Airway dimensions and pathologies of trumpet players vs. non-trumpet players.

Objective: The objective of this retrospective, 3-dimensional cone beam computed tomography study was to determine if there is a significant difference between the most constricted area of the airway, the prevertebral soft tissue thickness and airway dimensions (length and volume) of the nasal cavity, nasopharynx, oropharynx, and maxillary sinuses of university trumpet players versus non-trumpet playing controls. The second objective was to determine significant differences in the prevalence of airway pathologies between university trumpet players and controls. Method: Following IRB approval and consent and reliability studies, measurements of airway parameters and pathology were compared between 66 Caucasian trumpeters and 22 ethnicmatched controls. An analysis of covariance, with age and sex included as covariates, was used to compare the airway measures. Since there was a significant difference in gender and age, comparisons between groups for the presence of any airway pathologies was made using logistic regression including age and sex as covariates. A 5% significance level was used for all comparisons. Result: The trumpet players had significantly smaller nasal cavity volume (18028 + 595 mm3 vs. 25266 + 1116 mm3; p<0.0001) and significantly greater soft tissue thickness at CV2ia (3.29 + 0.10 mm vs 2.70 + 0.10 mm; p=0.03) and CV3sa (4.55 + 0.13 mm vs 3.74 + 0.14 mm; p=0.005) than the controls. No other airway measure demonstrated a significant difference between the two groups. Trumpeters had significantly (p=0.002) more airway pathology (n=33; 50%) than the controls (n=4; 18%). Antral pseudocysts or polyps composed 52% of trumpeter pathologies as compared with 0% controls. Conclusion: The only significant differences in airway dimensions between trumpet players and controls were decreased nasal cavity volume and some areas of prevertebral soft tissue thickness. Trumpeters were almost three times as likely to exhibit airway pathology when compared with controls. Funding: IUPUI Signature Center Initiative – 3D Imaging of the Craniofacial Complex Center and the Joseph and Aida Jarabak Endowed Professorship

Occurrence of Eimeria species parasites on small-scale commercial chicken farms in Africa and indication of economic profitability.

Small-scale commercial poultry production is emerging as an important form of livestock production in Africa, providing sources of income and animal protein to many poor households, yet the occurrence and impact of coccidiosis on this relatively new production system remains unknown. The primary objective of this study was to examine Eimeria parasite occurrence on small-scale commercial poultry farms in Ghana, Tanzania and Zambia. Additionally, farm economic viability was measured by calculating the farm gross margin and enterprise budget. Using these economic measures as global assessments of farm productivity, encompassing the diversity present in regional husbandry systems with a measure of fundamental local relevance, we investigated the detection of specific Eimeria species as indicators of farm profitability. Faecal samples and data on production parameters were collected from small-scale (less than 2,000 birds per batch) intensive broiler and layer farms in peri-urban Ghana, Tanzania and Zambia. All seven Eimeria species recognised to infect the chicken were detected in each country. Furthermore, two of the three genetic variants (operational taxonomic units) identified previously in Australia have been described outside of Australia for the first time. Detection of the most pathogenic Eimeria species associated with decreased farm profitability and may be considered as an indicator of likely farm performance. While a causal link remains to be demonstrated, the presence of highly pathogenic enteric parasites may pose a threat to profitable, sustainable small-scale poultry enterprises in Africa

Lateral scale calibration for focus variation microscopy

Areal surface texture measuring instruments can be calibrated by determining a set of metrological characteristics currently in the final stages of standardisation. In this paper, amplification, linearity and perpendicularity characteristics have been determined to calibrate the lateral performance of a focus variation microscope. The paper presents a novel and low-cost material measure and procedures that are used to determine the characteristics. The material measure is made of stainless steel with a cross-grating grid of hemispherical grooves. The design, manufacturing and calibration of the material measure are discussed. The (20 × 20) mm grid is measured with and without image stitching. The results show that the proposed material measure and procedures can be used to determine the error of the amplification, linearity and perpendicularity characteristics. In addition, the lateral stage error can be significantly reduced by measurement with image stitching

Review of the mathematical foundations of data fusion techniques in surface metrology

The recent proliferation of engineered surfaces, including freeform and structured surfaces, is challenging current metrology techniques. Measurement using multiple sensors has been proposed to achieve enhanced benefits, mainly in terms of spatial frequency bandwidth, which a single sensor cannot provide. When using data from different sensors, a process of data fusion is required and there is much active research in this area. In this paper, current data fusion methods and applications are reviewed, with a focus on the mathematical foundations of the subject. Common research questions in the fusion of surface metrology data are raised and potential fusion algorithms are discussed

Paternal and Maternal History of Myocardial Infarction and Cardiovascular Diseases Incidence in a Dutch Cohort of Middle-Aged Persons

Background - A positive parental history of myocardial infarction (MI) is an independent risk factor for cardiovascular diseases (CVD). However, different definitions of parental history have been used. We evaluated the impact of parental gender and age of onset of MI on CVD incidence. Methods - Baseline data were collected between 1993 and 1997 in 10¿524 respondents aged 40–65 years. CVD events were obtained from the National Hospital Discharge Register and Statistics Netherlands. We used proportional hazard models to calculate hazard ratios (HR) and 95% confidence intervals (CI) for CVD incidence and adjusted for lifestyle and biological risk factors. Results - At baseline, 36% had a parental history of MI. During 10-year follow-up, 914 CVD events occurred. The age and gender adjusted HR was 1.3 (95% CI 1.1–1.5) for those with a paternal MI, 1.5 (1.2–1.8) for those with a maternal MI and 1.6 (1.2–2.2) for those with both parents with an MI. With decreasing parental age of MI, HR increased from 1.2 (1.0–1.6) for age =70 years to 1.5 (1.2–1.8) for ag

Suffering in long-term cancer survivors: An evaluation of the PRISM-R2 in a population-based cohort

The Pictorial Representation of Illness and Self Measure-Revised 2 (PRISM-R2) has been developed as generic measure to assess suffering. The aim of this study was to evaluate the ability of this instrument to identify long-term cancer survivors with high levels of suffering who may need additional support. 1299 cancer survivors completed the PRISM-R2, the Short Form Health Survey (SF-36), and the Quality of Life-Cancer Survivors questionnaire (QoL-CS). The PRISM-R2 distinguishes between the Self-Illness Separation (SIS) and Illness Perception Measure (IPM), both measuring aspects of suffering. 112 (9%) cancer survivors reported high suffering according to IPM. This group had a higher cancer stage at diagnosis, more cancer recurrences, more comorbidities, and were lower educated compared to people reporting less suffering. The PRISM-R2 could explain substantial amounts of variance (10-14%) in the psychological aspects of the SF-36 and QoL-CS. The IPM also discriminated statistically and clinically significant between high- and low-health status. The PRISM-R2 proved to be able to discriminate between individuals with good and deteriorated levels of QoL. Further evaluation of its validity and screening potential is recommended

Whole exome sequencing study identifies novel rare and common Alzheimer's-Associated variants involved in immune response and transcriptional regulation

Correction: Volume: 25 Issue: 8 Pages: 1901-1903 DOI: 10.1038/s41380-019-0529-7The Alzheimer's Disease Sequencing Project (ADSP) undertook whole exome sequencing in 5,740 late-onset Alzheimer disease (AD) cases and 5,096 cognitively normal controls primarily of European ancestry (EA), among whom 218 cases and 177 controls were Caribbean Hispanic (CH). An age-, sex- andAPOEbased risk score and family history were used to select cases most likely to harbor novel AD risk variants and controls least likely to develop AD by age 85 years. We tested ~1.5 million single nucleotide variants (SNVs) and 50,000 insertion-deletion polymorphisms (indels) for association to AD, using multiple models considering individual variants as well as gene-based tests aggregating rare, predicted functional, and loss of function variants. Sixteen single variants and 19 genes that met criteria for significant or suggestive associations after multiple-testing correction were evaluated for replication in four independent samples; three with whole exome sequencing (2,778 cases, 7,262 controls) and one with genome-wide genotyping imputed to the Haplotype Reference Consortium panel (9,343 cases, 11,527 controls). The top findings in the discovery sample were also followed-up in the ADSP whole-genome sequenced family-based dataset (197 members of 42 EA families and 501 members of 157 CH families). We identified novel and predicted functional genetic variants in genes previously associated with AD. We also detected associations in three novel genes:IGHG3(p = 9.8 x 10(-7)), an immunoglobulin gene whose antibodies interact with beta-amyloid, a long non-coding RNAAC099552.4(p = 1.2 x 10(-7)), and a zinc-finger proteinZNF655(gene-based p = 5.0 x 10(-6)). The latter two suggest an important role for transcriptional regulation in AD pathogenesis.Peer reviewe

Associations between Potentially Modifiable Risk Factors and Alzheimer Disease: A Mendelian Randomization Study.

BACKGROUND: Potentially modifiable risk factors including obesity, diabetes, hypertension, and smoking are associated with Alzheimer disease (AD) and represent promising targets for intervention. However, the causality of these associations is unclear. We sought to assess the causal nature of these associations using Mendelian randomization (MR). METHODS AND FINDINGS: We used SNPs associated with each risk factor as instrumental variables in MR analyses. We considered type 2 diabetes (T2D, NSNPs = 49), fasting glucose (NSNPs = 36), insulin resistance (NSNPs = 10), body mass index (BMI, NSNPs = 32), total cholesterol (NSNPs = 73), HDL-cholesterol (NSNPs = 71), LDL-cholesterol (NSNPs = 57), triglycerides (NSNPs = 39), systolic blood pressure (SBP, NSNPs = 24), smoking initiation (NSNPs = 1), smoking quantity (NSNPs = 3), university completion (NSNPs = 2), and years of education (NSNPs = 1). We calculated MR estimates of associations between each exposure and AD risk using an inverse-variance weighted approach, with summary statistics of SNP-AD associations from the International Genomics of Alzheimer's Project, comprising a total of 17,008 individuals with AD and 37,154 cognitively normal elderly controls. We found that genetically predicted higher SBP was associated with lower AD risk (odds ratio [OR] per standard deviation [15.4 mm Hg] of SBP [95% CI]: 0.75 [0.62-0.91]; p = 3.4 × 10(-3)). Genetically predicted higher SBP was also associated with a higher probability of taking antihypertensive medication (p = 6.7 × 10(-8)). Genetically predicted smoking quantity was associated with lower AD risk (OR per ten cigarettes per day [95% CI]: 0.67 [0.51-0.89]; p = 6.5 × 10(-3)), although we were unable to stratify by smoking history; genetically predicted smoking initiation was not associated with AD risk (OR = 0.70 [0.37, 1.33]; p = 0.28). We saw no evidence of causal associations between glycemic traits, T2D, BMI, or educational attainment and risk of AD (all p > 0.1). Potential limitations of this study include the small proportion of intermediate trait variance explained by genetic variants and other implicit limitations of MR analyses. CONCLUSIONS: Inherited lifetime exposure to higher SBP is associated with lower AD risk. These findings suggest that higher blood pressure--or some environmental exposure associated with higher blood pressure, such as use of antihypertensive medications--may reduce AD risk.We thank the International Genomics of Alzheimer's Project (IGAP) for providing summary results data for these analyses. The investigators within IGAP contributed to the design and implementation of IGAP and/or provided data but did not participate in analysis or writing of this report. IGAP was made possible by the generous participation of the control subjects, the patients, and their families. The i–Select chips were funded by the French National Foundation on Alzheimer's disease and related disorders. EADI was supported by the LABEX (laboratory of excellence program investment for the future) DISTALZ grant, Inserm, Institut Pasteur de Lille, Université de Lille 2 and the Lille University Hospital. GERAD was supported by the Medical Research Council (Grant n° 503480), Alzheimer's Research UK (Grant n° 503176), the Wellcome Trust (Grant n° 082604/2/07/Z) and German Federal Ministry of Education and Research (BMBF): Competence Network Dementia (CND) grant n° 01GI0102, 01GI0711, 01GI0420. CHARGE was partly supported by the NIH/NIA grant R01 AG033193 and the NIA AG081220 and AGES contract N01–AG–12100, the NHLBI grant R01 HL105756, the Icelandic Heart Association, and the Erasmus Medical Center and Erasmus University. ADGC was supported by the NIH/NIA grants: U01 AG032984, U24 AG021886, U01 AG016976, and the Alzheimer's Association grant ADGC–10–196728.This is the final version of the article. It first appeared from PLOS via http://dx.doi.org/10.1371/journal.pmed.100184

Characterisation of the topography of metal additive surface features with different measurement technologies

The challenges of measuring the surface topography of metallic surfaces produced by additive manufacturing are investigated. The differences between measurements made using various optical and non-optical technologies, including confocal and focus-variation microscopy, coherence scanning interferometry and x-ray computed tomography, are examined. As opposed to concentrating on differences which may arise through computing surface texture parameters from measured topography datasets, a comparative analysis is performed focussing on investigation of the quality of the topographic reconstruction of a series of surface features. The investigation is carried out by considering the typical surface features of a metal powder-bed fusion process: weld tracks, weld ripples, attached particles and surface recesses. Results show that no single measurement technology provides a completely reliable rendition of the topographic features that characterise the metal powder-bed fusion process. However, through analysis of measurement discrepancies, light can be shed on where instruments are more susceptible to error, and why differences between measurements occur. The results presented in this work increase the understanding of the behaviour and performance of areal topography measurement, and thus promote the development of improved surface characterisation pipelines