The Pulp and Paper Industry and Its Water Use: A Summary

This report describes the Pulp and Paper Industry. The production processes are summarized as is this industry's dependence upon enormous quantities of water. In as much as this report is intended to summarize a very complicated, multifaceted industry, a great deal of detail has been sacrificed for brevity and for a cleaner understanding of the industry taken as a whole. The summary is in three major parts. The first concerns size and importance of the pulp and paper industry, and includes basic statistics on pulp and paper manufacture for the world, the United states and selected other countries. Second an overview of the production processes involved in the manufacture of pulp and paper, this includes the various inputs and outputs associated with this industry. The third part of the report concerns itself with one of the major outputs of this industrial process: pollution

Rapid methods of landslide hazard mapping : Fiji case study

A landslide hazard probability map can help planners (1) prepare for, and/or mitigate against, the effects of landsliding on communities and infrastructure, and (2) avoid or minimise the risks associated with new developments. The aims of the project were to establish, by means of studies in a few test areas, a generic method by which remote sensing and data analysis using a geographic information system (GIS) could provide a provisional landslide hazard zonation map. The provision of basic hazard information is an underpinning theme of the UN’s International Decade for Natural Disaster Reduction (IDNDR). It is an essential requirement for disaster preparedness and mitigation planning. This report forms part of BGS project 92/7 (R5554) ‘Rapid assessment of landslip hazards’ Carried out under the ODA/BGS Technology Development and Research Programme as part of the British Government’s provision of aid to developing countries. It provides a detailed technical account of work undertaken in a test area in Viti Levu in collaboration with Fiji Mineral Resources Department. The study represents a demonstration of a methodology that is applicable to many developing countries. The underlying principle is that relationships between past landsliding events, interpreted from remote sensing, and factors such as the geology, relief, soils etc provide the basis for modelling where future landslides are most likely to occur. This is achieved using a GIS by ‘weighting’ each class of each variable (e.g. each lithology ‘class’ of the variable ‘geology’) according to the proportion of landslides occurring within it compared to the regional average. Combinations of variables, produced by summing the weights in individual classes, provide ‘models’ of landslide probability. The approach is empirical but has the advantage of potentially being able to provide regional scale hazard maps over large areas quickly and cheaply; this is unlikely to be achieved using conventional ground-based geotechnical methods. In Fiji, landslides are usually triggered by intense rain storms commonly associated with tropical cyclones. However, the regional distribution of landslides has not been mapped nor is it known how far geology and landscape influence the location and severity of landsliding events. The report discusses the remote sensing and GIS methodology, and describes the results of the pilot study over an area of 713 km2 in south east Viti Levu. The landslide model uses geology, elevation, slope angle, slope aspect, soil type, and forest cover as inputs. The resulting provisional landslide hazard zonation map, divided into high, medium and low zones of landslide hazard probability, suggests that whilst rainfall is the immediate cause, others controls do exert a significant influence. It is recommended that consideration be given in Fiji to implementing the techniques as part of a national strategic plan for landslide hazard zonation mapping

Water Demand A Selected Annotated Bibliography

Interest in water resources systems has been a critical part of resources and environment related research at IIASA since its inception. As countries undertake more and larger projects to meet their water use, the physical limitations of natural water supplies are becoming apparent. This in turn requires an increase in the degree of detail and sophistication of the analysis, including economic, social, and environmental evaluation of development alternatives aided by application of mathematical modelling techniques, to generate input for planning, design, and operational decisions. In the years 1976 and 1977 IIASA initiated a concentrated research effort focusing on modelling and forecasting of water demands. Our interest in this topic derives from the generally accepted realization that these fundamental aspects of water resources management have not been given due consideration in the past. This report, the seventh in the IIASA water demand series, consists of a selected annotated bibliography on water demand literature which came about as a result of IIASA's study on water demands

Killing-Yano tensors and some applications

The role of Killing and Killing-Yano tensors for studying the geodesic motion of the particle and the superparticle in a curved background is reviewed. Additionally the Papadopoulos list [74] for Killing-Yano tensors in G structures is reproduced by studying the torsion types these structures admit. The Papadopoulos list deals with groups G appearing in the Berger classification, and we enlarge the list by considering additional G structures which are not of the Berger type. Possible applications of these results in the study of supersymmetric particle actions and in the AdS/CFT correspondence are outlined.Comment: 36 pages, no figure

Development of a tight-binding potential for bcc-Zr. Application to the study of vibrational properties

We present a tight-binding potential based on the moment expansion of the density of states, which includes up to the fifth moment. The potential is fitted to bcc and hcp Zr and it is applied to the computation of vibrational properties of bcc-Zr. In particular, we compute the isothermal elastic constants in the temperature range 1200K < T < 2000K by means of standard Monte Carlo simulation techniques. The agreement with experimental results is satisfactory, especially in the case of the stability of the lattice with respect to the shear associated with C'. However, the temperature decrease of the Cauchy pressure is not reproduced. The T=0K phonon frequencies of bcc-Zr are also computed. The potential predicts several instabilities of the bcc structure, and a crossing of the longitudinal and transverse modes in the (001) direction. This is in agreement with recent ab initio calculations in Sc, Ti, Hf, and La.Comment: 14 pages, 6 tables, 4 figures, revtex; the kinetic term of the isothermal elastic constants has been corrected (Eq. (4.1), Table VI and Figure 4

Direct amplification of nodD from community DNA reveals the genetic diversity of Rhizobium leguminosarum in soil

Sequences of nodD, a gene found only in rhizobia, were amplified from total community DNA isolated from a pasture soil. The polymerase chain reaction (PCR) primers used, Y5 and Y6, match nodD from Rhizobium leguminosarum biovar trifolii, R. leguminosarum biovar viciae and Sinorhizobium meliloti. The PCR product was cloned and yielded 68 clones that were identified by restriction pattern as derived from biovar trifolii [11 restriction fragment length polymorphism (RFLP) types] and 15 clones identified as viciae (seven RFLP types). These identifications were confirmed by sequencing. There were no clones related to S. meliloti nodD. For comparison, 122 strains were isolated from nodules of white clover (Trifolium repens) growing at the field site, and 134 from nodules on trap plants of T. repens inoculated with the soil. The nodule isolates were of four nodD RFLP types, with 77% being of a single type. All four of these patterns were also found among the clones from soil DNA, and the same type was the most abundant, although it made up only 34% of the trifolii-like clones. We conclude that clover selects specific genotypes from the available soil population, and that R. leguminosarum biovar trifolii was approximately five times more abundant than biovar viciae in this pasture soil, whereas S. meliloti was rare

Impacts of local human activities on the Antarctic environment

We review the scientific literature, especially from the past decade, on the impacts of human activities on the Antarctic environment. A range of impacts has been identified at a variety of spatial and temporal scales. Chemical contamination and sewage disposal on the continent have been found to be long-lived. Contemporary sewage management practices at many coastal stations are insufficient to prevent local contamination but no introduction of non-indigenous organisms through this route has yet been demonstrated. Human activities, particularly construction and transport, have led to disturbances of flora and fauna. A small number of non-indigenous plant and animal species has become established, mostly on the northern Antarctic Peninsula and southern archipelagos of the Scotia Arc. There is little indication of recovery of overexploited fish stocks, and ramifications of fishing activity oil bycatch species and the ecosystem could also be far-reaching. The Antarctic Treaty System and its instruments, in particular the Convention for the Conservation of Antarctic Marine Living Resources and the Environmental Protocol, provide a framework within which management of human activities take place. In the face of the continuing expansion of human activities in Antarctica, a more effective implementation of a wide range of measures is essential, in order to ensure comprehensive protection of the Antarctic environment, including its intrinsic, wilderness and scientific values which remains a fundamental principle of the Antarctic Treaty System. These measures include effective environmental impact assessments, long-term monitoring, mitigation measures for non-indigenous species, ecosystem-based management of living resources, and increased regulation of National Antarctic Programmes and tourism activities

Electronic cigarettes: A position statement from the Thoracic Society of Australia and New Zealand*

