1,519 research outputs found
Recommended from our members
Analysis of the topography of microchannels with different sizes
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.The longterm aim in the design of modern evaporators is to find a heat transfer calculation method based on the phenomena of growing and departing vapour bubbles on the heated surface. New developments in computer calculation and in measurement technique support the local analysis of the heat transfer, bubble formation and the microstructure of the heated surface. All three kinds of data originate from the same
equipment and from experiments performed with equal detail and precision. The influence of different rough and structured surfaces on the heat transfer coefficient will be investigated by a joint research project of Brunel and Hannover Universities with refrigerants boiling in single microchannels of different inner diameter. The microchannels are capillary tubes and they are manufactured by industrial processes. The samples of the microchannels have to be prepared by special methods, because the surfaces inside the microchannels cannot be measured in the same way as used for the heat transfer measurements. The microstructure of the surfaces of three microchannels (D = 0.4, 0.5 and 0.8mm) is measured by a contact stylus instrument. The paper will focus on the detailed description of the profiles and
the topographies of the samples. The roughness parameter in accordance with standard practice are calculated for ca 1000 runs (profiles). The roughness parameters of the smaller microchannels are twofold higher than those of the largest microchannel investigated. The scattering of the roughness of the largest microchannel (D = 0.8 mm) is less and the cavities are smaller than those of the other ones (D = 0.4 and
0.5 mm). All surfaces investigated demonstrate a deterministic microstructure as for emery ground surfaces on smooth tubes in the literature
Measurement of the fraction of t-tbar production via gluon-gluon fusion in p-pbar collisions at sqrt(s)=1.96 TeV
We present a measurement of the ratio of t-tbar production cross section via
gluon-gluon fusion to the total t-tbar production cross section in p-pbar
collisions at sqrt{s}=1.96 TeV at the Tevatron. Using a data sample with an
integrated luminosity of 955/pb recorded by the CDF II detector at Fermilab, we
select events based on the t-tbar decay to lepton+jets. Using an artificial
neural network technique we discriminate between t-tbar events produced via
q-qbar annihilation and gluon-gluon fusion, and find
Cf=(gg->ttbar)/(pp->ttbar)<0.33 at the 68% confidence level. This result is
combined with a previous measurement to obtain the most precise measurement of
this quantity, Cf=0.07+0.15-0.07.Comment: submitted to Phys. Rev.
Measurement of Resonance Parameters of Orbitally Excited Narrow B^0 Mesons
We report a measurement of resonance parameters of the orbitally excited
(L=1) narrow B^0 mesons in decays to B^{(*)+}\pi^- using 1.7/fb of data
collected by the CDF II detector at the Fermilab Tevatron. The mass and width
of the B^{*0}_2 state are measured to be m(B^{*0}_2) =
5740.2^{+1.7}_{-1.8}(stat.) ^{+0.9}_{-0.8}(syst.) MeV/c^2 and \Gamma(B^{*0}_2)
= 22.7^{+3.8}_{-3.2}(stat.) ^{+3.2}_{-10.2}(syst.) MeV/c^2. The mass difference
between the B^{*0}_2 and B^0_1 states is measured to be
14.9^{+2.2}_{-2.5}(stat.) ^{+1.2}_{-1.4}(syst.) MeV/c^2, resulting in a B^0_1
mass of 5725.3^{+1.6}_{-2.2}(stat.) ^{+1.4}_{-1.5}(syst.) MeV/c^2. This is
currently the most precise measurement of the masses of these states and the
first measurement of the B^{*0}_2 width.Comment: 7 pages, 1 figure, 1 table. Submitted to Phys.Rev.Let
Search for lepton flavor violating decays of a heavy neutral particle in p-pbar collisions at root(s)=1.8 TeV
We report on a search for a high mass, narrow width particle that decays
directly to e+mu, e+tau, or mu+tau. We use approximately 110 pb^-1 of data
collected with the Collider Detector at Fermilab from 1992 to 1995. No evidence
of lepton flavor violating decays is found. Limits are set on the production
and decay of sneutrinos with R-parity violating interactions.Comment: Figure 2 fixed. Reference 4 fixed. Minor changes to tex
Biophysical Measurements of Cells, Microtubules, and DNA with an Atomic Force Microscope
Atomic force microscopes (AFMs) are ubiquitous in research laboratories and
have recently been priced for use in teaching laboratories. Here we review
several AFM platforms (Dimension 3000 by Digital Instruments, EasyScan2 by
Nanosurf, ezAFM by Nanomagnetics, and TKAFM by Thorlabs) and describe various
biophysical experiments that could be done in the teaching laboratory using
these instruments. In particular, we focus on experiments that image biological
materials and quantify biophysical parameters: 1) imaging cells to determine
membrane tension, 2) imaging microtubules to determine their persistence
length, 3) imaging the random walk of DNA molecules to determine their contour
