Human-Robot Team Interaction Through Wearable Haptics for Cooperative Manipulation

The interaction of robot teams and single human in teleoperation scenarios is beneficial in cooperative tasks, for example the manipulation of heavy and large objects in remote or dangerous environments. The main control challenge of the interaction is its asymmetry, arising because robot teams have a relatively high number of controllable degrees of freedom compared to the human operator. Therefore, we propose a control scheme that establishes the interaction on spaces of reduced dimensionality taking into account the low number of human command and feedback signals imposed by haptic devices. We evaluate the suitability of wearable haptic fingertip devices for multi-contact teleoperation in a user study. The results show that the proposed control approach is appropriate for human-robot team interaction and that the wearable haptic fingertip devices provide suitable assistance in cooperative manipulation tasks

Prevalence of haptic feedback in robot-mediated surgery : a systematic review of literature

© 2017 Springer-Verlag. This is a post-peer-review, pre-copyedit version of an article published in Journal of Robotic Surgery. The final authenticated version is available online at: https://doi.org/10.1007/s11701-017-0763-4With the successful uptake and inclusion of robotic systems in minimally invasive surgery and with the increasing application of robotic surgery (RS) in numerous surgical specialities worldwide, there is now a need to develop and enhance the technology further. One such improvement is the implementation and amalgamation of haptic feedback technology into RS which will permit the operating surgeon on the console to receive haptic information on the type of tissue being operated on. The main advantage of using this is to allow the operating surgeon to feel and control the amount of force applied to different tissues during surgery thus minimising the risk of tissue damage due to both the direct and indirect effects of excessive tissue force or tension being applied during RS. We performed a two-rater systematic review to identify the latest developments and potential avenues of improving technology in the application and implementation of haptic feedback technology to the operating surgeon on the console during RS. This review provides a summary of technological enhancements in RS, considering different stages of work, from proof of concept to cadaver tissue testing, surgery in animals, and finally real implementation in surgical practice. We identify that at the time of this review, while there is a unanimous agreement regarding need for haptic and tactile feedback, there are no solutions or products available that address this need. There is a scope and need for new developments in haptic augmentation for robot-mediated surgery with the aim of improving patient care and robotic surgical technology further.Peer reviewe

The classification and new trends of shared control strategies in telerobotic systems: A survey

Shared control, which permits a human operator and an autonomous controller to share the control of a telerobotic system, can reduce the operator's workload and/or improve performances during the execution of tasks. Due to the great benefits of combining the human intelligence with the higher power/precision abilities of robots, the shared control architecture occupies a wide spectrum among telerobotic systems. Although various shared control strategies have been proposed, a systematic overview to tease out the relation among different strategies is still absent. This survey, therefore, aims to provide a big picture for existing shared control strategies. To achieve this, we propose a categorization method and classify the shared control strategies into 3 categories: Semi-Autonomous control (SAC), State-Guidance Shared Control (SGSC), and State-Fusion Shared Control (SFSC), according to the different sharing ways between human operators and autonomous controllers. The typical scenarios in using each category are listed and the advantages/disadvantages and open issues of each category are discussed. Then, based on the overview of the existing strategies, new trends in shared control strategies, including the “autonomy from learning” and the “autonomy-levels adaptation,” are summarized and discussed

A Shared-Control Teleoperation Architecture for Nonprehensile Object Transportation

This article proposes a shared-control teleoperation architecture for robot manipulators transporting an object on a tray. Differently from many existing studies about remotely operated robots with firm grasping capabilities, we consider the case in which, in principle, the object can break its contact with the robot end-effector. The proposed shared-control approach automatically regulates the remote robot motion commanded by the user and the end-effector orientation to prevent the object from sliding over the tray. Furthermore, the human operator is provided with haptic cues informing about the discrepancy between the commanded and executed robot motion, which assist the operator throughout the task execution. We carried out trajectory tracking experiments employing an autonomous 7-degree-of-freedom (DoF) manipulator and compared the results obtained using the proposed approach with two different control schemes (i.e., constant tray orientation and no motion adjustment). We also carried out a human-subjects study involving 18 participants in which a 3-DoF haptic device was used to teleoperate the robot linear motion and display haptic cues to the operator. In all experiments, the results clearly show that our control approach outperforms the other solutions in terms of sliding prevention, robustness, commands tracking, and user’s preference

The Shape of Damping: Optimizing Damping Coefficients to Improve Transparency on Bilateral Telemanipulation

