Investigating the Filled Gel Model in Cheddar Cheese Through Use of Sephadex Beads

Cheese can be modeled as a filled gel whereby milkfat globules are dispersed in a casein gel network. We determined the filler effects using Sephadex beads (GE Healthcare Life Sciences, Pittsburgh, PA) as a model filler particle. Ideally, such a model could be used to test novel filler particles to replace milkfat in low-fat cheese. Low-filler (6% particles), reduced-filler (16%), and full-filler (33%) cheeses were produced using either Sephadex beads of varying sizes (20 to 150 μm diameter) or milkfat. Small- and large-strain rheological tests were run on each treatment at 8, 12, and 18 wk after cheese manufacturing. Differences in rheological properties were caused primarily by the main effects of filler volume and type (milkfat vs. Sephadex), whereas filler size had no obvious effect. All treatments showed a decrease in deformability and an increase in firmness as filler volume increased above 25%, although the beads exhibited a greater reinforcing effect and greater energy recovery than milkfat

Strain Hardening and Anisotropy During Tensile Testing of Sheared Model Mozzarella Cheeses

We studied the tensile fracture properties of model Mozzarella cheeses with varying amounts of shear work input (3.3–73.7 kJ/kg). After manufacture, cheeses were elongated by manual rolling at 65°C followed by tensile testing at 21°C on dumbbell-shaped samples cut both parallel and perpendicular to the rolling direction. Strain hardening parameters were estimated from stress–strain curves using 3 different methods. Fracture stress and strain for longitudinal samples did not vary significantly with shear work input up to 26.3 kJ/kg and then decreased dramatically at 58.2 kJ/kg. Longitudinal samples with shear work input \u3c30 kJ/kg demonstrated significant strain hardening by all 3 estimation methods. At shear work inputs \u3c30 kJ/kg, strong anisotropy was observed in both fracture stress and strain. After a shear work input of 58.2 kJ/kg, anisotropy and strain hardening were absent. Perpendicular samples did not show strain hardening at any level of shear work input. Although the distortion of the fat drops in the cheese structure associated with the elongation could account for some of the anisotropy observed, the presence of anisotropy in the elongated nonfat samples reflected that shear work and rolling also aligned the protein structure

A possible rheological model of gum candies

An appropriate rheological model can be used in production of good quality gum candy required by consumers. For this purpose Creep-Recovery Test (CRT) curves were recorded with a Stable Micro System TA.XT-2 precision texture analyser with 75 mm diameter cylinder probe on gum candies purchased from the local market. The deformation speed was 0.2 mm s−1, the creeping- and recovering time was 60 s, while the loading force was set to 1 N, 2 N, 5 N, 7 N, and 10 N. The two-element Kelvin-Voigt-model, a three-element model, and the four-element Burgers-model were fitted on the recorded creep data, and then the parameters of the models were evaluated. The best fitting from the used models was given by the Burgers model

Effect of egg white protein-pectin electrostatic interactions in a high sugar content system on foaming and foam rheological properties

The aim of this study was to evaluate the effect of electrostatic interaction between egg white protein (EW) and pectin in a high sugar content system (80 wt% total solid) on the foaming properties (density, overrun and stability) and foam rheological properties. A central composite rotatable design was carried out to study the effects of biopolymer concentration (1.40-5.60%, w/w) and EW:pectin ratio (7:1-63:1) on the apparent viscosity before whipping, foaming capacity (density and overrun) and foam rheological properties (storage modulus G', loss modulus G" and phase angle δ) of sugar/EW/pectin mixtures at pH 3.0. The apparent viscosity increased as biopolymer concentration increased while EW:pectin ratio had no significant effect (p>0.10) on this response. At 7:1 EW:pectin ratio, the mixture presented low foaming capacity, resulting in foam with less solid character and low stability, possibly due to the pectin excess in the system. At 49:1 EW:pectin ratio, the mixture showed higher foaming capacity and foam elasticity. The formation of soluble complexes between EW and pectin possibly increased the continuous phase viscosity and enhanced the foam stability by slowing liquid drainage