length, and 4) imaging stretched DNA molecules to measure the tensional force.Comment: 29 page preprint, 7 figures, 1 tabl
The impact of marketisation on postgraduate career preparedness in a high skills economy
This study focuses on the consequences for high skills development of the erosion of the once clear demarcation between higher education and business. It contributes to the broader debate about the relevance of higher education for thewell-being of the society of the future. The research explores the effects of marketisation on the postgraduate curriculum and students’ preparedness for careers in public relations and marketing communications. Interviews with lecturers and students in two universities in the UK and Australia indicate that a tension exists between academic rigour and corporate relevancy. The consequences are a diminution of academic attachment to critique and wider social/cultural engagement, with a resulting impoverishment of students’ creative abilities and critical consciences. Subsequently, graduates of public relations and marketing communications, and to some extent those from other profession-related disciplines, are insufficiently prepared for careers as knowledge workers in a future high-skills economy
Search for a Higgs Boson Decaying to Two W Bosons at CDF
We present a search for a Higgs boson decaying to two W bosons in ppbar collisions at sqrt(s)=1.96 TeV center-of-mass energy. The data sample corresponds to an integrated luminosity of 3.0 fb-1 collected with the CDF II detector. We find no evidence for production of a Higgs boson with mass between 110 and 200 GeV/c^2, and determine upper limits on the production cross section. For the mass of 160 GeV/c^2, where the analysis is most sensitive, the observed (expected) limit is 0.7 pb (0.9 pb) at 95% Bayesian credibility level which is 1.7 (2.2) times the standard model cross section
Top Quark Mass Measurement in the Lepton plus Jets Channel Using a Modified Matrix Element Method
46 pages, 16 figures. Edited in response to referee comments and resubmitted to Phys. Rev. DWe report a measurement of the top quark mass, m_t, obtained from ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9 fb^-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, with effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of m_t and a parameter JES that determines /in situ/ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find m_t = 172.7 +/- 1.8 (stat. + JES) +/- 1.2 (syst.) GeV/c^2.We report a measurement of the top quark mass, mt, obtained from pp̅ collisions at √s=1.96 TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9 fb-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, where the matrix element is modified by using effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of mt and a parameter JES (jet energy scale) that determines in situ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find mt=172.7±1.8(stat+JES)±1.2(syst) GeV/c2.Peer reviewe
Search for WW and WZ production in lepton plus jets final state at CDF
submitted to Phys. Rev. D (RC)We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in sqrt(s) = 1.96 TeV ppbar collisions at the Fermilab Tevatron, using data corresponding to 1.2 fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of sigma_{WW}* BR(W->lnu,W->jets)+ sigma_{WZ}*BR(W->lnu,Z->jets)We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in √s=1.96 TeV pp̅ collisions at the Fermilab Tevatron, using data corresponding to 1.2 fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of σWW×BR(W→ℓνℓ,W→jets)+σWZ×BR(W→ℓνℓ,Z→jets)<2.88 pb, which is consistent with the standard model next-to-leading-order cross section calculation for this decay channel of 2.09±0.12 pb.Peer reviewe
Search for Long-Lived Massive Charged Particles in 1.96 TeV \bar{p}p} Collisions
16 pages, 2 figures; Revision to fix PDF errors on some displays/printersWe performed a signature-based search for long-lived charged massive particles (CHAMPs) produced in 1.0 of collisions at TeV, collected with the CDF II detector using a high transverse-momentum () muon trigger. The search used time-of-flight to isolate slowly moving, high- particles. One event passed our selection cuts with an expected background of events. We set an upper bound on the production cross section, and, interpreting this result within the context of a stable scalar top quark model, set a lower limit on the particle mass of 249 GeV/ at 95% C.L.We performed a signature-based search for long-lived charged massive particles produced in 1.0 fb-1 of pp̅ collisions at √s=1.96 TeV, collected with the CDF II detector using a high transverse-momentum (pT) muon trigger. The search used time of flight to isolate slowly moving, high-pT particles. One event passed our selection cuts with an expected background of 1.9±0.2 events. We set an upper bound on the production cross section and, interpreting this result within the context of a stable scalar top-quark model, set a lower limit on the particle mass of 249 GeV/c2 at 95% C.L.Peer reviewe
- …