This thesis presents a novel optimization-based passivity control algorithm for hapticenabled bilateral teleoperation systems involving multiple degrees of freedom. In particular, in the context of energy-bounding control, the contribution focuses on the implementation of a passivity layer for an existing time-domain scheme, ensuring optimal transparency of the interaction along subsets of the environment space which are preponderant for the given task, while preserving the energy bounds required for passivity. The involved optimization problem is convex and amenable to real-time implementation. The effectiveness of the proposed design is validated via an experiment performed on a virtual teleoperated environment. The interplay between transparency and stability is a critical aspect in haptic-enabled bilateral teleoperation control. While it is important to present the user with the true impedance of the environment, destabilizing factors such as time delays, stiff environments, and a relaxed grasp on the master device may compromise the stability and safety of the system. Passivity has been exploited as one of the the main tools for providing sufficient conditions for stable teleoperation in several controller design approaches, such as the scattering algorithm, timedomain passivity control, energy bounding algorithm, and passive set position modulation. In this work it is presented an innovative energy-based approach, which builds upon existing time-domain passivity controllers, improving and extending their effectiveness and functionality. The set of damping coefficients are prioritized in each degree of freedom, the resulting transparency presents a realistic force feedback in comparison to the other directions. Thus, the prioritization takes effect using a quadratic programming algorithm to find the optimal values for the damping. Finally, the energy tanks approach on passivity control is a solution used to ensure stability in a system for robotics bilateral manipulation. The bilateral telemanipulation must maintain the principle of passivity in all moments to preserve the system\u2019s stability. This work presents a brief introduction to haptic devices as a master component on the telemanipulation chain; the end effector in the slave side is a representation of an interactive object within an environment having a force sensor as feedback signal. The whole interface is designed into a cross-platform framework named ROS, where the user interacts with the system. Experimental results are presented

Advanced teleoperation and control system for industrial robots based on augmented virtuality and haptic feedback

There are some industrial tasks that are still mainly performed manually by human workers due to their complexity, which is the case of surface treatment operations (such as sanding, deburring, finishing, grinding, polishing, etc.) used to repair defects. This work develops an advanced teleoperation and control system for industrial robots in order to assist the human operator to perform the mentioned tasks. On the one hand, the controlled robotic system provides strength and accuracy, holding the tool, keeping the right tool orientation and guaranteeing a smooth approach to the workpiece. On the other hand, the advanced teleoperation provides security and comfort to the user when performing the task. In particular, the proposed teleoperation uses augmented virtuality (i.e., a virtual world that includes non-modeled real-world data) and haptic feedback to provide the user an immersive virtual experience when remotely teleoperating the tool of the robot system to treat arbitrary regions of the workpiece surface. The method is illustrated with a car body surface treatment operation, although it can be easily extended to other surface treatment applications or even to other industrial tasks where the human operator may benefit from robotic assistance. The effectiveness of the proposed approach is shown with several experiments using a 6R robotic arm. Moreover, a comparison of the performance obtained manually by an expert and that obtained with the proposed method has also been conducted in order to show the suitability of the proposed approach

Dynamic virtual reality user interface for teleoperation of heterogeneous robot teams

This research investigates the possibility to improve current teleoperation control for heterogeneous robot teams using modern Human-Computer Interaction (HCI) techniques such as Virtual Reality. It proposes a dynamic teleoperation Virtual Reality User Interface (VRUI) framework to improve the current approach to teleoperating heterogeneous robot teams

Operator awareness in human–robot collaboration through wearable vibrotactile feedback

In industrial scenarios, requiring human–robot collaboration, the understanding between the human operator and his/her robot coworker is paramount. On the one side, the robot has to detect human intentions, and on the other side, the human needs to be aware of what is happening during the collaborative task. In this letter, we address the first issue by predicting human behavior through a new recursive Bayesian classifier, exploiting head, and hand tracking data. Human awareness is tackled by endowing the human with a vibrotactile ring that sends acknowledgments to the user during critical phases of the collaborative task. The proposed solution has been assessed in a human–robot collaboration scenario, and we found that adding haptic feedback is particularly helpful to improve the performance when the human–robot cooperation task is performed by nonskilled subjects. We believe that predicting operator's intention and equipping him/her with wearable interface, able to give information about the prediction reliability, are essential features to improve performance in a human–robot collaboration in industrial environments

Virtual Reality-Based Interface for Advanced Assisted Mobile Robot Teleoperation

[EN] This work proposes a new interface for the teleoperation of mobile robots based on virtual reality that allows a natural and intuitive interaction and cooperation between the human and the robot, which is useful for many situations, such as inspection tasks, the mapping of complex environments, etc. Contrary to previous works, the proposed interface does not seek the realism of the virtual environment but provides all the minimum necessary elements that allow the user to carry out the teleoperation task in a more natural and intuitive way. The teleoperation is carried out in such a way that the human user and the mobile robot cooperate in a synergistic way to properly accomplish the task: the user guides the robot through the environment in order to benefit from the intelligence and adaptability of the human, whereas the robot is able to automatically avoid collisions with the objects in the environment in order to benefit from its fast response. The latter is carried out using the well-known potential field-based navigation method. The efficacy of the proposed method is demonstrated through experimentation with the Turtlebot3 Burger mobile robot in both simulation and real-world scenarios. In addition, usability and presence questionnaires were also conducted with users of different ages and backgrounds to demonstrate the benefits of the proposed approach. In particular, the results of these questionnaires show that the proposed virtual reality based interface is intuitive, ergonomic and easy to use.This research was funded by the Spanish Government (Grant PID2020-117421RB-C21 funded byMCIN/AEI/10.13039/501100011033) and by the Generalitat Valenciana (Grant GV/2021/181).Solanes, JE.; Muñoz García, A.; Gracia Calandin, LI.; Tornero Montserrat, J. (2022). Virtual Reality-Based Interface for Advanced Assisted Mobile Robot Teleoperation. Applied Sciences. 12(12):1-22. https://doi.org/10.3390/app12126071122121