47 research outputs found
Using alignment with corporate strategy for the selection of a project portfolio based on ANP
Trabajo presentado al 14th International Symposium on the Analytic Hierarchy Process celebrado en Washington (US) del 29 de junio al 2 de julio de 2014.In this paper a new approach to prioritize project portfolio in an efficient and reliable way is presented. The research methodology is based on a combination of a synthesis of the literature across the diverse fields of project management, project alignment, multicriteria decision methods and a parallel analysis of an industrial case study. The paper introduces a rigorous methodology with acceptable complexity which seeks to assist managers of the National Electricity Corporation of Venezuela (Corpoelec) in their yearly resources' assignment on their projects portfolio. The aim being to determine the degree of alignment of each project to corporate strategy based on the judgments of a group of experts on the expected contribution of the projects to the business strategic objectives. The model presented can be used both as a descriptive and a prescriptive model. The approach presented uses project prioritization based on the multi-criteria decisionmaking technique called Analytic Network Process. Thus the corporate strategic objectives will be used as prioritization criteria to obtain the Relative Alignment Index (RAI).Peer Reviewe
A 3D REPOSITORY OF DINOSAUR TEETH: THE GENERATION OF OPEN RESOURCES FOR THE CLASSIFICATION AND IDENTIFICATION OF SPECIMENS
Among the many valuable uses of the artificial intelligence in the field of museums, it may assist the classification of out-of-context items. This paper deals with the problem of the identification of dinosaur teeth (a type of fossil that is usually found scattered), which can be tackled by means of multivariate algorithms (such as the principal components, discriminant or cluster analyses) taking as a starting point a series of morphometric values (i.e., distances between specific points of the fossil tooth). A good interpretation requires some comprehension regarding the mathematical algorithms that are used, as well as the specific knowledge in palaeontology that permits appreciating the actual reach of the results. However, based on metric values as the computations are, there must also be some control over their precision and the possibility of checking the old measurements or complete the list of morphometric variables. This is an aspect that may be solved if the three-dimensional models of the teeth are made publicly available.The text describes the 3D documentation of a set of twelve fossil teeth of the museum of Natural Sciences of Álava (Vitoria-Gasteiz, Spain) —approximately from 1 to 6 cm in size— using a structured light scanner and close-up photographs for recording some features smaller than the resolution of the scanner. The information about each tooth was then packed and uploaded to the university repository, from where it is also accessible via cultural and scientific aggregators (such as Europeana); likewise, reduced resolution copies are also accessible in the commercial platform Sketchfab®.</p
Surviving sepsis campaign guidelines for severe sepsis and septic shock: implementation and outcome of a 3-year follow up
Compliance with sepsis resuscitation but not management bundles improves the survival of surgical patients with septic shock
Setting competitiveness indicators using BSC and ANP
[EN] In this paper a new approach to assess companies' competitiveness performance in an efficient and reliable way is presented. It introduces a rigorous methodology, based on multi-criteria techniques, which seeks to assist managers of companies within a specific industrial sector in providing information about their relative position in order to define improvement action plans. The approach combines the use of the analytic network process (ANP) method with the balanced scorecard (BSC) to achieve competitiveness indicators. The ANP method allows the aggregation of experts judgments on each of the selected indicators used into one company competitiveness index (CCI). To demonstrate the goodness of the methodology, a case study of the plastic sector of Venezuela has been carried out. Three companies have been analysed using the CCI proposed. The participating experts agreed that the methodology is useful and an improvement from current competitiveness measurement techniques. They found the results obtained coherent and the use of resources significantly less than in other methods.Poveda Bautista, R.; Baptista, DC.; García Melón, M. (2012). Setting competitiveness indicators using BSC and ANP. International Journal of Production Research. 50(17):4738-4752. doi:10.1080/00207543.2012.657964S47384752501
Critical review of technologies for the on-site treatment of hospital wastewater: From conventional to combined advanced processes
