The indispensability of good operation & maintenance (O&M) manuals in the operation and maintenance of low carbon buildings

Increase in energy usage, particularly from fossil fuel sources is widely understood to be responsible for the environmental problems (Climate Change) experienced globally today. Response to mitigating this anthropogenic induced consequence created the need for innovative low carbon and renewable technologies in buildings. In the UK presently, every new building is expected to be low-carbon and energy-efficient. However, it is widely acknowledged that significant differences often exist between designed and in-use performances of the buildings. Clients and end-users of these technologies appear not to be getting long term value for their investments; much attention has not been given to how these innovative technologies can be operated and maintained long into the future. Recent researches also underpin the fact that the wide information gap existing between designers and building end-users is one of the factors responsible for the performance-gap. This paper therefore presents excerpts of a research aimed at exploring a best practice approach to operability and maintainability of low-carbon-buildings. The research methodology involved the use of interviews, surveys and case study. Findings suggest that a properly prepared O&M manual is a potential document that that could bridge this gap and that it is an indispensable tool for the effective and efficient operation and maintenance of low carbon buildings

Building information modelling to cut disruption in housing retrofit

There is a large stock of solid-wall homes in the UK with poor thermal insulation and low energy performance. Although the UK government has supported efforts to improve these buildings, the identification of appropriate technical solutions that effectively improve the existing stock remains challenging. This research investigates how four dimensional building information modelling (4D BIM) could improve the retrofit of social housing, specifically that of ‘no-fines’ solid-wall homes, through the development of what-if scenarios that enable the analysis of alternative solutions considering costs, energy performance and disruption to users. This paper focuses on the use of 4D building information models to evaluate disruption to end users. The results indicate that the development of such models supports a better understanding of the retrofit process on site. It also supports the definition of production plans with as minimal disruption as possible to users while delivering energy-oriented and cost-effective solutions

Use of recycled products in UK construction industry: An empirical investigation into critical impediments and strategies for improvement

© 2014 Elsevier B.V. All rights reserved.Construction industry consumes about half of all material resources taken from nature, and generates a large portion of waste to landfill. A way of tackling negative environmental impacts impending from continuous material extraction and waste generation is the use of recycled materials for construction projects. However, the use of recycled materials is yet to become a commonplace in construction industry. This study evaluates the factors hampering the use of recycled products in UK construction industry as well as strategies that could be adopted to enhance its use in the industry. In order to identify the impediments and critical strategies, a two-fold methodical approach was used. An unstructured interview preceded a quantitative questionnaire survey which was used to elicit broader industry practitioners' opinion. The study shows that designers rarely specify recycled products. This is due to lack of adequate information about quality and market availability of the products, negative perception from clients, and unexpectedly high cost of the products, despite its perceived low quality. The study suggests that a number of strategies could be adopted to promote the use of the products. These include allocation of points to the use of recycled products in sustainable design appraisal tools, governments legislative measures, improved collaboration between designers, contractors and materials suppliers, contractors involvement at earlier stage of design, improved education of the professionals about the products, and the use of tax break to influence the cost of the products. The findings of this study would therefore help policy makers, manufacturers and construction professionals to identify the factors hampering the use of recycled products for construction projects as well as the strategies that could be adopted in order to create market for the products

Neural network modelling of RC deep beam shear strength

YesA 9 x 18 x 1 feed-forward neural network (NN) model trained using a resilient back-propagation algorithm and early stopping technique is constructed to predict the shear strength of deep reinforced concrete beams. The input layer covering geometrical and material properties of deep beams has nine neurons, and the corresponding output is the shear strength. Training, validation and testing of the developed neural network have been achieved using a comprehensive database compiled from 362 simple and 71 continuous deep beam specimens. The shear strength predictions of deep beams obtained from the developed NN are in better agreement with test results than those determined from strut-and-tie models. The mean and standard deviation of the ratio between predicted capacities using the NN and measured shear capacities are 1.028 and 0.154, respectively, for simple deep beams, and 1.0 and 0.122, respectively, for continuous deep beams. In addition, the trends ascertained from parametric study using the developed NN have a consistent agreement with those observed in other experimental and analytical investigations

Cost-effective sewage treatment Predevelopment trials of the CIRIA prototype optimising model

10.00Available from British Library Document Supply Centre- DSC:7411.112(CIRIA--86) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Sustainable urban drainage systems Best practice manual for England, Scotland, Wales and Northern Ireland

SIGLEAvailable from British Library Document Supply Centre-DSC:3265.8550(523/2001) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

CDM regulations - work sector guidance for designers

Prepared by Ove Arup and Partners (GB); CDM - Construction (Design and Management) Regulations 1994Available from British Library Document Supply Centre-DSC:7411.112(166) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Environmental impact of materials Volume A - summary

Vol. 1 of 6Available from British Library Document Supply Centre- DSC:8377.36(CIRIA-SP--116) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

National quality assurance forum for consruction

SIGLEAvailable from British Library Document Supply Centre- DSC:8377.36(CIRIA-SP--50) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Managing organisational change The key to survival in construction?: workshop report

Produced for the Construction Productivity Network; report of a workshop at the National Motorcycle Museum, Solihull (GB) 24 June 1999SIGLEAvailable from British Library Document Supply Centre-DSC:5546.9488(9085) / BLDSC - British Library Document Supply CentreGBUnited Kingdo