Linear and non-linear dynamic analyses of sandwich panels with face sheet-tocore debonding

А survey of recent developments in the dynamic analysis of sandwich panels with face sheet-to-core debonding is presented. The finite element method within the ABAQUSTM code is utilized. The emphasis is directed to the procedures used to elaborate linear and non-linear models and to predict dynamic response of the sandwich panels. Recently developed models are presented, which can be applied for structural health monitoring algorithms of real-scale sandwich panels. First, various popular theories of intact sandwich panels are briefly mentioned and a model is proposed to effectively analyse the modal dynamics of debonded and damaged (due to impact) sandwich panels. The influence of debonding size, form and location, and number of such damage on the modal characteristics of sandwich panels are shown. For nonlinear analysis, models based on implicit and explicit time integration schemes are presented and dynamic response gained with those models are discussed. Finally, questions related to debonding progression at the face sheet-core interface when dynamic loading continues with time are briefly highlighted

Effective and Efficient Non-Destructive Testing of Large and Complex Shaped Aircraft Structures

The main aim of the research described within this thesis is to develop methodologies that enhance the defect detection capabilities of nondestructive testing (NDT) for the aircraft industry. Modem aircraft non-destructive testing requires the detection of small defects in large complex shaped components. Research has therefore focused on the limitations of ultrasonic, radioscopic and shearographic methods and the complimentary aspects associated with each method. The work has identified many parameters that have significant effect on successful defect detection and has developed methods for assessing NDT systems capabilities by noise analysis, excitation performance and error contributions attributed to the positioning of sensors. The work has resulted in 1. The demonstration that positional accuracy when ultrasonic testing has a significant effect on defect detection and a method to measure positional accuracy by evaluating the compensation required in a ten axis scanning system has revealed limitsio the achievable defect detection when using complex geometry scanning systems. 2. A method to reliably detect 15 micron voids in a diffusion bonded joint at ultrasonic frequencies of 20 MHz and above by optimising transducer excitation, focussing and normalisation. 3. A method of determining the minimum detectable ultrasonic attenuation variation by plotting the measuring error when calibrating the alignment of a ten axis scanning system. 4. A new formula for the calculation of the optimum magnification for digital radiography. The formula is applicable for focal spot sizes less than 0.1 mm. 5. A practical method of measuring the detection capabilities of a digital radiographic system by calculating the modulation transfer function and the noise power spectrum from a reference image. 6. The practical application of digital radiography to the inspection of super plastically formed ditThsion bonded titanium (SPFDB) and carbon fibre composite structure has been demonstrated but has also been supported by quantitative measurement of the imaging systems capabilities. 7. A method of integrating all the modules of the shearography system that provides significant improvement in the minimum defect detection capability for which a patent has been granted. 8. The matching of the applied stress to the data capture and processing during a shearographic inspection which again contributes significantly to the defect detection capability. 9. The testing and validation of the Parker and Salter [1999] temporal unwrapping and laser illumination work has led to the realisation that producing a pressure drop that would result in a linear change in surface deformation over time is difficult to achieve. 10. The defect detection capabilities achievable by thermal stressing during a shearographic inspection have been discovered by applying the pressure drop algorithms to a thermally stressed part. 11. The minimum surface displacement measurable by a shearography system and therefore the defect detection capabilities can be determined by analysing the signal to noise ratio of a transition from a black (poor reflecting surface) to white (good reflecting surface). The quantisation range for the signal to noise ratio is then used in the Hung [1982] formula to calculate the minimum displacement. Many of the research aspects contained within this thesis are cuffently being implemented within the production inspection process at BAE Samlesbury

Recognition of Activities of Daily Living with Egocentric Vision: A Review.

