157 research outputs found
From Ecological Stoichiometry to Biochemical Composition: Variation in N and P Supply Alters Key Biosynthetic Rates in Marine Phytoplankton
Optimized fabrication of high quality La0.67Sr0.33MnO3 thin films considering all essential characteristics
In this article, an overview of the fabrication and properties of high
quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high quality LSMO film
combines a smooth surface morphology with a large magnetization and a small
residual resistivity, while avoiding precipitates and surface segregation. In
literature, typically only a few of these issues are adressed. We therefore
present a thorough characterization of our films, which were grown by pulsed
laser deposition. The films were characterized with reflection high energy
electron diffraction, atomic force microscopy, x-ray diffraction, magnetization
and transport measurements, x-ray photoelectron spectroscopy and scanning
transmission electron microscopy. The films have a saturation magnetization of
4.0 {\mu}B/Mn, a Curie temperature of 350 K and a residual resistivity of 60
{\mu}{\Omega}cm. These results indicate that high quality films, combining both
large magnetization and small residual resistivity, were realized. A comparison
between different samples presented in literature shows that focussing on a
single property is insufficient for the optimization of the deposition process.
For high quality films, all properties have to be adressed. For LSMO devices,
the thin film quality is crucial for the device performance. Therefore, this
research is important for the application of LSMO in devices.Comment: Accepted for publication in Journal of Physics D - Applied Physic
Складові компоненти мовної особистості в контексті міжкультурної комунікації
Стаття присвячена аналізу складових компонентів мовної особистості в контексті міжкультурної комунікації, їх взаємодії та функціонуванню з точки зору прагматичної спрямованості мовленнєвого впливу. Детально розглядаються три рівні структури мовної особистості (структурно-мовний, лінгвокогнітивний ті мотиваційний) із визначенням специфіки їхніх складових компонентів.Статья посвящена анализу составляющих компонентов языковой личности в контексте межкультурной коммуникаций, их взаимодействию и функционированию с точки зрения прагматической направленности речевого воздействия. Детально рассматриваются три уровня структуры языковой личности (структурно-языковой, лингвокогнитивный и мотивационный) с последующим определением специфики их составляющих компонентов.The article is dedicated to the linguistic personality constituent components' analysis in terms of cross-cultural communication, their interaction and functioning with the speech influence pragmatic orientation taken into consideration. The three levels of the linguistic personality (that is, structural linguistic, lingo cognitive and motivation ones) are under analysis with the following their constituent components specificity determinatio
Optimized fabrication of high-quality La0.67Sr0.33MnO3 thin films considering all essential characteristics
In this paper, an overview of the fabrication and properties of high-quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high-quality LSMO film combines a smooth surface morphology with a large magnetization and a small residual resistivity, while avoiding precipitates and surface segregation. In the literature, typically only a few of these issues are adressed. We therefore present a thorough characterization of our films, which were grown by pulsed laser deposition. The films were characterized with reflection high energy electron diffraction, atomic force microscopy, x-ray diffraction, magnetization and transport measurements, x-ray photoelectron spectroscopy and scanning transmission electron microscopy. The films have a saturation magnetization of 4.0 µB/Mn, a Curie temperature of 350 K and a residual resistivity of 60 µΩ cm. These results indicate that high-quality films, combining both large magnetization and small residual resistivity, were realized. A comparison between different samples presented in the literature shows that focussing on a single property is insufficient for the optimization of the deposition process. For high-quality films, all properties have to be adressed. For LSMO devices, the thin-film quality is crucial for the device performance. Therefore, this research is important for the application of LSMO in devices
Tunable Emergent Heterostructures in a Prototypical Correlated Metal
At the interface between two distinct materials desirable properties, such as
superconductivity, can be greatly enhanced, or entirely new functionalities may
emerge. Similar to in artificially engineered heterostructures, clean
