Assessment and analysis of territorial experiences in digital tele-echocardiography

Nowadays digital ultrasound-cardiovascular devices are able to send out directly digital images and films. Thanks to the large adoption of such devices, the echocardiographic world is facing new ways of exchanging images and collaborating. What we present in this paper is a review of the experimental projects carried in Lombardy, meant to support the work of specialists by means of second opinion and telemedicine services. On the medical point of view echocardiography is a widely used activity where operators are perfectly accustomed to do repetitive operations and steps. Tele-echocardiography (T-E) introduces new methods and technologies into stable and everyday medical practice, causing disruptions either on the side of the specialists' way of working or on the new opportunities and service. Introducing such a service means to properly model it in order to reduce the changes in the operators' way of working while maximizing the benefits. A proper method of modelling the operators' needs is then a key factor which must be correctly addressed. This paper will present some successful projects and the assessment procedure but it will also discuss a possible service modelling method, which has been adopted for the described experiences

Arts en cour. Les Garde-Meubles en Europe (XVIe-XXIe siècles)

Il volume descrive le vicende storiche delle istituzioni di conservazione e manutenzione degli arredi dei palazzi reali europei, focalizzando gli organismi ormai scomparsi e quelli invece ancora attivi. Una particolare attenzione è data all'intreccio con le manifatture reali e le campagne di riallestimento degli appartament

On Partial Compositeness and the CP asymmetry in charm decays

Recently, the LHCb and CDF collaborations reported the measure of an unexpectedly large direct CP asymmetry in D meson decays. In this paper we ask if new physics associated with Partial Compositeness could plausibly explain this result. We find that Composite Higgs models with mass scale around 10 TeV can account for it, while marginally satisfying all other flavor constraints in the quark sector. The minimal framework is however inadequate in the lepton sector due to the strong constraint from \mu\ to e \gamma. This tension can be efficiently alleviated by realizing Partial Compositeness within Supersymmetry. The resulting models can saturate the CP asymmetry in D decays for superpartner masses close to the TeV scale and somewhat large A-terms. The supersymmetric realization of Partial Compositeness also offers a predictive and phenomenologically viable organizing principle for R-Parity violation, and may result in very distinctive signatures at hadron colliders. With or without Supersymmetry, the neutron EDM is expected to be around the present experimental sensitivity.Comment: 35 pages, 2 tables, 3 figures. v2: published versio

Time to treatment with bridging intravenous alteplase before endovascular treatment:subanalysis of the randomized controlled SWIFT-DIRECT trial.

BACKGROUND We hypothesized that treatment delays might be an effect modifier regarding risks and benefits of intravenous thrombolysis (IVT) before mechanical thrombectomy (MT). METHODS We used the dataset of the SWIFT-DIRECT trial, which randomized 408 patients to IVT+MT or MT alone. Potential interactions between assignment to IVT+MT and expected time from onset-to-needle (OTN) as well as expected time from door-to-needle (DTN) were included in regression models. The primary outcome was functional independence (modified Rankin Scale (mRS) 0-2) at 3 months. Secondary outcomes included mRS shift, mortality, recanalization rates, and (symptomatic) intracranial hemorrhage at 24 hours. RESULTS We included 408 patients (IVT+MT 207, MT 201, median age 72 years (IQR 64-81), 209 (51.2%) female). The expected median OTN and DTN were 142 min and 54 min in the IVT+MT group and 129 min and 51 min in the MT alone group. Overall, there was no significant interaction between OTN and bridging IVT assignment regarding either the functional (adjusted OR (aOR) 0.76, 95% CI 0.45 to 1.30) and safety outcomes or the recanalization rates. Analysis of in-hospital delays showed no significant interaction between DTN and bridging IVT assignment regarding the dichotomized functional outcome (aOR 0.48, 95% CI 0.14 to 1.62), but the shift and mortality analyses suggested a greater benefit of IVT when in-hospital delays were short. CONCLUSIONS We found no evidence that the effect of bridging IVT on functional independence is modified by overall or in-hospital treatment delays. Considering its low power, this subgroup analysis could have missed a clinically important effect, and exploratory analysis of secondary clinical outcomes indicated a potentially favorable effect of IVT with shorter in-hospital delays. Heterogeneity of the IVT effect size before MT should be further analyzed in individual patient meta-analysis of comparable trials. TRIAL REGISTRATION NUMBER URL: https://www. CLINICALTRIALS gov ; Unique identifier: NCT03192332

b-tagging in DELPHI at LEP

Abstract: The standard method used for tagging b-hadrons in the DELPHI experiment at the CERN LEP Collider is discussed in detail. The main ingredient of b-tagging is the impact parameters of tracks, which relies mostly on the vertex detector. Additional information, such as the mass of particles associated to a secondary vertex, significantly improves the selection efficiency and the background suppression. The paper describes various discriminating variables used for the tagging and the procedure of their combination. In addition, applications of b-tagging to some physics analyses, which depend crucially on the performance and reliability of b-tagging, are described briefly