This review aims to assess different technologies for the on-site treatment of hospital wastewater (HWW) to remove pharmaceutical compounds (PhCs) as sustances of emerging concern at a bench, pilot, and full scales from 2014 to 2020. Moreover, a rough characterisation of hospital effluents is presented. The main detected PhCs are antibiotics and psychiatric drugs, with concentrations up to 1.1 mg/L. On the one hand, regarding the presented technologies, membrane bioreactors (MBRs) are a good alternative for treating HWW with PhCs removal values higher than 80% in removing analgesics, anti-inflammatories, cardiovascular drugs, and some antibiotics. Moreover, this system has been scaled up to the pilot plant scale. However, some target compounds are still present in the treated effluent, such as psychiatric and contrast media drugs and recalcitrant antibiotics (erythromycin and sulfamethoxazole). On the other hand, ozonation effectively removes antibiotics found in the HWW (>93%), and some studies are carried out at the pilot plant scale. Even though, some families, such as the X-ray contrast media, are recalcitrant to ozone. Other advanced oxidation processes (AOPs), such as Fenton-like or UV treatments, seem very effective for removing pharmaceuticals, Antibiotic Resistance Bacteria (ARBs) and Antibiotic Resistance Genes (ARGs). However, they are not implanted at pilot plant or full scale as they usually consider extra reactants such as ozone, iron, or UV-light, making the scale-up of the processes a challenging task to treat high-loading wastewater. Thus, several examples of biological wastewater treatment methods combined with AOPs have been proposed as the better strategy to treat HWW with high removal of PhCs (generally over 98%) and ARGs/ARBs (below the detection limit) and lower spending on reactants. However, it still requires further development and optimisation of the integrated processes.Comunidad de Madri
Critical review of technologies for the on-site treatment of hospital wastewater: From conventional to combined advanced processes
In this work, a raw and low cost mineral, ilmenite (FeTiO3), has been tested for the first time as a photocatalyst paired with peroxymonosulfate (HSO5-; PMS) for the inactivation of Enterococcus faecalis as an alternative to conventional treatments to disinfect wastewater for reuse. The influence of some operational parameters such as reagent dosage, catalyst concentration, initial pH, or flow rate was also studied and optimized. After several tests, the scarce pure photoactivity under UV-A was remarked by ilmenite because of its high iron content, which favors photogenerated charge recombination. However, ilmenite activity was highly promoted when combined with low concentrations of PMS and UV-A light, reaching total inactivation of Enterococcus faecalis in 120 min. Quenching tests were performed using methanol, tert-butyl alcohol, furfuryl alcohol, and Cu(II) to assess the main reactive species involved in the disinfection process determining the critical role of both HO·and SO4·- radicals in the process. Finally, the influence of the water matrix was also evaluated by studying the effect of water hardness and the presence of nutrients on the system. Overall, the PMS/Ilmenite/UV-A system yielded promising results with a total removal of Enterococcus faecalis in 120 min. However, it also showed the need for further study and understanding of the disinfection mechanism to achieve the same level of performance in real wastewaterThe "Comunidad de Madrid" supported this research through REMTAVARES S2013/MAE-2716 and S2018/EMT-434
The origin and collapse of rock glaciers during the Bølling-Allerød interstadial: A new study case from the Cantabrian Mountains (Spain)
.During the Late Pleistocene, the main mountain ranges of the Iberian Peninsula were covered by small icefields and cirque and alpine glaciers. The deglaciation triggered paraglacial processes that generated landforms, mostly within the ice-free glacial cirques. In this research we analyse the deglaciation process in the Muxivén Cirque (42°15′N – 6°16′W), in the upper Sil River Basin, which includes some of the largest relict rock glaciers of the Cantabrian Mountains. We addressed this objective by means of accurate geomorphological reconstructions, sedimentological analysis, Schmidt-hammer surface weathering measurements and a dataset of 10 10Be Cosmic-Ray Exposure ages. Results reveal that after ~16 ka, glaciers retreated to the bottom of the cirques at the headwaters of the valley, leaving the walls free of ice and triggering rock avalanches onto the remnants of these glaciers. This paraglacial process supplied debris to a small glacier within Muxivén Cirque, which transformed in two rock glaciers. These debris isolated the ice inside the rock glaciers only for a very short period of time and ended up melting completely before the Younger Dryas. The lower sector of the largest one stabilized at 14.5 ± 1.5 ka, while the upper sector remained active until 13.5 ± 0.8 ka. Previous to the stabilization of the lower sector of the northern rock glacier, at its margin a high-energy debris avalanche occurred at ~14.0 ± 0.9 ka. These data agree with previous research, corroborating the paraglacial origin of most Iberian rock glaciers during the Bølling-Allerød interstadial.S
