Training experts in inclusive practices for an equity on access to culture in Europe

Access to cultural content should be offered by several services available by default. If access services are thought, and budgeted, in the production phase, they are better integrated, and cultural content can be enjoyed by all patrons. How to integrate access services in the production of any cultural good relays on education. Until accessibility enters the syllabus in primary and secondary education curricula, and also in higher education, much work needs to be done. Until such a time when accessibility is normalized as a must-carry requirement, the work of experts in media accessibility will be needed to add accessibility in postproduction stages. The main focus of the chapter is training in postproduction accessibility. The enterprise is looked from many angles, but in all cases putting the end user at the center to understand their needs and expectations. To illustrate our approach to the subject, three European projects funded under the Erasmus + scheme will be used as examples: ACT (Accessible Culture and Training), ADLAB PRO (field of audio description), and ILSA (Interlingual Live Subtitling for Access

Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content

[EN] Laser metal deposition (LMD) and laser cladding (LC) are alternative methods to thermal spraying processes to produce dense, high-quality coatings. In this work, two MCrAlY coatings (M=Ni+Co) have been prepared onto stainless steel substrate using a coaxial LC technique under two different Ni/Co and Al proportions. The mechanical properties were then evaluated with microhardness, nanoindentation, and three-point bending tests. The microstructure and composition of coatings were characterized by X-ray Diffraction (XRD) analysis and Field Emission Electron Microscopy (FESEM) coupled to an Energy Dispersive Spectroscopy (EDS) detector. The study revealed that the ¿/ß phases formed in the MCrAlY coating microstructure result in a lower elastic modulus than the austenitic stainless steel substrate, while an inverse behavior for hardness was observed due the presence of the aluminum-rich ß-phase. Under flexural loads, the failure of coatings showed plasticity and anisotropy characteristics depending on the two laser tracks orientations evaluated.The authors would like to acknowledge the financial support of the Ministry of Science and Innovation of the Government of Spain through research project MAT2011-28492-C03, and the support of the Generalitat Valenciana through ACOMP/2013/114Pereira, JC.; Zambrano, JC.; Rayón, E.; Yañez, A.; Amigó, V. (2018). Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content. Surface and Coatings Technology. 338:22-31. https://doi.org/10.1016/j.surfcoat.2018.01.073S223133

Study protocol of effectiveness of a biopsychosocial multidisciplinary intervention in the evolution of non-speficic sub-acute low back pain in the working population : cluster randomised trial

Background: Non-specific low back pain is a common cause for consultation with the general practitioner, generating increased health and social costs. This study will analyse the effectiveness of a multidisciplinary intervention to reduce disability, severity of pain, anxiety and depression, to improve quality of life and to reduce the incidence of chronic low back pain in the working population with non-specific low back pain, compared to usual clinical care. Methods/Design: A Cluster randomised clinical trial will be conducted in 38 Primary Health Care Centres located in Barcelona, Spain and its surrounding areas. The centres are randomly allocated to the multidisciplinary intervention or to usual clinical care. Patients between 18 and 65 years old (n = 932; 466 per arm) and with a diagnostic of a non-specific sub-acute low back pain are included. Patients in the intervention group are receiving the recommendations of clinical practice guidelines, in addition to a biopsychosocial multidisciplinary intervention consisting of group educational sessions lasting a total of 10 hours. The main outcome is change in the score in the Roland Morris disability questionnaire at three months after onset of pain. Other outcomes are severity of pain, quality of life, duration of current non-specific low back pain episode, work sick leave and duration, Fear Avoidance Beliefs and Goldberg Questionnaires. Outcomes will be assessed at baseline, 3, 6 and 12 months. Analysis will be by intention to treat. The intervention effect will be assessed through the standard error of measurement and the effect-size. Responsiveness of each scale will be evaluated by standardised response mean and receiver-operating characteristic method. Recovery according to the patient will be used as an external criterion. A multilevel regression will be performed on repeated measures. The time until the current episode of low back pain takes to subside will be analysed by Cox regression. Discussion: We hope to provide evidence of the effectiveness of the proposed biopsychosocial multidisciplinary intervention in avoiding the chronification of low back pain, and to reduce the duration of non-specific low back pain episodes. If the intervention is effective, it could be applied to Primary Health Care Centres