Video-based recognition of activities of daily living (ADLs) is being used in ambient assisted living systems in order to support the independent living of older people. However, current systems based on cameras located in the environment present a number of problems, such as occlusions and a limited field of view. Recently, wearable cameras have begun to be exploited. This paper presents a review of the state of the art of egocentric vision systems for the recognition of ADLs following a hierarchical structure: motion, action and activity levels, where each level provides higher semantic information and involves a longer time frame. The current egocentric vision literature suggests that ADLs recognition is mainly driven by the objects present in the scene, especially those associated with specific tasks. However, although object-based approaches have proven popular, object recognition remains a challenge due to the intra-class variations found in unconstrained scenarios. As a consequence, the performance of current systems is far from satisfactory

Infrared thermography and NDT : 2050 horizon

Society is changing fast, new technologies and materials have been developed which require new inspection approaches. Infrared thermography (IRT) has emerged in the recent years as an attractive and reliable technique to address complex non-destructive testing (NDT) problems. Companies are now providing turn-key IRT-NDT systems, but the question we ask now is ‘What is next?’. Even though the future is elusive, we can consider the possible future developments in IR NDT. Our analysis shows that new developments will take place in various areas such as: acquisition, stimulation, processing and obviously an always enlarging range of applications with new materials which will have particular inspection requirements. This paper presents the various developments in the field of IRT which have evolved to lead to the current situation, and then examines the potential future trend in IRT-NDT

Capacitive imaging technique for non-destructive evaluation (NDE)

This thesis describes the development and characterization of a novel NDE methodthe Capacitive Imaging (CI) technique. The CI technique employs a pair of (or multiple) electrodes to form a co-planar capacitor, and uses the fringing quasi-static electric field established across the electrodes to investigate specimens of interest. In general, the CI probe is sensitive to surface and hidden defects in insulating materials, and surface features on conducting materials. The CI technique is advantageous for its non-contact and non-invasive nature, and the capacitive coupling allows the CI technique to work on a wide variety of material properties. The theoretical background to the CI technique has been developed. It is shown that in the frequency range of operation (10 kHz to 1 MHz), the quasi-static approximation is valid and the Maxwell’s Equations describing the general electromagnetic phenomena can be simplified. The practical implementation of the CI system is based on this analysis, and it is shown that the CI technique has features that can complement techniques such as eddy current methods that are already established in NDE. The design principles of the CI probes that are required for an optimum imaging performance have been determined, by considering the key measures of the performance including the depth of penetration, the measurement sensitivity, the imaging resolution and the signal to noise ratio (SNR). It has been shown that the operation frequency is not an influential factor - the performance of the CI probe is determined primarily by the geometry of the probe (e.g. size/shape of the electrodes, separation between electrodes, guard electrodes etc.). Symmetric CI probes with triangular-shaped electrodes were identified as a good general purpose design. Finite Element (FE) models were constructed both in 2D and 3D in COMSOLTM to predict the electric field distributions from CI probes. Effects of thickness of specimen, liftoff distance and relative permittivity value etc were examined using the 2D models. The sensitivity distributions of different CI probes were obtained from the 3D models and were used to characterize the imaging ability of the given CI probes. The fundamental concepts of the CI technique have been experimentally validated in a series of scans where the defects were successfully imaged in insulating (Perspex) and conducting (e.g. Aluminium, Steel and carbon fibre composite) specimens. The detection of corrosion under insulation (CUI) has also been demonstrated. The imaging abilities were assessed by investigating various standard specimens under different situations. The CI technique was then successfully applied to various practical specimens, including glass fibre laminated composites and sandwich structures, laminated carbon fibre composites, corroded steel plate and pipe, and concrete specimens. Further measurements were also conducted using modified CI probes, to demonstrate the wide range of applications of the CI technique

Planck pre-launch status: The optical system

Planck is a scientific satellite that represents the next milestone in space-based research related to the cosmic microwave background, and in many other astrophysical fields. Planck was launched on 14 May of 2009 and is now operational. The uncertainty in the optical response of its detectors is a key factor allowing Planck to achieve its scientific objectives. More than a decade of analysis and measurements have gone into achieving the required performances. In this paper, we describe the main aspects of the Planck optics that are relevant to science, and the estimated in-flight performance, based on the knowledge available at the time of launch. We also briefly describe the impact of the major systematic effects of optical origin, and the concept of in-flight optical calibration. Detailed discussions of related areas are provided in accompanying papers

Effective and efficient non-destructive testing of large and complex shaped aircraft structures