Measurement of the Tau Lepton Polarisation at LEP2

A first measurement of the average polarisation P_tau of tau leptons produced in e+e- annihilation at energies significantly above the Z resonance is presented. The polarisation is determined from the kinematic spectra of tau hadronic decays. The measured value P_tau = -0.164 +/- 0.125 is consistent with the Standard Model prediction for the mean LEP energy of 197 GeV.A first measurement of the average polarisation Pτ of tau leptons produced in e + e − annihilation at energies significantly above the Z resonance is presented. The polarisation is determined from the kinematic spectra of tau hadronic decays. The measured value Pτ=−0.164±0.125 is consistent with the Standard Model prediction for the mean LEP energy of 197 GeV.A first measurement of the average polarisation P_tau of tau leptons produced in e+e- annihilation at energies significantly above the Z resonance is presented. The polarisation is determined from the kinematic spectra of tau hadronic decays. The measured value P_tau = -0.164 +/- 0.125 is consistent with the Standard Model prediction for the mean LEP energy of 197 GeV

Design concepts for the Cherenkov Telescope Array CTA: an advanced facility for ground-based high-energy gamma-ray astronomy

Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV-10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will consist of two arrays (one in the north, one in the south) for full sky coverage and will be operated as open observatory. The design of CTA is based on currently available technology. This document reports on the status and presents the major design concepts of CTA

Euclid Near Infrared Spectrometer and Photometer instrument concept and first test results obtained for different breadboards models at the end of phase C

The Euclid mission objective is to understand why the expansion of the Universe is accelerating through by mapping the geometry of the dark Universe by investigating the distance-redshift relationship and tracing the evolution of cosmic structures. The Euclid project is part of ESA's Cosmic Vision program with its launch planned for 2020 (ref [1]). The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments and is operating in the near-IR spectral region (900- 2000nm) as a photometer and spectrometer. The instrument is composed of: - a cold (135K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly (corrector and camera lens), a filter wheel mechanism, a grism wheel mechanism, a calibration unit and a thermal control system - a detection subsystem based on a mosaic of 16 HAWAII2RG cooled to 95K with their front-end readout electronic cooled to 140K, integrated on a mechanical focal plane structure made with molybdenum and aluminum. The detection subsystem is mounted on the optomechanical subsystem structure - a warm electronic subsystem (280K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data This presentation describes the architecture of the instrument at the end of the phase C (Detailed Design Review), the expected performance, the technological key challenges and preliminary test results obtained for different NISP subsystem breadboards and for the NISP Structural and Thermal model (STM)

Determinants of Left Atrial Compliance in the Metabolic Syndrome: Insights from the “Linosa Study”

The association between left atrial (LA) impairment and cardiovascular diseases (CVD) and between dyslipidaemia and CVD are well known. The present study aims to investigate the relationships between metabolic factors and LA dimensions and compliance, as well as test the hypothesis that metabolic factors influence LA function independent from hemodynamic mechanisms. Arterial blood pressure (BP), waist and hip circumference, metabolic indices, and a complete echocardiographic assessment were obtained from 148 selected inhabitants (M/F 89/59; age 20–86 years) of Linosa Island, who had no history of CVD. At enrollment, 27.7% of the subjects met the criteria for metabolic syndrome (MetS) and 15.5% for arterial hypertension (HTN). LA compliance was reduced in subjects with MetS compared to those without (53 ± 27% vs. 71 ± 29%, p = 0.04) and was even lower (32 ± 17%, p = 0.01) in those with MetS and HTN. At multiple regression analysis, the presence of MetS independently determined LA maximal area (r = 0.56, p < 0.001), whereas systolic BP and the total cholesterol/HDL cholesterol ratio determined LA compliance (r = 0.41, p < 0.001). In an apparently healthy population with a high prevalence of MetS, dyslipidaemia seems to independently influence LA compliance. At a 5-year follow-up, LA compliance was reduced in both all-cause and CVD mortality groups, and markedly impaired in those who died of CVD. These findings may contribute to understanding the prognostic role of LA function in CVD and strengthen the need for early and accurate lipid control strategies

Caractérisation mécanique des matériaux pour les micro/nanosystèmes (procédés applicables aux épaisseurs submicroniques)

Ce travail s inscrit dans le contexte actuel de la réduction des dimensions des microsystèmes électromécaniques (MEMS). Afin d optimiser leurs performances, il est nécessaire de caractériser les principales propriétés mécaniques des matériaux en films minces mono et multicouches d épaisseurs submicroniques les constituant. L objectif de ce travail est d évaluer plusieurs méthodes de caractérisation mécanique statiques ou dynamiques adaptées aux épaisseurs submicroniques. La démarche expérimentale consiste à caractériser différentes microstructures déformables qui sont réalisées par les microtechnologies silicium : membranes et micropoutres de différentes géométries. Les expériences sont menées sur des matériaux de référence de la microélectronique en films minces autoportés. Les principales méthodes de caractérisation sont : le gonflement de membrane, l application d une force ponctuelle sur membrane, la vibrométrie appliquée à des membranes et la flexion de micropoutres. Des simulations par éléments finis sont effectuées sur ces structures de test afin de valider ou d optimiser les modèles mécaniques régissant leur comportement. Un comparatif de ces méthodes expérimentales est établi. L intérêt de l utilisation de la microscopie en champs proche est démontré pour l étude de structures submicroniques. Une nouvelle méthode optique, basée sur la microscopie à force atomique, est abordée afin de caractériser des micropoutres par l étude de leurs fluctuations thermiques.VILLEURBANNE-DOC'INSA LYON (692662301) / SudocSudocFranceF