Gendering the careers of young professionals: some early findings from a longitudinal study. in Organizing/theorizing: developments in organization theory and practice

Wonders whether companies actually have employees best interests at heart across physical, mental and spiritual spheres. Posits that most organizations ignore their workforce – not even, in many cases, describing workers as assets! Describes many studies to back up this claim in theis work based on the 2002 Employment Research Unit Annual Conference, in Cardiff, Wales

J-PLUS: The javalambre photometric local universe survey

ABSTRACT: TheJavalambrePhotometric Local UniverseSurvey (J-PLUS )isanongoing 12-band photometricopticalsurvey, observingthousands of squaredegrees of theNorthernHemispherefromthededicated JAST/T80 telescope at the Observatorio Astrofísico de Javalambre (OAJ). The T80Cam is a camera with a field of view of 2 deg2 mountedon a telescopewith a diameter of 83 cm, and isequippedwith a uniquesystem of filtersspanningtheentireopticalrange (3500–10 000 Å). Thisfiltersystemis a combination of broad-, medium-, and narrow-band filters, optimallydesigned to extracttherest-framespectralfeatures (the 3700–4000 Å Balmer break region, Hδ, Ca H+K, the G band, and the Mg b and Ca triplets) that are key to characterizingstellartypes and delivering a low-resolutionphotospectrumforeach pixel of theobservedsky. With a typicaldepth of AB ∼21.25 mag per band, thisfilter set thusallowsforanunbiased and accuratecharacterization of thestellarpopulation in our Galaxy, itprovidesanunprecedented 2D photospectralinformationforall resolved galaxies in the local Universe, as well as accuratephoto-z estimates (at the δ z/(1 + z)∼0.005–0.03 precisionlevel) formoderatelybright (up to r ∼ 20 mag) extragalacticsources. Whilesomenarrow-band filters are designedforthestudy of particular emissionfeatures ([O II]/λ3727, Hα/λ6563) up to z < 0.017, theyalsoprovidewell-definedwindowsfortheanalysis of otheremissionlines at higherredshifts. As a result, J-PLUS has thepotential to contribute to a widerange of fields in Astrophysics, both in thenearbyUniverse (MilkyWaystructure, globular clusters, 2D IFU-likestudies, stellarpopulations of nearby and moderate-redshiftgalaxies, clusters of galaxies) and at highredshifts (emission-line galaxies at z ≈ 0.77, 2.2, and 4.4, quasi-stellarobjects, etc.). Withthispaper, wereleasethefirst∼1000 deg2 of J-PLUS data, containingabout 4.3 millionstars and 3.0 milliongalaxies at r <  21mag. With a goal of 8500 deg2 forthe total J-PLUS footprint, thesenumbers are expected to rise to about 35 millionstars and 24 milliongalaxiesbytheend of thesurvey.Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel, the Spanish Ministry of Economy and Competitiveness (MINECO; under grants AYA2017-86274-P, AYA2016-77846-P, AYA2016-77237-C3-1-P, AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2012-30789, AGAUR grant SGR-661/2017, and ICTS-2009-14), and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685