The main aim of the research described within this thesis is to develop methodologies that enhance the defect detection capabilities of nondestructive testing (NDT) for the aircraft industry. Modem aircraft non-destructive testing requires the detection of small defects in large complex shaped components. Research has therefore focused on the limitations of ultrasonic, radioscopic and shearographic methods and the complimentary aspects associated with each method. The work has identified many parameters that have significant effect on successful defect detection and has developed methods for assessing NDT systems capabilities by noise analysis, excitation performance and error contributions attributed to the positioning of sensors. The work has resulted in 1. The demonstration that positional accuracy when ultrasonic testing has a significant effect on defect detection and a method to measure positional accuracy by evaluating the compensation required in a ten axis scanning system has revealed limitsio the achievable defect detection when using complex geometry scanning systems. 2. A method to reliably detect 15 micron voids in a diffusion bonded joint at ultrasonic frequencies of 20 MHz and above by optimising transducer excitation, focussing and normalisation. 3. A method of determining the minimum detectable ultrasonic attenuation variation by plotting the measuring error when calibrating the alignment of a ten axis scanning system. 4. A new formula for the calculation of the optimum magnification for digital radiography. The formula is applicable for focal spot sizes less than 0.1 mm. 5. A practical method of measuring the detection capabilities of a digital radiographic system by calculating the modulation transfer function and the noise power spectrum from a reference image. 6. The practical application of digital radiography to the inspection of super plastically formed ditThsion bonded titanium (SPFDB) and carbon fibre composite structure has been demonstrated but has also been supported by quantitative measurement of the imaging systems capabilities. 7. A method of integrating all the modules of the shearography system that provides significant improvement in the minimum defect detection capability for which a patent has been granted. 8. The matching of the applied stress to the data capture and processing during a shearographic inspection which again contributes significantly to the defect detection capability. 9. The testing and validation of the Parker and Salter [1999] temporal unwrapping and laser illumination work has led to the realisation that producing a pressure drop that would result in a linear change in surface deformation over time is difficult to achieve. 10. The defect detection capabilities achievable by thermal stressing during a shearographic inspection have been discovered by applying the pressure drop algorithms to a thermally stressed part. 11. The minimum surface displacement measurable by a shearography system and therefore the defect detection capabilities can be determined by analysing the signal to noise ratio of a transition from a black (poor reflecting surface) to white (good reflecting surface). The quantisation range for the signal to noise ratio is then used in the Hung [1982] formula to calculate the minimum displacement. Many of the research aspects contained within this thesis are cuffently being implemented within the production inspection process at BAE Samlesbury.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Nanostructured metallic surfaces of Au implemented as electrochemical glucose sensors

