What clinicians who practice in countries reaching malaria elimination should be aware of: lessons learnt from recent experience in Sri Lanka

Following progressive reduction in confirmed cases of malaria from 2002 to 2007 (41,411 cases in 2002, 10,510 cases in 2003, 3,720 cases in 2004, 1,640 cases in 2005, 591 cases in 2006, and 198 cases in 2007). Sri Lanka entered the pre-elimination stage of malaria in 2008. One case of indigenous malaria and four other cases of imported malaria are highlighted here, as the only patients who presented to the Professorial Medical Unit, Colombo North Teaching Hospital, Ragama, Sri Lanka over the past eight years, in contrast to treating several patients a week about a decade ago. Therefore, at the eve of elimination of malaria from Sri Lanka, it is likely that the infection is mostly encountered among travellers who return from endemic areas, or among the military who serve in un-cleared areas of Northern Sri Lanka. They may act as potential sources of introducing malaria as until malaria eradication is carried out. These cases highlight that change in the symptomatology, forgetfulness regarding malaria as a cause of acute febrile illness and deterioration of the competency of microscopists as a consequence of the low disease incidence, which are all likely to contribute to the delay in the diagnosis. The importance regarding awareness of new malaria treatment regimens, treatment under direct observation, prompt notification of suspected or diagnosed cases of malaria and avoiding blind use of anti-malarials are among the other responsibilities expected of all clinicians who manage patients in countries reaching malaria elimination

Trust Perceptions of Online Travel Information by Different Content Creators: Some Social and Legal Implications

Consumers are increasingly turning to the online environment to provide information to assist them in making purchase decisions related to travel products. They often rely on travel recommendations from different sources, such as sellers, independent experts and, increasingly, other consumers. A new type of online content, usergenerated content (UGC), provides a number of legal and social challenges to providers and users of that content, especially in relation to areas such as defamation, misrepresentation and social embarrassment. This paper reports research that examined the level of trustworthiness of online travel information from these different sources. The study used a survey of Australian travel consumers (n= 12,000) and results support the notion that there are differences in the level of trust for online travel information from different sources. Respondents ‘tended to agree’ that they trusted information provided by travel agents, information from commercial operators and comments made by travellers on third party websites. However, the highest level of trust was afforded to information provided on State government tourism websites. These results suggest that greater trust is placed in online travel comments when they are on a specific travel website than when they are on a more generic social networking website. However, respondents were ‘not sure’ that they trusted comments made by travellers on weblogs and on social networking sites. Some 88% of respondents that had not visited UGC websites (or were unsure if they had) indicated that they thought that UGC would be useful in the future – suggesting that they feel that any concerns they may have in relation to legal and social problems resulting from its use will be resolved

IFNAR1-Signalling Obstructs ICOS-mediated Humoral Immunity during Non-lethal Blood-Stage Plasmodium Infection

Funding: This work was funded by a Career Development Fellowship (1028634) and a project grant (GRNT1028641) awarded to AHa by the Australian National Health & Medical Research Council (NHMRC). IS was supported by The University of Queensland Centennial and IPRS Scholarships. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer reviewedPublisher PD

Open labware: 3-D printing your own lab equipment

The introduction of affordable, consumer-oriented 3-D printers is a milestone in the current “maker movement,” which has been heralded as the next industrial revolution. Combined with free and open sharing of detailed design blueprints and accessible development tools, rapid prototypes of complex products can now be assembled in one’s own garage—a game-changer reminiscent of the early days of personal computing. At the same time, 3-D printing has also allowed the scientific and engineering community to build the “little things” that help a lab get up and running much faster and easier than ever before

Performance and usefulness of the Hexagon rapid diagnostic test in children with asymptomatic malaria living in the Mount Cameroon region

<p>Abstract</p> <p>Background</p> <p>Rapid and correct diagnosis of malaria is considered an important strategy in the control of the disease. However, it remains to be determined how well these tests can perform in those who harbour the parasite, but are asymptomatic, so that rapid diagnostic tests (RDTs) could be used in rapid mass surveillance in malaria control programmes.</p> <p>Methods</p> <p>Microscopic and immunochromatographic diagnosis of malaria were performed on blood samples from the hyperendemic Mount Cameroon region. Thin and thick blood films were stained with Giemsa and examined under light microscopy for malaria parasites. The RDT was performed on the blood samples for the detection of <it>Plasmodium </it>species. In addition, the performance characteristics of the test were determined using microscopy as gold standard.</p> <p>Results</p> <p>Results revealed 40.32% to be positive for microscopy and 34.41% to be positive for the RDT. Parasites were detected in a greater proportion of samples as the parasite density increase. <it>Plasmodium falciparum </it>was the predominant <it>Plasmodium </it>species detected in the study population either by microscopy or by the RDT. Overall, the test recorded a sensitivity and specificity of 85.33% and 95.05% respectively, and an accuracy of 91.40%. The sensitivity and specificity of the RDT increased as parasite densities increased.</p> <p>Conclusion</p> <p>The Hexagon Malaria Combi™ test showed a high sensitivity and specificity in diagnosing malaria in asymptomatic subjects and so could be suitable for use in mass surveillance programmes for the management and control of malaria.</p

Ethical Issues in Measuring Biomarkers in Children’s Environmental Health

Background: Studying the impact of environmental exposures is important in children because they are more vulnerable to adverse effects on growth, development, and health. Assessing exposure in children is difficult, and measuring biomarkers is potentially useful. Research measuring biomarkers in children raises a number of ethical issues, some of which relate to children as research subjects and some of which are specific to biomarker research. Objective: As an international group with experience in pediatric research, biomarkers, and the ethics of research in children, we highlight the ethical issues of undertaking biomarker research in children in these environments. Discussion: Significant issues include undertaking research in vulnerable communities, especially in developing countries; managing community expectations; obtaining appropriate consent to conduct the research; the potential conflicts of obtaining permission from an ethics review board in an economically developed country to perform research in a community that may have different cultural values; returning research results to participants and communities when the researchers are uncertain of how to interpret the results; and the conflicting ethical obligations of maintaining participant confidentiality when information about harm or illegal activities mandate reporting to authorities. Conclusion: None of these challenges are insurmountable and all deserve discussion. Pediatric biomarker research is necessary for advancing child health

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal