A Guide for Aging Scaled Quail.

8 p

On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection

A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)

Prevalence of Rotational Malalignment after Infrapatellar Versus Suprapatellar Intramedullary Nailing of Tibial Shaft Fractures

Background: Up to 30% of patients with a tibial shaft fracture sustain iatrogenic rotational malalignment (RM) after infrapatellar (IP) nailing. Although IP nailing remains the management of choice for most patients, suprapatellar (SP) nailing has been gaining popularity. It is currently unknown whether SP nailing can provide superior outcomes with regard to tibial RM. The aim of this study was to compare the differences in the prevalence of RM following IP versus SP nailing.Methods: This retrospective study included 253 patients with a unilateral, closed tibial shaft fracture treated with either an IP or SP approach between January 2009 and April 2023 in a Level-I trauma center. All patients underwent a postoperative, protocolized, bilateral computed tomography (CT) scan for RM assessment.Results: RM was observed in 30% and 33% of patients treated with IP and SP nailing, respectively. These results indicate no significant difference (p = 0.639) in the prevalence of RM between approaches. Furthermore, there were no significant differences in the distribution (p = 0.553) and direction of RM (p = 0.771) between the 2 approaches. With the IP and SP approaches, nailing of left-sided tibial shaft fractures resulted in predominantly internal RM (85% and 73%, respectively), while nailing of right-sided tibial shaft fractures resulted in predominantly external RM (90% and 80%, respectively). The intraobserver reliability for the CT measurements was 0.95.Conclusions: The prevalence of RM was not influenced by the entry point of tibial nailing (i.e., IP versus SP). Hence, the choice of surgical approach should rely on factors other than the risk of RM.Level of Evidence: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.</p

Simultaneously improving the corrosion resistance and strength of magnesium via low levels of Zn and Ge additions

Satisfactory corrosion resistance remains an issue in the widespread implementation of magnesium (Mg). The use of alloying to improve mechanical properties of Mg generally accelerates corrosion due to microstructural heterogeneity. However, recent works have revealed that additions of elements serving as ‘cathodic poisons’ such as arsenic (As) and germanium (Ge) can reduce cathodic reaction rates and suppress cathodic activation - imparting corrosion resistance. The effect of Ge was translated into a ternary (and mechanically relevant) Mg-alloy system for the first time, revealing an alloy system with a balance of properties, and low rate of corrosion relative to Mg-alloys to date

Reducing the corrosion rate of magnesium via microalloying additions of group 14 and 15 elements

A characteristic of magnesium (Mg) dissolution is that dissolution is accompanied by a concomitant increase in the hydrogen evolution reaction (HER), a phenomenon known as cathodic activation. When magnesium undergoes free corrosion or forced dissolution in response to anodic polarisation, cathodic activation is manifest, which allows magnesium dissolution to readily proceed. However, recent work revealed that alloying magnesium with micro additions of arsenic, As (a group 15 element) was capable of retarding cathodic activation, resulting in a significant reduction in the corrosion rate of Mg-As alloys. As such, in the pursuit of elements with similar chemical and electrochemical properties to arsenic, but with less toxicity, a number of group 14 and 15 elements were alloyed with magnesium and reported herein. Based on the binary alloying additions studied herein, it was revealed that Bi, Ge, Pb, Sb and Sn, demonstrated suppression of cathodic activation of Mg following anodic polarisation (about one order of magnitude lower based on the cyclic galvanostatic-potentiostatic testing), in addition to lower free corrosion rates (about one order of magnitude based on the mass loss and hydrogen evolution testing). Employing a number of corrosion rate assessments, including online atomic emission spectroelectrochemistry, it was shown that reduction in Mg corrosion rates – historically considered difficult to achieve – can be robustly demonstrated. The present work has implications for the development of more corrosion resistant Mg alloys, Mg anodes for cathodic protection, or for the use of Mg as a primary battery electrode

Isotopic signatures of methane emissions from tropical fires, agriculture and wetlands: the MOYA and ZWAMPS flights

We report methane isotopologue data from aircraft and ground measurements in Africa and South America. Aircraft campaigns sampled strong methane fluxes over tropical papyrus wetlands in the Nile, Congo and Zambezi basins, herbaceous wetlands in Bolivian southern Amazonia, and over fires in African woodland, cropland and savannah grassland. Measured methane δ13CCH4 isotopic signatures were in the range −55 to −49‰ for emissions from equatorial Nile wetlands and agricultural areas, but widely −60 ± 1‰ from Upper Congo and Zambezi wetlands. Very similar δ13CCH4 signatures were measured over the Amazonian wetlands of NE Bolivia (around −59‰) and the overall δ13CCH4 signature from outer tropical wetlands in the southern Upper Congo and Upper Amazon drainage plotted together was −59 ± 2‰. These results were more negative than expected. For African cattle, δ13CCH4 values were around −60 to −50‰. Isotopic ratios in methane emitted by tropical fires depended on the C3 : C4 ratio of the biomass fuel. In smoke from tropical C3 dry forest fires in Senegal, δ13CCH4 values were around −28‰. By contrast, African C4 tropical grass fire δ13CCH4 values were −16 to −12‰. Methane from urban landfills in Zambia and Zimbabwe, which have frequent waste fires, had δ13CCH4 around −37 to −36‰. These new isotopic values help improve isotopic constraints on global methane budget models because atmospheric δ13CCH4 values predicted by global atmospheric models are highly sensitive to the δ13CCH4 isotopic signatures applied to tropical wetland emissions. Field and aircraft campaigns also observed widespread regional smoke pollution over Africa, in both the wet and dry seasons, and large urban pollution plumes. The work highlights the need to understand tropical greenhouse gas emissions in order to meet the goals of the UNFCCC Paris Agreement, and to help reduce air pollution over wide regions of Africa