311 research outputs found

    Changes in neuropsychological functioning following temporal lobectomy in patients with temporal lobe epilepsy

    Get PDF
    Purpose: This study was conducted to evaluate the changes in neuropsychological functioning in patients with temporal lobe epilepsy (TLE) after temporal lobe resection. Methods: Fifty-four TLE patients were evaluated before and after surgery using comprehensive neuropsychological tests to assess general intelligence, executive functioning, language, verbal and visual memory, working memory, visuo-spatial ability, attention and motor function. Results: The patients with left TLE showed no impairment of neuropsychological functioning after surgery, with the exception of auditory immediate memory. Furthermore, they showed significant improvement in performance IQ, executive function, working memory, visual memory, attention and psychomotor speed. The patients with right TLE did not show any significant impairment in post-operative neuropsychological functioning. They showed improvements in intellectual and executive functions, language, visual memory, visuo-spatial ability, attention and motor function post-operatively. The patients with hippocampal sclerosis showed greater post-operative improvements than the patients without hippocampal sclerosis regardless of the side. Patients with better pre-operative neuropsychological function had a higher chance of successfully discontinuing all seizure medications after surgery. Discussion: The results of this study suggest that temporal lobectomy does not harm the neuropsychological functioning of patients with intractable TLE and that it improves cognitive functions of the contralateral hemisphere. © 2009 W. S. Maney & Son Ltd

    Coherent Phonons in Carbon Nanotubes and Graphene

    Full text link
    We review recent studies of coherent phonons (CPs) corresponding to the radial breathing mode (RBM) and G-mode in single-wall carbon nanotubes (SWCNTs) and graphene. Because of the bandgap-diameter relationship, RBM-CPs cause bandgap oscillations in SWCNTs, modulating interband transitions at terahertz frequencies. Interband resonances enhance CP signals, allowing for chirality determination. Using pulse shaping, one can selectively excite speci!c-chirality SWCNTs within an ensemble. G-mode CPs exhibit temperature-dependent dephasing via interaction with RBM phonons. Our microscopic theory derives a driven oscillator equation with a density-dependent driving term, which correctly predicts CP trends within and between (2n+m) families. We also find that the diameter can initially increase or decrease. Finally, we theoretically study the radial breathing like mode in graphene nanoribbons. For excitation near the absorption edge, the driving term is much larger for zigzag nanoribbons. We also explain how the armchair nanoribbon width changes in response to laser excitation.Comment: 48 pages, 41 figure

    An approach to convert vertex-based 3D representations to combinatorial B-splines for real-time visual collaboration

    Get PDF
    Scientific Visualization and Virtual Reality are increasingly being used for the design of complex systems. These technologies offer powerful capabilities to make decisions that are cost and time effective. The next logical extension is to collaborate with these visual models in real-time, where parts of a design team are geographically separated. Specifically, visual collaboration enables ideas and proposed changes to be discussed exactly on a virtual model of a product. However, high-end visualization hardware and Internet technologies impede widespread use of real-time visual collaboration due to the large amount of data from which these representations are created. These data are typically in the form of 3D vertex-based models, which offer a high degree of realism when displayed, but at a price of storage, rendering speeds and processing efficiency. The more realistic the representation desired, the larger the number of vertices required and hence the higher the file size. In this paper, we propose a new data modeling and handling technique where traditional vertex-based models are converted into combinatorial B-Spline based wire-frame models that allow realtime visual collaboration in the context of typical virtual reality systems. Using appropriate filtering methods, parametric equations are computed for each curved segment in a vertexbased representation and bundled together with sampled linear segments of the model. The computed parametric equation based models occupy only a fraction of the size when compared to the original vertex-based models. These lightweight models can easily be transmitted over the Internet, in real-time, for viewing with a platform independent visual client program. The proposed methods were tested on several example data files to prove the method’s effectiveness

    Sustained safety and performance of the second-generation drug-eluting absorbable metal scaffold in patients with de novo coronary lesions: 12-month clinical results and angiographic findings of the BIOSOLVE-II first-in-man trial.