Diabetes is one of the most prevalent chronic diseases growing globally with 450 million people currently being diagnosed with the disease. With this number dramatically increasing every year the need for highly sensitive and selective glucose sensors are of great importance. Along with this, the comfort of the patient when analysing their glucose concentrations has come to the forefront of research with the push towards non-invasive sensing devices becoming the major focus in this research. The aim of this research was to develop Au-based nanostructures and study their effectiveness in detecting ultra-low concentrations (<100 µM) of glucose. Au has shown excellent biocompatibility as well as its ability to be moulded for shape, size and density which can be tailored specifically to get enhanced glucose electrooxidation. Following a thorough literature review, the materials that were developed and investigated were pure mono-metallic Au structures, Au Pt alloy and Au Ni particles as well as Au Co3O4 composites. Initially, a pure nanostructure of Au was studied in the form of Au nanospikes where the impact of HAuCl4 concentration, Pb acetate concentration (growth agent for shape), electrodeposition time and electrodeposition potential were studied. From these studies the optimal conditions to produce Au nanospikes for optimal glucose sensing were found to have a HAuCl4 concentration of 13.6 mM, a Pb acetate concentration of 1 mM, an electrodeposition time of 12 mins and an applied electrodeposition potential of +0.05 V. Analysis of this optimal pure Au sensor was performed with calculated sensitivity of 91.8 µA·mM-1·cm-2 with no interference from common physiological contaminants making this sensor sensitive and highly selective. Further study of the Au-based sensors pushed the study to use Au in conjunction with Pt in an alloyed form. Using the hydrogen bubble template technique with varying concentrations of Pt were used to form a sensor with a very large electrochemical surface area (ECSA). In this study various concentrations of Pt were added to the electrodeposition solution with 0.5 mM of Pt showing the largest overall surface area and the highest sensitivity in the presence of glucose. Electrochemical glucose sensing analysis was performed on the Au-Pt alloyed sensor producing a high sensitivity of 109.3 µA·mM-1·cm-2 showing the alloyed material produced a higher sensitivity than that of the monometallic Au sensor. With the addition of Pt, a higher sensitivity was obtained whist the large presence of Au allowed for the sensor to have excellent selectivity in the presence of common physiological contaminants which has previously hindered the use of Pt in glucose sensing nanostructures. To reduce Au content yet increase sensitivity, highly active Au nanoparticles on a Ni platform were employed. It is well known that Au nanoparticles grown by galvanic replacement are highly active however a uniform formation is a major challenge due to the mechanism by which a galvanic replacement reaction occurs. From this knowledge, Ni colloidal crystals were employed to attempt to overcome this issue. Multiple concentrations of Au were used to determine the optimal concentration of Au which was found to be 0.1 mM of HAuCl4. Analysis of this formed sensor was performed and a very large sensitivity of 506 µA·mM-1·cm-2 showing a much larger enhancement of sensitivity compared to both the pure Au and Au-Pt alloyed sensors. The Ni-Au colloidal sensor showed minimal effect from common physiological contaminants due to the presence of Au in the structure. Finally, a study of the effect of an additional material was studied in the presence of the metal oxide Co3O4 due to its excellent biocompatibility and excellent sensitivity in the presence of glucose. The hydrogen bubble templated technique was used to form a pure Au lattice structure which was then coated in pure Co3O4 nanowires using the hydrothermal technique. The formed structure had a completely cohesive structure where Co3O4 moulded over the Au allowing for synchronized sensing between the Au and Co3O4 components to occur. The electrochemical sensing analysis of the Au-Co3O4 structure showed a huge sensitivity of 2014 µA·mM-1·cm-2 within the glucose concentration range between 0.02 and 1 mM. This large sensitivity in the low region of glucose concentrations showed the possibility of the sensor performing successfully within the glucose concentration range of saliva (20 ¿ 1000 µM). Further analysis of the sensor was performed in the presence of synthetic saliva showing an excellent linearity of glucose additions and minimal to no effect from common physiological contaminants found in saliva. These findings showed the feasibility of the developed electrochemical glucose sensor to be employed for non-invasive diabetes monitoring and diagnostic applications

Objective localisation of oral mucosal lesions using optical coherence tomography.

PhDIdentification of the most representative location for biopsy is critical in establishing the definitive diagnosis of oral mucosal lesions. Currently, this process involves visual evaluation of the colour characteristics of tissue aided by topical application of contrast enhancing agents. Although, this approach is widely practiced, it remains limited by its lack of objectivity in identifying and delineating suspicious areas for biopsy. To overcome this drawback there is a need to introduce a technique that would provide macroscopic guidance based on microscopic imaging and analysis. Optical Coherence Tomography is an emerging high resolution biomedical imaging modality that can potentially be used as an in vivo tool for selection of the most appropriate site for biopsy. This thesis investigates the use of OCT for qualitative and quantitative mapping of oral mucosal lesions. Feasibility studies were performed on patient biopsy samples prior to histopathological processing using a commercial OCT microscope. Qualitative imaging results examining a variety of normal, benign, inflammatory and premalignant lesions of the oral mucosa will be presented. Furthermore, the identification and utilisation of a common quantifiable parameter in OCT and histology of images of normal and dysplastic oral epithelium will be explored thus ensuring objective and reproducible mapping of the progression of oral carcinogenesis. Finally, the selection of the most representative biopsy site of oral epithelial dysplasia would be investigated using a novel approach, scattering attenuation microscopy. It is hoped this approach may help convey more clinical meaning than the conventional visualisation of OCT images