Sensitive electrochemical determination of yohimbine in primary bark of natural aphrodisiacs using boron-doped diamond electrode

For the first time, a simple and sensitive analytical method for the direct determination of yohimbine is presented using differential pulse voltammetry with a boron-doped diamond electrode. Two irreversible oxidation peaks, a distinct one at +0.80 and a second poorly-defined one at +1.65 V, were observed when cyclic voltammetry was carried out in Britton-Robinson buffer solution at pH 7 (vs. Ag/AgCl). With optimized differential pulse voltammetric parameters (pulse amplitude 100 mV, pulse time 25 ms, step potential 5 mV and scan rate 10 mV s(-1)), the current response of yohimbine at +0.80 V was linearly proportional to the concentration in the range from 0.25 to 90.9 mu mol L-1 with a low detection limit of 0.13 mu mol L-1 (0.046 mg L-1) and a good repeatability (relative standard deviation of 2.5% at 18.4 mu mol L-1 for n = 6). The practical applicability of the developed method was demonstrated by the assessment of the total content of yohimbine in extracts of the primary bark of natural aphrodisiacs such as Pausinystalia yohimbe and Rauvolfia serpentina with recoveries in the range of 92-97%. The proposed electrochemical procedure represents an inexpensive and effective analytical alternative for the quality control analysis of products containing yohimbine and other biologically and structurally related alkaloids used as natural dietary supplements

Titanium nanoparticles (TiO2)/graphene oxide nanosheets (GO): an electrochemical sensing platform for the sensitive and simultaneous determination of benzocaine in the presence of antipyrine.

An effective electrochemical sensing platform for the simultaneous determination of benzocaine (BEN) and antipyrine (ANT) based upon titanium dioxide nanoparticle (TiO2)/graphene oxide nanosheet (GO) bulk modified carbon paste electrodes (TiO2-GO/CPE) is reported. The TiO2-GO/CPE electrochemical sensing platform is found to exhibit linear ranges from 1.0 × 10-6 to 1.0 × 10-4 M and 1.2 × 10-8 to 8.0 × 10-5 M for BEN and ANT, respectively. The TiO2-GO/CPE sensor is explored towards the analysis of BEN and ANT in oral fluid (saliva) and pharmaceutical products. The synergy between the graphene oxide nanosheets and titanium dioxide nanoparticles results in a dramatic enhancement in the sensitivity of the sensor through a combination of increased surface area and improved electron transfer kinetics compared to other electrode alternatives. The fabricated TiO2-GO/CPE exhibits high sensitivity and good stability towards the sensing of BEN and ANT and has the potential to be utilised as a clinical assay and QA in pharmaceutical products

Determination of Chloramphenicol by Differential Pulse Voltammetry at Carbon Paste Electrodes - the Use of Sodium Sulfite for Removal of Oxygen from Electrode Surface

The possibility of determination of chloramphenicol by differential pulse voltammetry at four different carbon paste electrodes, in the full pH range (2-12) of Britton-Robinson (BR) buffer was investigated. Electrodes were prepared by mixing spectroscopic graphite powder or glassy carbon microbeads with mineral oil (Nujol) or tricresyl phosphate. Under optimal conditions (BR buffer pH 12, the electrode prepared from glassy carbon microbeads and tricresyl phosphate), linear calibration graph was obtained only in 10-5 M chloramphenicol concentration range. Determination of lower concentrations of chloramphenicol was complicated by irreproducible peak of oxygen from the carbon paste which overlapped with peak of chloramphenicol. Addition of sodium sulfite removed the oxygen peak without influence on the peak of chloramphenicol. Under optimal conditions (electrode paste made from glassy carbon microbeads, BR buffer pH 10 and 0.5 M sodium sulfite), straight calibration line was obtained in the 10(-6) and 10(-5) M chloramphenicol concentration range. Limit of determination was 5 x 10(-7) mol/l

Simultaneous determination of sinapic acid and tyrosol by flow-injection analysis with multiple-pulse amperometric detection

Abstract: This work describes a simple, fast (frequency of 170 injections h−1), and low-cost method for the simultaneous determination of two antioxidants, sinapic acid and tyrosol, using multiple-pulse amperometric detection at a glassy carbon electrode incorporated in a flow-injection analysis cell. A sequence of potential pulses was selected to detect sinapic acid and tyrosol separately in the course of a single injection step. During the characterization of electrochemical detection, conditions for the determination of the two antioxidants (such as the injected volume and the flow rate) were studied and the analytical figures of merit were calculated. The repeatability (expressed as %) RSD was < 4.0% (n = 10) and excellent linearity was obtained across two concentration ranges from 1.0 to 100 μM; the limits of detection of sinapic acid and tyrosol were around 1.0 μM. Graphical abstract: [Figure not available: see fulltext.]. © 2018, Springer-Verlag GmbH Austria, part of Springer Nature

Simultaneous determination of tert-butylhydroquinone, propyl gallate, and butylated hydroxyanisole by flow-injection analysis with multiple-pulse amperometric detection

We report the first amperometric method for the simultaneous determination of tert-butylhydroquinone (tBHQ), propyl gallate (PG), and butylated hydroxyanisole (BHA) using flow injection analysis coupled to multiple-pulse amperometry. A sequence of potential pulses was selected in order to detect tBHQ, PG, and BHA separately in a single injection step at a glassy carbon electrode without the need of a preliminary separation. A mixture of methanol and 0.040 M Britton-Robinson buffer was used both as a carrier solution and for dilution of analyzed solutions before injection. The method is precise (RSD < 5%, n = 10), fast (a frequency of 140 injections h−1), provides sufficiently low quantification limits (2.51, 1.45, and 0.85 μmol L–1 for tBHQ, PG, and BHA, respectively) and can be easily applied without high demands on instrumentation. As a practical application, the determination of these antioxidants contained in commercial chewing gum samples was carried out by applying a simple extraction procedure. © 2017 Elsevier B.V

Determination of Total Phenols in Foods by Boron Doped Diamond Electrode

A robust electrochemical method to measure the total phenol content in food samples is presented. Under optimal condition, BDD electrode showed excellent performance to detect the oxidation of several phenols and does not present the drawback due to electrode fouling. The analytical method used to perform such measurement has been optimized and successfully applied in different food samples. The results obtained were compared with the standard Folin-Ciocalteau method