265 research outputs found
Protein pattern transfer for biosensor applications
This paper presents a very simple, industrially scalable method for transferring a high-resolution, biologically active protein pattern from one substrate to another. We demonstrate the transfer of a protein pattern formed initially by microcontact printing from a silicon surface (to which this form of printing is applicable) onto a glass or polymer substrate, almost independently of the surface/bulk properties of the second substrate. A very thin, spin-coated layer of a sugar is used to preserve the structure and organization of proteins during the subsequent plasma deposition of a siloxane polymer, after which the protein pattern could simply be peeled off the silicon substrate and glued onto any other desired substrate. © 2009 Elsevier B.V. All rights reserved
Macroscopic transport by synthetic molecular machines
Nature uses molecular motors and machines in virtually every significant biological process, but demonstrating that simpler artificial structures operating through the same gross mechanisms can be interfaced with—and perform physical tasks in—the macroscopic world represents a significant hurdle for molecular nanotechnology. Here we describe a wholly synthetic molecular system that converts an external energy source (light) into biased brownian motion to transport a macroscopic cargo and do measurable work. The millimetre-scale directional transport of a liquid on a surface is achieved by using the biased brownian motion of stimuli-responsive rotaxanes (‘molecular shuttles’) to expose or conceal fluoroalkane residues and thereby modify surface tension. The collective operation of a monolayer of the molecular shuttles is sufficient to power the movement of a microlitre droplet of diiodomethane up a twelve-degree incline.
MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented
The Borexino detector at the Laboratori Nazionali del Gran Sasso
Borexino, a large volume detector for low energy neutrino spectroscopy, is
currently running underground at the Laboratori Nazionali del Gran Sasso,
Italy. The main goal of the experiment is the real-time measurement of sub MeV
solar neutrinos, and particularly of the mono energetic (862 keV) Be7 electron
capture neutrinos, via neutrino-electron scattering in an ultra-pure liquid
scintillator. This paper is mostly devoted to the description of the detector
structure, the photomultipliers, the electronics, and the trigger and
calibration systems. The real performance of the detector, which always meets,
and sometimes exceeds, design expectations, is also shown. Some important
aspects of the Borexino project, i.e. the fluid handling plants, the
purification techniques and the filling procedures, are not covered in this
paper and are, or will be, published elsewhere (see Introduction and
Bibliography).Comment: 37 pages, 43 figures, to be submitted to NI
New results on solar neutrino fluxes from 192 days of Borexino data
We report the direct measurement of the ^7Be solar neutrino signal rate
performed with the Borexino detector at the Laboratori Nazionali del Gran
Sasso. The interaction rate of the 0.862 MeV ^7Be neutrinos is
49+-3(stat)+-4(syst) counts/(day * 100ton). The hypothesis of no oscillation
for ^7Be solar neutrinos is inconsistent with our measurement at the 4sigma
level. Our result is the first direct measurement of the survival probability
for solar nu_e in the transition region between matter-enhanced and
vacuum-driven oscillations. The measurement improves the experimental
determination of the flux of ^7Be, pp, and CNO solar nu_e, and the limit on the
magnetic moment of neutrinos
New limits on nucleon decays into invisible channels with the BOREXINO Counting Test Facility
The results of background measurements with the second version of the
BOREXINO Counting Test Facility (CTF-II), installed in the Gran Sasso
Underground Laboratory, were used to obtain limits on the instability of
nucleons, bounded in nuclei, for decays into invisible channels ():
disappearance, decays to neutrinos, etc. The approach consisted of a search for
decays of unstable nuclides resulting from and decays of parents
C, C and O nuclei in the liquid scintillator and the water
shield of the CTF. Due to the extremely low background and the large mass (4.2
ton) of the CTF detector, the most stringent (or competitive) up-to-date
experimental bounds have been established: y, y, y and y, all at 90% C.L.Comment: 22 pages, 3 figures,submitted to Phys.Lett.
MICE: The muon ionization cooling experiment. Step I: First measurement of emittance with particle physics detectors
Copyright @ 2011 APSThe Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.This work was supported by NSF grant PHY-0842798
Estudos paleoambientais interdisciplinares: dinâmica da vegetação, do ambiente marinho e inferências climáticas milenares a atuais na Costa Norte do Espírito Santo, Brasil
Estudos paleoambientais desde ~50.000 anos na costa do Brasil e, em particular, no litoral do Espírito Santo, são ainda insuficientes para servir de base a reconstituições da dinâmica da vegetação, de oscilações do nível relativo do mar e de flutuações climáticas e respectivas influências sobre a ação humana milenar. Para obter essas informações, uma equipe interdisciplinar, financiada por projetos temáticos FAPESP e CNPq, desenvolveu pesquisas correlatas na Reserva Natural Vale (RNV) e região. Para a caracterização da dinâmica da vegetação e marinha, com inferências climáticas, em locais de floresta de tabuleiros e campos naturais da RNV e região desde ~16.000 anos, utilizaram-se isótopos do C (12C, 13C e 14C) da matéria orgânica do solo e sedimentar, além de palinologia em sedimentos lacustres e terrestres. No estudo da dinâmica do ecótono floresta – campo, apresentam-se inferências preliminares sobre a evolução pedogenética dos Espodossolos associados ao campo, com ênfase às suas características físico-químicas, e também dos Argissolos, encontrados sob floresta. Finaliza-se com o estágio inicial de uma coleção de referência de fitólitos, bioindicador de vegetação utilizado em estudos paleoambientais, extraídos de plantas da floresta de tabuleiros da RNV.A equipe agradece todo o empenho dos funcionários e apoio logístico da Reserva Natural Vale, Linhares, Espírito Santo; à FAPESP através do projeto Temático 2011/00995-7 (ProjES); e ao CNPq – Universal 2012-5/470210, pelo aporte financeiro e a colaboração dos técnicos do Laboratório 14C, Liz Mary Bueno de Moraes e Thiago Casemiro Barrios de Campos, na preparação de amostras gasosas para a datação 14C.Peer Reviewe
Characterisation of the muon beams for the Muon Ionisation Cooling Experiment
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.2–2.3 π mm-rad horizontally and 0.6–1.0 π mm-rad vertically, a horizontal dispersion of 90–190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE
Preparation and Characterization of Covalently Binding of Rat Anti-human IgG Monolayer on Thiol-Modified Gold Surface
The 16-mercaptohexadecanoic acid (MHA) film and rat anti-human IgG protein monolayer were fabricated on gold substrates using self-assembled monolayer (SAM) method. The surface properties of the bare gold substrate, the MHA film and the protein monolayer were characterized by contact angle measurements, atomic force microscopy (AFM), grazing incidence X-ray diffraction (GIXRD) method and X-ray photoelectron spectroscopy, respectively. The contact angles of the MHA film and the protein monolayer were 18° and 12°, respectively, all being hydrophilic. AFM images show dissimilar topographic nanostructures between different surfaces, and the thickness of the MHA film and the protein monolayer was estimated to be 1.51 and 5.53 nm, respectively. The GIXRD 2θ degrees of the MHA film and the protein monolayer ranged from 0° to 15°, significantly smaller than that of the bare gold surface, but the MHA film and the protein monolayer displayed very different profiles and distributions of their diffraction peaks. Moreover, the spectra of binding energy measured from these different surfaces could be well fitted with either Au4f, S2p or N1s, respectively. Taken together, these results indicate that MHA film and protein monolayer were successfully formed with homogeneous surfaces, and thus demonstrate that the SAM method is a reliable technique for fabricating protein monolayer
- …