCom experiments, one with different (ExpA) and one with unified emissions, injection heights, and particle sizes at the source (ExpB). Surprisingly, harmonization of aerosol sources has only a small impact on the simulated diversity for aerosol burden, and consequently optical properties, as the results are largely controlled by model-specific transport, removal, chemistry (leading to the formation of secondary aerosols) and parameterizations of aerosol microphysics (e.g. the split between deposition pathways) and to a lesser extent on the spatial and temporal distributions of the (precursor) emissions. The burdens of black carbon and especially sea salt become more coherent in ExpB only, because the large ExpA diversity for these two species was caused by few outliers. The experiment also indicated that despite prescribing emission fluxes and size distributions, ambiguities in the implementation in individual models can lead to substantial differences. These results indicate the need for a better understanding of aerosol life cycles at process level (including spatial dispersal and interaction with meteorological parameters) in order to obtain more reliable results from global aerosol simulations. This is particularly important as such model results are used to assess the consequences of specific air pollution abatement strategies

Analysis and quantification of the diversities of aerosol life cycles within AeroCom

Simulation results of global aerosol models have been assembled in the framework of the AeroCom intercomparison exercise. In this paper, we analyze the life cycles of dust, sea salt, sulfate, black carbon and particulate organic matter as simulated by sixteen global aerosol models. The diversities among the models for the sources and sinks, burdens, particle sizes, water uptakes, and spatial dispersals have been established. These diversities have large consequences for the calculated radiative forcing and the aerosol concentrations at the surface. The AeroCom all-models-average emissions are dominated by the mass of sea salt (SS), followed by dust (DU), sulfate (SO_4), particulate organic matter (POM), and finally black carbon (BC). Interactive parameterizations of the emissions and contrasting particles sizes of SS and DU lead generally to higher diversities of these species, and for total aerosol. The lower diversity of the emissions of the fine aerosols, BC, POM, and SO_4, is due to the use of similar emission inventories, and does therefore not necessarily indicate a better understanding of their sources. The diversity of SO_4-sources is mainly caused by the disagreement on depositional loss of precursor gases and on chemical production. The diversities of the emissions are passed on to the burdens, but the latter are also strongly affected by the model-specific treatments of transport and aerosol processes. The burdens of dry masses decrease from largest to smallest: DU, SS, SO_4, POM, and BC. The all-models-average residence time is shortest for SS with about half a day, followed by S_O4 and DU with four days, and POM and BC with six and seven days, respectively. The wet deposition rate is controlled by the solubility and increases from DU, BC, POM to SO_4 and SS. It is the dominant sink for SO_4, BC, and POM, and contributes about one third to the total removal rate coefficients of SS and DU species. For SS and DU we find high diversities for the removal rate coefficients and deposition pathways. Models do neither agree on the split between wet and dry deposition, nor on that between sedimentation and turbulent dry Deposition. We diagnose an extremely high diversity for the uptake of ambient water vapor that influences the particle size and thus the sink rate coefficients. Furthermore, we find little agreement among the model results for the partitioning of wet removal into scavenging by convective and stratiform rain. Large differences exist for aerosol dispersal both in the vertical and in the horizontal direction. In some models, a minimum of total aerosol concentration is simulated at the surface. Aerosol dispersal is most pronounced for SO4 and BC and lowest for SS. Diversities are higher for meridional than for vertical dispersal, they are similar for a given species and highest for SS and DU. For these two components we do not find a correlation between vertical and meridional aerosol dispersal. In addition the degree of dispersals of SS and DU is not related to their residence times. SO_4, BC, and POM, however, show increased meridional dispersal in models with larger vertical dispersal, and dispersal is larger for longer simulated residence times

An AeroCom initial assessment – optical properties in aerosol component modules of global models

The AeroCom exercise diagnoses multi-component aerosol modules in global modeling. In an initial assessment simulated global distributions for mass and mid-visible aerosol optical thickness (aot) were compared among 20 different modules. Model diversity was also explored in the context of previous comparisons. For the component combined aot general agreement has improved for the annual global mean. At 0.11 to 0.14, simulated aot values are at the lower end of global averages suggested by remote sensing from ground (AERONET ca. 0.135) and space (satellite composite ca. 0.15). More detailed comparisons, however, reveal that larger differences in regional distribution and significant differences in compositional mixture remain. Of particular concern are large model diversities for contributions by dust and carbonaceous aerosol, because they lead to significant uncertainty in aerosol absorption (aab). Since aot and aab, both, influence the aerosol impact on the radiative energy-balance, the aerosol (direct) forcing uncertainty in modeling is larger than differences in aot might suggest. New diagnostic approaches are proposed to trace model differences in terms of aerosol processing and transport: These include the prescription of common input (e.g. amount, size and injection of aerosol component emissions) and the use of observational capabilities from ground (e.g. measurements networks) or space (e.g. correlations between aerosol and clouds)

Emissions of primary aerosol and precursor gases in the year 2000 and 1750 prescribed data-sets for AeroCom.

Inventories for global aerosol and aerosol precursor emissions have been collected (based on published inventories and published simulations), assessed and prepared for the year 2000 (present-day conditions) and for the year 1750 (pre-industrial conditions). These global datasets establish a comprehensive source for emission input to global modeling, when simulating the aerosol impact on climate with state-of-the-art aerosol component modules. As these modules stratify aerosol into dust, sea-salt, sulfate, organic matter and soot, for all these aerosol types global fields on emission strength and recommendations for injection altitude and particulate size are provided. Temporal resolution varies between daily (dust and sea-salt), monthly (wild-land fires) and annual (all other emissions). These datasets benchmark aerosol emissions according to the knowledge in the year 2004. They are intended to serve as systematic constraints in sensitivity studies of the AeroCom initiative, which seeks to quantify (actual) uncertainties in aerosol global modeling

Trace gas/aerosol boundary concentrations and their impacts on continental-scale AQMEII modeling domains

Copyright 2011 Elsevier B.V., All rights reserved.Over twenty modeling groups are participating in the Air Quality Model Evaluation International Initiative (AQMEII) in which a variety of mesoscale photochemical and aerosol air quality modeling systems are being applied to continental-scale domains in North America and Europe for 2006 full-year simulations for model inter-comparisons and evaluations. To better understand the reasons for differences in model results among these participating groups, each group was asked to use the same source of emissions and boundary concentration data for their simulations. This paper describes the development and application of the boundary concentration data for this AQMEII modeling exercise. The European project known as GEMS (Global and regional Earth-system Monitoring using Satellite and in-situ data) has produced global-scale re-analyses of air quality for several years, including 2006 (http://gems.ecmwf.int). The GEMS trace gas and aerosol data were made available at 3-hourly intervals on a regular latitude/longitude grid of approximately 1.9° resolution within 2 "cut-outs" from the global model domain. One cut-out was centered over North America and the other over Europe, covering sufficient spatial domain for each modeling group to extract the necessary time- and space-varying (horizontal and vertical) concentrations for their mesoscale model boundaries. Examples of the impact of these boundary concentrations on the AQMEII continental simulations are presented to quantify the sensitivity of the simulations to boundary concentrations. In addition, some participating groups were not able to use the GEMS data and instead relied upon other sources for their boundary concentration specifications. These are noted, and the contrasting impacts of other data sources for boundary data are presented. How one specifies four-dimensional boundary concentrations for mesoscale air quality simulations can have a profound impact on the model results, and hence, this aspect of data preparation must be performed with considerable care.Peer reviewedFinal Accepted Versio