70 research outputs found
Reconstruction and subsurface lattice distortions in the (2 Ă 1)O-Ni(110) structure: A LEED analysis
LEED analysis of the reconstructed (2 Ă 1)O-Ni(110) system clearly favors the âmissing rowâ structure over the âsaw-toothâ and âbuckled rowâ models. By using a novel computational procedure 8 structural parameters could be refined simultaneously, leading to excellent R-factors (RZJ = 0.09, RP = 0.18). The adsorbed O atoms are located 0.2 Ă
above the long bridge sites in [001] direction, presumably with a slight displacement ( 0.1 Ă
) in [1 0] direction to an asymmetric adsorption site. The nearest-neighbor Ni---O bond lengths (1.77 Ă
) are rather short. The separation between the topmost two Ni layers is expanded to 1.30 Ă
(bulk value 1.25 Ă
), while that between the second and third layer is slightly contracted to 1.23 Ă
. The third layer is, in addition, slightly buckled (±0.05 Ă
). The results are discussed on the basis of our present general knowledge about the structure of adsorbate covered metallic surfaces
First-Principles Studies of Hydrogenated Si(111)--77
The relaxed geometries and electronic properties of the hydrogenated phases
of the Si(111)-77 surface are studied using first-principles molecular
dynamics. A monohydride phase, with one H per dangling bond adsorbed on the
bare surface is found to be energetically favorable. Another phase where 43
hydrogens saturate the dangling bonds created by the removal of the adatoms
from the clean surface is found to be nearly equivalent energetically.
Experimental STM and differential reflectance characteristics of the
hydrogenated surfaces agree well with the calculated features.Comment: REVTEX manuscript with 3 postscript figures, all included in uu file.
Also available at http://www.phy.ohiou.edu/~ulloa/ulloa.htm
Volume I. Introduction to DUNE
The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decayâthese mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE\u27s physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology
Deep Underground Neutrino Experiment (DUNE), far detector technical design report, volume III: DUNE far detector technical coordination
The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decayâthese mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module
Highly-parallelized simulation of a pixelated LArTPC on a GPU
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 10^3 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype
Recommended from our members
Analyses of mixed-hydrocarbon binary thermodynamic cycles for moderate-temperature geothermal resources using regeneration techniques
Studies of basic binary geothermal cycles utilizing mixtures of hydrocarbons have shown better performance than for pure fluids for a moderate temperature (360/sup 0/F) resource. However, a loss is net geofluid effectiveness (watt-hours net plant output/1bm geofluid) results when the geofluid outlet temperature is limited to temperatures in excess of 160/sup 0/F to alleviate a silica precipitation problem. This study examined three working fluids consisting of binary mixtures of hydrocarbons to see if use of regenerative preheating techniques such as turbine exhaust recupation and/or turbine bleed could recover the loss in geofluid effectiveness for a 160/sup 0/F geofluid outlet temperature. Results showed that with the most promising of the three working fluids a turbine exhaust recuperator alone is sufficient to recover all the lost effectiveness while maintaining the geofluid outlet temperature at 160/sup 0/F. A brief study to investigate cold weather operation with that working fluid, and using the recuperator, showed no major detrimental response of the system; however, silica precipitation may present a problem in extremely cold weather, as the geofluid outlet temperature dropped below 160/sup 0/F for the lowest wet bulb temperatures studied
Recommended from our members
Steam-generator-tube-rupture transients for pressurized-water reactors
Steam generator tube ruptures with and without concurrent main-steam-line break are investigated for pressurized water reactors supplied by the major US vendors. The goal of these analyses is to provide thermodynamic and flow conditions for the determination of iodine transport to the environment and to provide an evaluation of the adequacy of the plant safety systems and operating procedures for controlling these transients. The automatic safety systems of the plant were found to be adequate for the mitigation of these transients. Emergency injection system flows equilibrated with the leakage flows and prevented core uncovery. Sufficient time was afforded by the plant safety systems for the operators to identify the problem and to take appropriate measures
Recommended from our members
Small-break LOCA recovery in B and W plants. [PWR]
A break of approximately 0.0012 m/sup 2/ in the cold leg of a B and W plant results in an interruption of natural circulation when steam accumulates in the hot-leg U-bend. A small-break loss-of-coolant accident of this size was simulated by TRAC-PF1 to evaluate strategies for recovery and for re-establishing natural circulation. In the absence of operator action, core cooling occurs when water supplied by the high-pressure-injection system boils, then is discharged through the break. Raising the steam-generator secondary level, venting steam from the steam-generator secondary, venting steam from the hog-leg U-bend, bumping the reactor-coolant pumps, and injecting a portion of the high-pressure-injection system into the hot-leg U-bend aided in cooling and depressurizing the primary system but were ineffective in re-establishing natural-circulation flows in the primary-coolant loops
- âŠ