The TSANZ develops position statements where insufficient data exist to write formal clinical guidelines. In 2018, the TSANZ addressed the question of potential benefits and health impacts of electronic cigarettes (EC). The working party included groups focused on health impacts, smoking cessation, youth issues and priority populations. The 2018 report on the Public Health Consequences of E-Cigarettes from the United States NASEM was accepted as reflective of evidence to mid-2017. A search for papers subsequently published in peer-reviewed journals was conducted in August 2018. A small number of robust and important papers published until March 2019 were also identified and included. Groups identified studies that extended, modified or contradicted the NASEM report. A total of 3793 papers were identified and reviewed, with summaries and draft position statements developed and presented to TSANZ membership in April 2019. After feedback from members and external reviewers, a collection of position statements was finalized in December 2019. EC have adverse lung effects and harmful effects of long-term use are unknown. EC are unsuitable consumer products for recreational use, part-substitution for smoking or long-term exclusive use by former smokers. Smokers who require support to quit smoking should be directed towards approved medication in conjunction with behavioural support as having the strongest evidence for efficacy and safety. No specific EC product can be recommended as effective and safe for smoking cessation. Smoking cessation claims in relation to EC should be assessed by established regulators

Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy

The objectives of this study were to investigate the effect of laser-induced surface features on the morphology, attachment and viability of mesenchymal stem cells (MSCs) at different periods of time, and to evaluate the biocompatibility of different zones: laser-melted zone (MZ), heat-affected zone (HAZ) and base metal (BM) in laser-treated NiTi alloy. The surface morphology and composition were studied by scanning electron microscope (SEM) and X-ray photoemission spectroscopy (XPS), respectively. The cell morphology was examined by SEM while the cell counting and viability measurements were done by hemocytometer and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) colorimetric assay. The results indicated that the laser-induced surface features, such as surface roughening, presence of anisotropic dendritic pattern and complete surface Ni oxidation were beneficial to improve the biocompatibility of NiTi as evidenced by the highest cell attachment (4 days of culture) and viability (7 days of culture) found in the MZ. The biocompatibility of the MZ was the best, followed by the BM with the HAZ being the worst. The defective and porous oxide layer as well as the coarse grained structure might attribute to the inferior cell attachment (4 days of culture) and viability (7 days of culture) on the HAZ compared with the BM which has similar surface morphology. © 2014 Elsevier B.V

Inflation, cold dark matter, and the central density problem

A problem with high central densities in dark halos has arisen in the context of LCDM cosmologies with scale-invariant initial power spectra. Although n=1 is often justified by appealing to the inflation scenario, inflationary models with mild deviations from scale-invariance are not uncommon and models with significant running of the spectral index are plausible. Even mild deviations from scale-invariance can be important because halo collapse times and densities depend on the relative amount of small-scale power. We choose several popular models of inflation and work out the ramifications for galaxy central densities. For each model, we calculate its COBE-normalized power spectrum and deduce the implied halo densities using a semi-analytic method calibrated against N-body simulations. We compare our predictions to a sample of dark matter-dominated galaxies using a non-parametric measure of the density. While standard n=1, LCDM halos are overdense by a factor of 6, several of our example inflation+CDM models predict halo densities well within the range preferred by observations. We also show how the presence of massive (0.5 eV) neutrinos may help to alleviate the central density problem even with n=1. We conclude that galaxy central densities may not be as problematic for the CDM paradigm as is sometimes assumed: rather than telling us something about the nature of the dark matter, galaxy rotation curves may be telling us something about inflation and/or neutrinos. An important test of this idea will be an eventual consensus on the value of sigma_8, the rms overdensity on the scale 8 h^-1 Mpc. Our successful models have values of sigma_8 approximately 0.75, which is within the range of recent determinations. Finally, models with n>1 (or sigma_8 > 1) are highly disfavored.Comment: 13 pages, 6 figures. Minor changes made to reflect referee's Comments, error in Eq. (18) corrected, references updated and corrected, conclusions unchanged. Version accepted for publication in Phys. Rev. D, scheduled for 15 August 200