functional interfaces alternatively exist in electronically textured bulk
materials. Electronic textures emerge spontaneously due to competing
atomic-scale interactions, the control of which, would enable a top-down
approach for designing tunable intrinsic heterostructures. This is particularly
attractive for correlated electron materials, where spontaneous
heterostructures strongly affect the interplay between charge and spin degrees
of freedom. Here we report high-resolution neutron spectroscopy on the
prototypical strongly-correlated metal CeRhIn5, revealing competition between
magnetic frustration and easy-axis anisotropy -- a well-established mechanism
for generating spontaneous superstructures. Because the observed easy-axis
anisotropy is field-induced and anomalously large, it can be controlled
efficiently with small magnetic fields. The resulting field-controlled magnetic
superstructure is closely tied to the formation of superconducting and
electronic nematic textures in CeRhIn5, suggesting that in-situ tunable
heterostructures can be realized in correlated electron materials
A Real Space Description of Magnetic Field Induced Melting in the Charge Ordered Manganites: I. The Clean Limit
We study the melting of charge order in the half doped manganites using a
model that incorporates double exchange, antiferromagnetic superexchange, and
Jahn-Teller coupling between electrons and phonons. We primarily use a real
space Monte Carlo technique to study the phase diagram in terms of applied
field and temperature , exploring the melting of charge order with
increasing and its recovery on decreasing . We observe hysteresis in
this response, and discover that the `field melted' high conductance state can
be spatially inhomogeneous even without extrinsic disorder. The hysteretic
response plays out in the background of field driven equilibrium phase
separation. Our results, exploring , , and the electronic parameter
space, are backed up by analysis of simpler limiting cases and a Landau
framework for the field response. This paper focuses on our results in the
`clean' systems, a companion paper studies the effect of cation disorder on the
melting phenomena.Comment: 16 pages, pdflatex, 11 png fig
Forearm muscle oxidative capacity index predicts sport rock-climbing performance
Abstract: Rock-climbing performance is largely dependent on the endurance of the forearm flexors. Recently, it was reported that forearm flexor endurance in elite climbers is independent of the ability to regulate conduit artery (brachial) blood flow, suggesting that endurance is not primarily dependent on the ability of the brachial artery to deliver oxygen, but rather the ability of the muscle to perfuse and use oxygen, i.e., skeletal muscle oxidative capacity. Purpose: The aim of the study was to determine whether an index of oxidative capacity in the flexor digitorum profundus (FDP) predicts the best sport climbing red-point grade within the last 6 months. Participants consisted of 46 sport climbers with a range of abilities. Methods: Using near-infrared spectroscopy, the oxidative capacity index of the FDP was assessed by calculating the half-time for tissue oxygen resaturation (O2HTR) following 3–5 min of ischemia. Results: Linear regression, adjusted for age, sex, BMI, and training experience, revealed a 1-s decrease in O2HTR was associated with an increase in red-point grade by 0.65 (95 % CI 0.35–0.94, Adj R2 = 0.53). Conclusions: Considering a grade of 0.4 separated the top four competitors in the 2015 International Federation Sport Climbing World Cup, this finding suggests that forearm flexor oxidative capacity index is an important determinant of rock-climbing performance
Towards Oxide Electronics:a Roadmap
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore's law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics
Revisiting the Local Structure in Ge-Sb-Te based Chalcogenide Superlattices.
The technological success of phase-change materials in the field of data storage and functional systems stems from their distinctive electronic and structural peculiarities on the nanoscale. Recently, superlattice structures have been demonstrated to dramatically improve the optical and electrical performances of these chalcogenide based phase-change materials. In this perspective, unravelling the atomistic structure that originates the improvements in switching time and switching energy is paramount in order to design nanoscale structures with even enhanced functional properties. This study reveals a high- resolution atomistic insight of the [GeTe/Sb2Te3] interfacial structure by means of Extended X-Ray Absorption Fine Structure spectroscopy and Transmission Electron Microscopy. Based on our results we propose a consistent novel structure for this kind of chalcogenide superlattices
- …