Excitonic fine structure and binding energies of excitonic complexes in single InAs quantum dashes

P.M., J.M. and G. S. acknowledge support from the grant of National Science Centre of Poland No. 2011/02/A/ST3/00152 (Maestro), whereas M.Z. acknowledges support from the Polish National Science Centre under grant No. 2015/18/E/ST3/005 (Sonata Bis). The experiments have partially been performed within the Wroclaw University of Science and Technology laboratory infrastructure financed by the Polish Ministry of Science and Higher Education Grant No. 6167/IA/119/2012.The fundamental electronic and optical properties of elongated InAs nanostructures embedded in quaternary InGaAlAs barrier are investigated by means of high-resolution optical spectroscopy and many-body atomistic tight-binding theory. These wire-like shaped self-assembled nanostructures are known as quantum dashes and are typically formed during the molecular beam epitaxial growth on InP substrates. In this work we study properties of excitonic complexes confined in quantum dashes emitting in a broad spectral range from below 1.2 to 1.55 μm. We find peculiar trends for the biexciton and negative trion binding energies, with pronounced trion binding in smaller size quantum dashes. These experimental findings are then compared and qualitatively explained by atomistic theory. The theoretical analysis shows a fundamental role of correlation effects for the absolute values of excitonic binding energies. Eventually, we determine the bright exciton fine structure splitting (FSS), where both the experiment and theory predict a broad distribution of the splitting varying from below 50 to almost 180 μeV. We identify several key factors determining the FSS values in such nanostructures including quantum dash size variation and composition fluctuations.PostprintPeer reviewe

Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --

Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereabouts and activities. The distributions of annual external doses estimated for each region overlap with each other, demonstrating that the personal external individual doses in locations where residence is currently allowed in Fukushima Prefecture and in Belarus are well within the range of estimated annual doses due to the background radiation level of other regions/countries

Dynamics of "binary" 197Au+197 Au collisions as a test of energy dissipation mechanism

197Au+197Au collisions at 15 MeV/nucleon were studied using the multidetector array CHIMERA and heavy ion beams from the superconducting cyclotron of LNS Catania. The experiment was aimed at studying the mechanism of energy dissipation in collisions of very heavy systems. In the present contribution we report on a part of our study concentrated on a subject of basically binary damped collisions, in which only two main fragments are formed prior to secondary deexcitation processes. Such “binary” events were selected by using complete information from the exclusive-type data (including all Z 3 fragments) obtained with the CHIMERA multidetector. Results are compared with predictions of a classical dynamical model of Błocki et al., in which both scenarios of energy dissipation, one-body or two-body dissipation mechanisms, are assumed

Isoscaling in neck fragmentation

Production of intermediate mass fragments (IMF) has been studied in semi-peripheral 124Sn (35AMeV) + 64Ni and 112Sn (35AMeV) + 58Ni reactions. Our recently proposed new method of an analysis of the neck- like fragmentation processes that provides information on the IMFs time equence and time scale is reviewed. Isotopic analysis of so characterized IMFs gives evidence for neutron enrichment of mid-velocity fragments. A clear isoscaling behavior is found despite the short emission time scale. Evolution of the isoscaling parameters from semi-peripheral to central collisions is discussed

Isospin effects studied with the CHIMERA detector at 35 Mev/nucleon

The yield of light charged particles and intermediate mass fragments is studied for the neutron-rich, 124Sn+64Ni, and neutron-poor, 112Sn+58Ni, reactions at 35MeV/nucleon as a function of the impact parameter. Our main observations are: (i) The yields of 1H, 3He and 4He particles in the neutron-poor system are enhanced with respect to the neutron-rich system and the yield of 3H is suppressed at all impact parameters, (ii) The ratio of 3H to 3He yield is three times larger for neutron poor system, (iii) The N/Z ratio of the emitted intermediate-mass fragments shows dependence on the isospin of the system, (iv) The neutron richness of detected intermediate mass fragments depends strongly on their rapidity. The gross features of the experimental data are reproduced by quantum molecular dynamics model calculations

Measurements of π+\pi^+, π−\pi^-, pp, pˉ\bar{p}, K+K^+ and K−K^- production in 120 GeV/cc p + C interactions