Effects of grain source and processing methods on the nutritional profile and digestibility of grain amaranth

Amaranth grain is reputed to have a high nutritional value, and as a plant, be tolerant to adverse weather conditions. This suggests that grain amaranth could be useful in tackling malnutrition and the growing burden of cardiometabolic diseases. However, there is insufficient knowledge at present about how the nutrient composition and digestibility of amaranth grain varies with growing environment, crop genotype, and post-harvest processing. We investigated the effect of the source and processing of amaranth grains on the digestibility of protein and lipid present in the grains. There was variation in the composition and digestibility of raw grains from different sources, indicating a role of genotype and/or growing environment which warrants further investigation. The greatest differences in digestibility were measured between the different processing techniques. This indicates that efforts to increase the cultivation and consumption of grain amaranth need to be supported by education about effective processing and preparation techniques

Computational shelf-life dating : complex systems approaches to food quality and safety

Shelf-life is defined as the time that a product is acceptable and meets the consumers expectations regarding food quality. It is the result of the conjunction of all services in production, distribution, and consumption. Shelf-life dating is one of the most difficult tasks in food engineering. Market pressure has lead to the implementation of shelf-life by sensory analyses, which may not reflect the full quality spectra. Moreover, traditional methods for shelf-life dating and small-scale distribution chain tests cannot reproduce in a laboratory the real conditions of storage, distribution, and consumption on food quality. Today, food engineers are facing the challenges to monitor, diagnose, and control the quality and safety of food products. The advent of nanotechnology, multivariate sensors, information systems, and complex systems will revolutionize the way we manage, distribute, and consume foods. The informed consumer demands foods, under the legal standards, at low cost, high standards of nutritional, sensory, and health benefits. To accommodate the new paradigms, we herein present a critical review of shelf-life dating approaches with special emphasis in computational systems and future trends on complex systems methodologies applied to the prediction of food quality and safety.Fundo Europeu de Desenvolvimento Regional (FEDER) - Programa POS-ConhecimentoFundação para a Ciência e a Tecnologia (FCT) - SFRH/BPD/26133/2005, SFRH/ BPD/20735/200

Effect of high power ultrasonic treatment on whey protein foaming quality

High power ultrasonic energy at 20%, 40% and 60% amplitude was applied on whey protein suspension at concentrations of 100, 150 and 200 g kg−1 for 5, 15 and 25 min to improve its foaming quality. Ultrasound-treated whey protein suspension at 200 g kg−1 showed improvement in terms of increased foaming capacity by 18%, foam stability by 35%, consistency index by 18%, storage modulus by 17%, loss modulus by 26% and viscosity by 21% compared with untreated whey protein. For maximally ultrasound-treated samples of 60% amplitude treated for 25 min, the improved whey protein foams also had a 46% increase in the number of more evenly distributed fine bubbles which had a size smaller than 0.0025 mm3 as imaged using X-ray microtomography

Sterilization of hydrogen peroxide resistant bacterial spores with stabilized chlorine dioxide

Bacillus pumilus SAFR-032 spores isolated from a clean room environment are known to exhibit enhanced resistance to peroxide, desiccation, UV radiation and chemical disinfection than other spore-forming bacteria. The survival of B. pumilus SAFR-032 spores to standard clean room sterilization practices requires development of more stringent disinfection agents. Here, we report the effects of a stabilized chlorine dioxide-based biocidal agent against spores of B. pumilus SAFR-032 and Bacillus subtilis ATCC 6051. Viability was determined via CFU measurement after exposure. Chlorine dioxide demonstrated efficacy towards sterilization of spores of B. pumilus SAFR-032 equivalent or better than exposure to hydrogen peroxide. These results indicate efficacy of chlorine dioxide delivered through a stabilized chlorine dioxide product as a means of sterilization of peroxide- and UV-resistant spores.This work is supported by the National Institutes of Health (1R01GM090064-01), a NASA EPSCoR Research Infrastructure Development (RID) grant NN07AL49A, and the University of Oklahoma.Ye