    Get PDF
    Metal absorbable scaffolds constitute a conceptually attractive alternative to polymeric scaffolds. Promising 6-month outcomes of a second-generation drug-eluting absorbable metal scaffold (DREAMS 2G), consisting of an absorbable magnesium scaffold backbone, have been reported. We assessed the 12-month safety and performance of this novel device. The prospective, international, multi-centre, first-in-man BIOSOLVE-II trial enrolled 123 patients with up to two de novo lesions with a reference diameter between 2.2 and 3.7 mm. All patients were scheduled for angiographic follow-up at 6 months, and-if subjects consented-at 12 months. Dual antiplatelet therapy was recommended for 6 months. Quantitative coronary angiography (QCA) parameters remained stable from 6 to 12 months [paired data of 42 patients: in-segment late lumen loss 0.20 ± 0.21 mm vs. 0.25 ± 0.22 mm, P = 0.117, Δ 0.05 ± 0.21 mm (95% CI: -0.01;0.12); in-scaffold late lumen loss 0.37 ± 0.25 mm vs. 0.39 ± 0.27 mm, P = 0.446, Δ 0.03 ± 0.22 (95% CI: -0.04;0.10), respectively]. Intravascular ultrasound and optical coherence tomography findings corroborated the QCA results. Target lesion failure occurred in four patients (3.4%), consisting of one death of unknown cause, one target-vessel myocardial infarction, and two clinically driven target lesion revascularization. No additional event occurred beyond the 6-month follow-up. During the entire follow-up of 12 months, none of the patients experienced a definite or probable scaffold thrombosis. The novel drug-eluting metal absorbable scaffold DREAMS 2G showed a continuous favourable safety profile up to 12 months and stable angiographic parameters between 6 and 12 months. NCT01960504

    Sustainable nitrogen fixation from synergistic effect of photo-electrochemical water splitting and atmospheric pressure N2 plasma

    Get PDF
    In this study, nitrogen fixation in the electrolyte was achieved by atmospheric pressure non-thermal plasma generated by a sinusoidal power supply (with an applied voltage of 10 kV and frequency of 33 kHz). Ammonia measurements on plasma exposed electrolyte at several working gas and purging gas conditions revealed that nitrogen plasma in the same gas environment is more favourable for plasma-assisted ammonia synthesis. In addition, photo-electrochemical water splitting was performed by irradiating UV light on a titanium dioxide semiconductor photo-anode to generate hydrogen donor in nitrogen reduction reaction. The amount of ammonia synthesized by this synergistic process of photo-electrochemical water splitting and nitrogen plasma is six times higher than that obtained by nitrogen plasma alone. An increase in the co-synthesized NOX concentrations and background contamination at reaction site reduces the ammonia synthesis rate and Faraday efficiency. However, the ammonia production efficiency was increased up to 72% by using a proton-exchange membrane which prevents the diffusion of oxygen evolved from water splitting into the plasma, and by reducing the axial distance between the plasma electrode and reaction site. The sustainable nitrogen fixation process reported herein can be performed at atmospheric pressure conditions without a direct input of hydrogen gas or any catalyst

    Terahertz Radar Cross Section Characterization using Laser Feedback Interferometry with a Quantum Cascade Laser

    Get PDF
    Radar cross section (RCS) measurements of complex, large objects are usually performed on scale models so that the measurement is carried out in a well-controlled environment. This letter explores the feasibility of RCS measurement using a terahertz quantum cascade laser via laser feedback interferometry. Numerical simulations show that the RCS information embedded in the non-linear interferometric signals obtained from simple targets can be retrieved through numerical fitting of the well-known excess phase equation. The method is validated experimentally using a terahertz quantum cascade laser and the results are well matched with those obtained from numerical simulations

    Probabilistic reasoning with a bayesian DNA device based on strand displacement

    Get PDF
    We present a computing model based on the DNA strand displacement technique which performs Bayesian inference. The model will take single stranded DNA as input data, representing the presence or absence of a specific molecular signal (evidence). The program logic encodes the prior probability of a disease and the conditional probability of a signal given the disease playing with a set of different DNA complexes and their ratios. When the input and program molecules interact, they release a different pair of single stranded DNA species whose relative proportion represents the application of Bayes? Law: the conditional probability of the disease given the signal. The models presented in this paper can empower the application of probabilistic reasoning in genetic diagnosis in vitro

    The role of UV photolysis and molecular transport in the generation of reactive species in a tissue model with a cold atmospheric pressure plasma jet

    Get PDF
    Cold atmospheric pressure plasma jets (plasma) operated in ambient air provide a rich source of reactive oxygen and nitrogen species (RONS), which are known to influence biological processes important in disease. In the plasma treatment of diseased tissue such as subcutaneous cancer tumors, plasma RONS need to first traverse an interface between the plasma-skin surface and second be transported to millimeter depths in order to reach deep-seated diseased cells. However, the mechanisms in the plasma generation of RONS within soft tissues are not understood. In this study, we track the plasma jet delivery of RONS into a tissue model target and we delineate two processes: through target delivery of RONS generated (primarily) in the plasma jet and in situ RONS generation by UV photolysis within the target. We demonstrate that UV photolysis promotes the rapid generation of RONS in the tissue model target's surface after which the RONS are transported to millimeter depths via a slower molecular process. Our results imply that the flux of UV photons from plasma jets is important for delivering RONS through seemingly impenetrable barriers such as skin. The findings have implications not only in treatments of living tissues but also in the functionalization of soft hydrated biomaterials such as hydrogels and extracellular matrix derived tissue scaffolds
    corecore