151 research outputs found
Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets
The HARP collaboration has presented measurements of the double-differential
pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800
MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin
nuclear targets. In many applications the extrapolation to long targets is
necessary. In this paper the analysis of data taken with long (one interaction
length) solid cylindrical targets made of carbon, tantalum and lead is
presented. The data were taken with the large acceptance HARP detector in the
T9 beam line of the CERN PS. The secondary pions were produced by beams of
protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and
identification of the produced particles were performed using a small-radius
cylindrical time projection chamber (TPC) placed inside a solenoidal magnet.
Incident protons were identified by an elaborate system of beam detectors.
Results are obtained for the double-differential yields per target nucleon d2
sigma / dp dtheta. The measurements are compared with predictions of the MARS
and GEANT4 Monte Carlo simulations.Comment: 43 pages, 20 figure
Measurement of the production cross-section of positive pions in the collision of 8.9 GeV/c protons on beryllium
The double-differential production cross-section of positive pions,
, measured in the HARP experiment is presented.
The incident particles are 8.9 GeV/c protons directed onto a beryllium target
with a nominal thickness of 5% of a nuclear interaction length. The measured
cross-section has a direct impact on the prediction of neutrino fluxes for the
MiniBooNE and SciBooNE experiments at Fermilab. After cuts, 13 million protons
on target produced about 96,000 reconstructed secondary tracks which were used
in this analysis. Cross-section results are presented in the kinematic range
0.75 GeV/c < < 6.5 GeV/c and 30 mrad < < 210 mrad in
the laboratory frame.Comment: 39 pages, 21 figures. Version accepted for publication by Eur. Phys.
J.
Absolute Momentum Calibration of the HARP TPC
In the HARP experiment the large-angle spectrometer is using a cylindrical
TPC as main tracking and particle identification detector. The momentum scale
of reconstructed tracks in the TPC is the most important systematic error for
the majority of kinematic bins used for the HARP measurements of the
double-differential production cross-section of charged pions in proton
interactions on nuclear targets at large angle. The HARP TPC operated with a
number of hardware shortfalls and operational mistakes. Thus it was important
to control and characterize its momentum calibration. While it was not possible
to enter a direct particle beam into the sensitive volume of the TPC to
calibrate the detector, a set of physical processes and detector properties
were exploited to achieve a precise calibration of the apparatus. In the
following we recall the main issues concerning the momentum measurement in the
HARP TPC, and describe the cross-checks made to validate the momentum scale. As
a conclusion, this analysis demonstrates that the measurement of momentum is
correct within the published precision of 3%.Comment: To be published by JINS
Forward production of charged pions with incident on nuclear targets measured at the CERN PS
Measurements of the double-differential production cross-section
in the range of momentum 0.5 \GeVc \leq p \le 8.0 \GeVc and angle 0.025 \rad
\leq \theta \le 0.25 \rad in interactions of charged pions on beryllium,
carbon, aluminium, copper, tin, tantalum and lead are presented. These data
represent the first experimental campaign to systematically measure forward
pion hadroproduction. The data were taken with the large acceptance HARP
detector in the T9 beam line of the CERN PS. Incident particles, impinging on a
5% nuclear interaction length target, were identified by an elaborate system of
beam detectors. The tracking and identification of the produced particles was
performed using the forward spectrometer of the HARP detector. Results are
obtained for the double-differential cross-sections mainly at four incident pion beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). The measurements are compared
with the GEANT4 and MARS Monte Carlo simulationComment: to be published on Nuclear Physics
The detection of neutrino interactions in the emulsion/lead target of the OPERA experiment
The OPERA neutrino detector in the underground Gran Sasso Laboratory (LNGS)
was designed to perform the first detection of neutrino oscillations in
appearance mode through the study of oscillations. The
apparatus consists of an emulsion/lead target complemented by electronic
detectors and it is placed in the high energy long-baseline CERN to LNGS beam
(CNGS) 730 km away from the neutrino source. Runs with CNGS neutrinos were
successfully carried out in 2007 and 2008 with the detector fully operational
with its related facilities for the emulsion handling and analysis. After a
brief description of the beam and of the experimental setup we report on the
collection, reconstruction and analysis procedures of first samples of neutrino
interaction events
- …