J-PLUS: The Javalambre Photometric Local Universe Survey

The Javalambre Photometric Local Universe Survey (J-PLUS) is an ongoing 12-band photometric optical survey, observing thousands of square degrees of the Northern Hemisphere from the dedicated JAST/T80 telescope at the Observatorio Astrofisico de Javalambre (OAJ). The T80Cam is a camera with a field of view of 2 deg(2) mounted on a telescope with a diameter of 83 cm, and is equipped with a unique system of filters spanning the entire optical range (3500-10 000 angstrom). This filter system is a combination of broad-, medium-, and narrow-band filters, optimally designed to extract the rest-frame spectral features (the 3700-4000 angstrom Balmer break region, H delta, Ca H+K, the G band, and the Mg b and Ca triplets) that are key to characterizing stellar types and delivering a low-resolution photospectrum for each pixel of the observed sky. With a typical depth of AB similar to 21.25 mag per band, this filter set thus allows for an unbiased and accurate characterization of the stellar population in our Galaxy, it provides an unprecedented 2D photospectral information for all resolved galaxies in the local Universe, as well as accurate photo-z estimates (at the delta z/(1 + z) similar to 0.005-0.03 precision level) for moderately bright (up to r similar to 20 mag) extragalactic sources. While some narrow-band filters are designed for the study of particular emission features ([O II]/lambda 3727, H alpha/lambda 6563) up to z < 0.017, they also provide well-defined windows for the analysis of other emission lines at higher redshifts. As a result, J-PLUS has the potential to contribute to a wide range of fields in Astrophysics, both in the nearby Universe (Milky Way structure, globular clusters, 2D IFU-like studies, stellar populations of nearby and moderate-redshift galaxies, clusters of galaxies) and at high redshifts (emission-line galaxies at z approximate to 0.77, 2.2, and 4.4, quasi-stellar objects, etc.). With this paper, we release the first similar to 1000 deg(2) of J-PLUS data, containing about 4.3 million stars and 3.0 million galaxies at r < 21 mag. With a goal of 8500 deg(2) for the total J-PLUS footprint, these numbers are expected to rise to about 35 million stars and 24 million galaxies by the end of the survey

Synthesis and particle size control of Cd Se nanoparticles by soft chemical methods

The development of third generation solar cells requires the preparation of nanoparticulated material to increase the efficiency of carrier generation. However there are still fundamental research challenges, such as control of particle size, size distribution and controlled particle agglomeration and the electrical interaction between the nanoparticles. In this work CdSe nanoparticles were prepared from aqueous precursors by a soft method as controlled precipitation in gelatin a) and glycerin solutions b). Films were obtained introducing a glass slide in the liquid gelatin and glycerin colloidal preparations. The morphology of gelatin-prepared films was studied by atomic force microscopy. Nanoparticles 20 nm to 100 nm under the gelatin layer were obtained. The structure of nanoparticles in gelatin bulk was studied by x-ray diffraction compared with gelatin alone and CdSe prepared without gelatin. UV-Vis absorbance was compared during CdSe formation and on the deposited films. Gelatin- stabilized CdSe films show a more pronounced blue-shifted absorbance than that of glycerin ones, suggesting a better control in particle growth

Composition and morphology of metal-containing diamond-like carbon films obtained by reactive magnetron sputtering

6 pages, 5 figures.-- Printed version published Jun 22, 2005.-- Issue title: "EMRS 2004, Symposium J" (Strasbourg, May 24-28, 2004).The addition of metal atoms within the matrix of diamond-like carbon films leads to the improvement of their mechanical properties. The present paper discusses the relationship between the composition and morphology of metal-containing (W, Nb, Mo, Ti) diamond-like carbon thin films deposited at room temperature by reactive magnetron sputtering from a metal target in an argon and methane atmosphere. Composition was measured either by electron microprobe technique or by X-ray photoelectron spectroscopy and shows a smooth variation with relative methane flow. High relative methane flows lead to a bulk saturation of carbon atoms, which leads to a lack of homogeneity in the films as confirmed by secondary ion mass spectrometry. Cross-section micrographs were observed by transmission electron microscopy and revealed a structure strongly influenced by the metal inserted and its abundance. The surface pattern obtained by scanning electrochemical potential microscopy provided the metallicity distribution. These measurements were completed with atomic force microscopy of the surface. Selected area electron diffraction and X-ray diffraction measurements provided data of the crystalline structure along with nano-crystallite size. High-resolution transmission electron microscopy provided images of these crystallites.This study was partially supported by the Generalitat de Catalunya (SGR 00078) and the CICYT of Spain (projects MAT 2002-04263-C04 and MAT 2003-02997).Peer reviewe

Molecular Friction as a Tool to Identify Functionalized Alkanethiols

Contains fulltext : 83838.pdf (publisher's version ) (Open Access)10 p