This paper presents multiplicity measurements of charged hadrons produced in 120 GeV/$c$ proton-carbon interactions. The measurements were made using data collected at the NA61/SHINE experiment during two different data-taking periods, with increased phase space coverage in the second configuration due to the addition of new subdetectors. Particle identification via $dE/dx$ was employed to obtain double-differential production multiplicities of $\pi^+$, $\pi^-$, $p$, $\bar{p}$, $K^+$ and $K^-$. These measurements are presented as a function of laboratory momentum in intervals of laboratory polar angle covering the range from 0 to 450 mrad. They provide crucial inputs for current and future long-baseline neutrino experiments, where they are used to estimate the initial neutrino flux

Investigation into the formation of the scrape-off layer density shoulder in JET ITER-like wall L-mode and H-mode plasmas

The low temperature boundary layer plasma (Scrape-Off-Layer or SOL) between the hot core and the surrounding vessel determines the level of power-loading, erosion and implantation of material surfaces, and thus the viability of tokamak-based fusion as an energy source. This study explores mechanisms affecting the formation of flattened density profiles, so-called ‘density shoulders’, in the low-field side (LFS) SOL, which modify ion and neutral fluxes to surfaces – and subsequent erosion. There is evidence against local enhancement of ionization inducing shoulder formation. We find that increases in SOL parallel resistivity, Λdiv (=[L||νei Ωi ]/cs Ωe), postulated to lead to shoulder growth through changes in SOL turbulence characteristics, correlates with increases in upstream SOL shoulder amplitude, As only under a subset of conditions (D2-fuelled L-mode density scans with outer strike point on the horizontal target). Λdiv fails to correlate with As for cases of N2 seeding or during sweeping of the strike point across the horizontal target. The limited correlation of Λdiv with As was also found for H-mode discharges. Thus, while Λdiv above a threshold of ~1 may be necessary for shoulder formation and/or growth, another shoulder mechanism is required. More significantly we find that in contrast to parallel resistivity, outer divertor recycling as quantified by the total outer divertor Balmer Dα emission, I-Dα, does scale with shoulder amplitude where Λdiv does and even where Λdiv fails. Divertor recycling could lead to SOL density shoulder formation through: a) reducing the parallel to the field flow (loss) of ions out of the SOL to the divertor; and b) changes in radial electric fields which lead to ExB poloidal flows as well as potentially affecting the SOL turbulence birth characteristics. Thus changes in divertor recycling may be the sole process in bringing about SOL density shoulders or in tandem with parallel resistivity

Neutral pathways and heat flux widths in vertical- and horizontal-target EDGE2D-EIRENE simulations of JET

This paper further analyses the EDGE2D-EIRENE simulations presented by Chankin et al (2017 Nucl. Mater. Energy 12 273), of L-mode JET plasmas in vertical-vertical (VV) and Vertical-horizontal (VH) divertor configurations. As expected, the simulated outer divertor ionisation source peaks near the separatrix in VV and radially further out in VH. We identify the reflections of recycled neutrals from lower divertor tiles as the primary mechanism by which ionisation is concentrated on the outer divertor separatrix in the VV configuration. These lower tile reflection pathways (of neutrals from the outer divertor, and to an even greater extent from the inner divertor) dominate the outer divertor separatrix ionisation. In contrast, the lower-tile-reflection pathways are much weaker in the VH simulation and its outer divertor ionisation is dominated by neutrals which do not reflect from any surfaces. Interestingly, these differences in neutral pathways give rise to strong differences in the heat flux density width λq at the outer divertor entrance: λq = 3.2 mm in VH compared to λq = 11.8 mm in VV. In VH, a narrow channel exists in the near scrape-off-layer (SOL) where the convected heat flux, driven by strong Er × B flow and thermoelectric current, dominates over the conducted heat flux. The width of this channel sets λq and is determined by the radial distance between the separatrix and the ionisation peak in the outer divertor

Observations and modelling of ion cyclotron emission observed in JET plasmas using a sub-harmonic arc detection system during ion cyclotron resonance heating

Peer reviewe