The origin and collapse of rock glaciers during the Bølling-Allerød interstadial: A new study case from the Cantabrian Mountains (Spain)
© 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).During the Late Pleistocene, the main mountain ranges of the Iberian Peninsula were covered by small icefields and cirque and alpine glaciers. The deglaciation triggered paraglacial processes that generated landforms, mostly within the ice-free glacial cirques. In this research we analyse the deglaciation process in the Muxivén Cirque (42°15′N – 6°16′W), in the upper Sil River Basin, which includes some of the largest relict rock glaciers of the Cantabrian Mountains. We addressed this objective by means of accurate geomorphological reconstructions, sedimentological analysis, Schmidt-hammer surface weathering measurements and a dataset of 10 10Be Cosmic-Ray Exposure ages. Results reveal that after ~16 ka, glaciers retreated to the bottom of the cirques at the headwaters of the valley, leaving the walls free of ice and triggering rock avalanches onto the remnants of these glaciers. This paraglacial process supplied debris to a small glacier within Muxivén Cirque, which transformed in two rock glaciers. These debris isolated the ice inside the rock glaciers only for a very short period of time and ended up melting completely before the Younger Dryas. The lower sector of the largest one stabilized at 14.5 ± 1.5 ka, while the upper sector remained active until 13.5 ± 0.8 ka. Previous to the stabilization of the lower sector of the northern rock glacier, at its margin a high-energy debris avalanche occurred at ~14.0 ± 0.9 ka. These data agree with previous research, corroborating the paraglacial origin of most Iberian rock glaciers during the Bølling-Allerød interstadial.This research was supported by the project LE080G19 (Paleo-environmental significance and relationship with the global change of the Cantabrian Mountains rock glaciers: relative age dating and analysis of the internal structure using electrical tomography), founded by the Junta de Castilla y León and PR108/20-20 (Santander Bank-UCM Projects). José M. Fernández-Fernández is supported by a postdoctoral grant within the NUNANTAR project, funded by the Fundação para a Ciência e Tecnologia of Portugal (PTDC/CTA-GFI/32002/2017). Marc Oliva is supported by the Ramón y Cajal Program (RYC-2015-17597) and by the Research Group ANTALP (Antarctic, Arctic, Alpine Environments; 2017-SGR-1102) funded by the Government of Catalonia. Adrián Melón-Nava was supported by the FPU program from the Spanish Ministerio de Universidades (FPU20/01220).Peer reviewe
Overview of recent TJ-II stellarator results
The main results obtained in the TJ-II stellarator in the last two years are reported. The most important topics investigated have been modelling and validation of impurity transport, validation of gyrokinetic simulations, turbulence characterisation, effect of magnetic configuration on transport, fuelling with pellet injection, fast particles and liquid metal plasma facing components. As regards impurity transport research, a number of working lines exploring several recently discovered effects have been developed: the effect of tangential drifts on stellarator neoclassical transport, the impurity flux driven by electric fields tangent to magnetic surfaces and attempts of experimental validation with Doppler reflectometry of the variation of the radial electric field on the flux surface. Concerning gyrokinetic simulations, two validation activities have been performed, the comparison with measurements of zonal flow relaxation in pellet-induced fast transients and the comparison with experimental poloidal variation of fluctuations amplitude. The impact of radial electric fields on turbulence spreading in the edge and scrape-off layer has been also experimentally characterized using a 2D Langmuir probe array. Another remarkable piece of work has been the investigation of the radial propagation of small temperature perturbations using transfer entropy. Research on the physics and modelling of plasma core fuelling with pellet and tracer-encapsulated solid-pellet injection has produced also relevant results. Neutral beam injection driven Alfvénic activity and its possible control by electron cyclotron current drive has been examined as well in TJ-II. Finally, recent results on alternative plasma facing components based on liquid metals are also presented. ISSN:0029-5515 ISSN:1741-432