733 research outputs found
Report of the Working Group on `W Mass and QCD' (Phenomenology Workshop on LEP2 Physics, Oxford, April 1997)
The W Mass and QCD Working Group discussed a wide variety of topics relating
to present and future measurements of M(W) at LEP2, including QCD backgrounds
to W+W- production. Particular attention was focused on experimental issues
concerning the direct reconstruction and threshold mass measurements, and on
theoretical and experimental issues concerning the four jet final state. This
report summarises the main conclusions.Comment: 43 pages LaTeX and 15 encapsulated postscript figures. Uses epsfig
and ioplppt macros. Full Proceedings to be published in Journal of Physics
The scattering of muons in low Z materials
This paper presents the measurement of the scattering of 172 MeV/c muons in
assorted materials, including liquid hydrogen, motivated by the need to
understand ionisation cooling for muon acceleration.
Data are compared with predictions from the Geant 4 simulation code and this
simulation is used to deconvolute detector effects. The scattering
distributions obtained are compared with the Moliere theory of multiple
scattering and, in the case of liquid hydrogen, with ELMS. With the exception
of ELMS, none of the models are found to provide a good description of the
data. The results suggest that ionisation cooling will work better than would
be predicted by Geant 4.7.0p01.Comment: pdfeTeX V 3.141592-1.21a-2.2, 30 pages with 22 figure
Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets
The HARP collaboration has presented measurements of the double-differential
pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800
MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin
nuclear targets. In many applications the extrapolation to long targets is
necessary. In this paper the analysis of data taken with long (one interaction
length) solid cylindrical targets made of carbon, tantalum and lead is
presented. The data were taken with the large acceptance HARP detector in the
T9 beam line of the CERN PS. The secondary pions were produced by beams of
protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and
identification of the produced particles were performed using a small-radius
cylindrical time projection chamber (TPC) placed inside a solenoidal magnet.
Incident protons were identified by an elaborate system of beam detectors.
Results are obtained for the double-differential yields per target nucleon d2
sigma / dp dtheta. The measurements are compared with predictions of the MARS
and GEANT4 Monte Carlo simulations.Comment: 43 pages, 20 figure
Forward production of charged pions with incident on nuclear targets measured at the CERN PS
Measurements of the double-differential production cross-section
in the range of momentum 0.5 \GeVc \leq p \le 8.0 \GeVc and angle 0.025 \rad
\leq \theta \le 0.25 \rad in interactions of charged pions on beryllium,
carbon, aluminium, copper, tin, tantalum and lead are presented. These data
represent the first experimental campaign to systematically measure forward
pion hadroproduction. The data were taken with the large acceptance HARP
detector in the T9 beam line of the CERN PS. Incident particles, impinging on a
5% nuclear interaction length target, were identified by an elaborate system of
beam detectors. The tracking and identification of the produced particles was
performed using the forward spectrometer of the HARP detector. Results are
obtained for the double-differential cross-sections mainly at four incident pion beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). The measurements are compared
with the GEANT4 and MARS Monte Carlo simulationComment: to be published on Nuclear Physics
Conceptual design of a nonscaling fixed field alternating gradient accelerator for protons and carbon ions for charged particle therapy
Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.The conceptual design for a nonscaling fixed field alternating gradient accelerator suitable for charged particle therapy (the use of protons and other light ions to treat some forms of cancer) is described.EPSR
Beams for European Neutrino Experiments (BENE): Midterm scientific report
The activities of BENE during 2004 and 2005 are reviewed. Neutrino oscillation experiments at accelerators offer the richest possibilities of precision studies of neutrino mixing and mass differences, with the potential of important discoveries including leptonic CP or T violation. Two main options for a major initiative have been studied: 1) a high-energy Neutrino Factory coupled to a large dense magnetized detector; 2) a lower energy betabeam and conventional superbeam, coupled to a very large low-density, non-magnetic, detector. Both offer signi cant scienti c breakthroughs over other planned facilities. Much remains to be done to optimize and establish the cost, performance, and feasibility of either solution so as to allow comparison and decision. The proposal of a FP7 Design Study of a Neutrino Facility to be completed by the end of the decade is being prepared. Its success will require strong support and engagement at CERN and other European laboratories and funding agencies. International contributors are already engaged in the framework of an international scoping study. The recommendations and milestones proposed by BENE towards a complete conceptual design are summarized
Absolute Momentum Calibration of the HARP TPC
In the HARP experiment the large-angle spectrometer is using a cylindrical
TPC as main tracking and particle identification detector. The momentum scale
of reconstructed tracks in the TPC is the most important systematic error for
the majority of kinematic bins used for the HARP measurements of the
double-differential production cross-section of charged pions in proton
interactions on nuclear targets at large angle. The HARP TPC operated with a
number of hardware shortfalls and operational mistakes. Thus it was important
to control and characterize its momentum calibration. While it was not possible
to enter a direct particle beam into the sensitive volume of the TPC to
calibrate the detector, a set of physical processes and detector properties
were exploited to achieve a precise calibration of the apparatus. In the
following we recall the main issues concerning the momentum measurement in the
HARP TPC, and describe the cross-checks made to validate the momentum scale. As
a conclusion, this analysis demonstrates that the measurement of momentum is
correct within the published precision of 3%.Comment: To be published by JINS
Measurement of the production of charged pions by protons on a tantalum target
A measurement of the double-differential cross-section for the production of
charged pions in proton--tantalum collisions emitted at large angles from the
incoming beam direction is presented. The data were taken in 2002 with the HARP
detector in the T9 beam line of the CERN PS. The pions were produced by proton
beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a tantalum target
with a thickness of 5% of a nuclear interaction length. The angular and
momentum range covered by the experiment (100 \MeVc \le p < 800 \MeVc and
0.35 \rad \le \theta <2.15 \rad) is of particular importance for the design
of a neutrino factory. The produced particles were detected using a
small-radius cylindrical time projection chamber (TPC) placed in a solenoidal
magnet. Track recognition, momentum determination and particle identification
were all performed based on the measurements made with the TPC. An elaborate
system of detectors in the beam line ensured the identification of the incident
particles. Results are shown for the double-differential cross-sections
at four incident
proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). In addition, the
pion yields within the acceptance of typical neutrino factory designs are shown
as a function of beam momentum. The measurement of these yields within a single
experiment eliminates most systematic errors in the comparison between rates at
different beam momenta and between positive and negative pion production.Comment: 49 pages, 31 figures. Version accepted for publication on Eur. Phys.
J.
Large-angle production of charged pions by 3 GeV/c - 12 GeV/c protons on carbon, copper and tin targets
A measurement of the double-differential production cross-section
in proton--carbon, proton--copper and proton--tin collisions in the range of
pion momentum 100 \MeVc \leq p < 800 \MeVc and angle 0.35 \rad \le \theta
<2.15 \rad is presented. The data were taken with the HARP detector in the T9
beam line of the CERN PS. The pions were produced by proton beams in a momentum
range from 3 \GeVc to 12 \GeVc hitting a target with a thickness of 5% of a
nuclear interaction length. The tracking and identification of the produced
particles was done using a small-radius cylindrical time projection chamber
(TPC) placed in a solenoidal magnet. An elaborate system of detectors in the
beam line ensured the identification of the incident particles. Results are
shown for the double-differential cross-sections at four incident proton beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc)
Large-angle production of charged pions by 3 GeV/c - 12.9 GeV/c protons on beryllium, aluminium and lead targets
Measurements of the double-differential production cross-section
in the range of momentum 100 \MeVc \leq p < 800 \MeVc and angle 0.35 \rad
\leq \theta < 2.15 \rad in proton--beryllium, proton--aluminium and
proton--lead collisions are presented. The data were taken with the HARP
detector in the T9 beam line of the CERN PS. The pions were produced by proton
beams in a momentum range from 3 \GeVc to 12.9 \GeVc hitting a target with a
thickness of 5% of a nuclear interaction length. The tracking and
identification of the produced particles was performed using a small-radius
cylindrical time projection chamber (TPC) placed inside a solenoidal magnet.
Incident particles were identified by an elaborate system of beam detectors.
Results are obtained for the double-differential cross-sections at six incident
proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc, 8.9 \GeVc (Be only), 12 \GeVc
and 12.9 \GeVc (Al only)) and compared to previously available data
- …