Managing Bandwidth and Traffic via Bundling and Filtration in Large-Scale Distributed Simulations

Research has shown that bandwidth can be a limiting factor in the performance of distributed simulations. The Air Force\u27s Distributed Mission Operations Center (DMOC) periodically hosts one of the largest distributed simulation events in the world. The engineers at the DMOC have dealt with the difficult problem of limited bandwidth by implementing application level filters that process all DIS PDUs between the various networks connected to the exercise. This thesis examines their implemented filter and proposes: adaptive range-based filtering and bundling together of PDUs. The goals are to reduce the number of PDUs passed by the adaptive filter and to reduce network overhead and the total amount of data transferred by maximizing packet size up to the MTU. The proposed changes were implemented and logged data from previous events were used on a test network in order to measure the improvement from the base filter to the improved filter. The results showed that the adaptive range based filter was effective, though minimally so, and that the PDU bundling resulted in a reduction of 17% to 20% of the total traffic transmitted across the network

Locality Enhancement and Dynamic Optimizations on Multi-Core and GPU

Enhancing the match between software executions and hardware features is key to computing efficiency. The match is a continuously evolving and challenging problem. This dissertation focuses on the development of programming system support for exploiting two key features of modern hardware development: the massive parallelism of emerging computational accelerators such as Graphic Processing Units (GPU), and the non-uniformity of cache sharing in modern multicore processors. They are respectively driven by the important role of accelerators in today\u27s general-purpose computing and the ultimate importance of memory performance. This dissertation particularly concentrates on optimizing control flows and memory references, at both compilation and execution time, to tap into the full potential of pure software solutions in taking advantage of the two key hardware features.;Conditional branches cause divergences in program control flows, which may result in serious performance degradation on massively data-parallel GPU architectures with Single Instruction Multiple Data (SIMD) parallelism. On such an architecture, control divergence may force computing units to stay idle for a substantial time, throttling system throughput by orders of magnitude. This dissertation provides an extensive exploration of the solution to this problem and presents program level transformations based upon two fundamental techniques --- thread relocation and data relocation. These two optimizations provide fundamental support for swapping jobs among threads so that the control flow paths of threads converge within every SIMD thread group.;In memory performance, this dissertation concentrates on two aspects: the influence of nonuniform sharing on multithreading applications, and the optimization of irregular memory references on GPUs. In shared cache multicore chips, interactions among threads are complicated due to the interplay of cache contention and synergistic prefetching. This dissertation presents the first systematic study on the influence of non-uniform shared cache on contemporary parallel programs, reveals the mismatch between the software development and underlying cache sharing hierarchies, and further demonstrates it by proposing and applying cache-sharing-aware data transformations that bring significant performance improvement. For the second aspect, the efficiency of GPU accelerators is sensitive to irregular memory references, which refer to the memory references whose access patterns remain unknown until execution time (e.g., A[P[i]]). The root causes of the irregular memory reference problem are similar to that of the control flow problem, while in a more general and complex form. I developed a framework, named G-Streamline, as a unified software solution to dynamic irregularities in GPU computing. It treats both types of irregularities at the same time in a holistic fashion, maximizing the whole-program performance by resolving conflicts among optimizations

Simulator adaptation at runtime for component-based simulation software

Component-based simulation software can provide many opportunities to compose and configure simulators, resulting in an algorithm selection problem for the user of this software. This thesis aims to automate the selection and adaptation of simulators at runtime in an application-independent manner. Further, it explores the potential of tailored and approximate simulators - in this thesis concretely developed for the modeling language ML-Rules - supporting the effectiveness of the adaptation scheme.Komponenten-basierte Simulationssoftware kann viele Möglichkeiten zur Komposition und Konfiguration von Simulatoren bieten und damit zu einem Konfigurationsproblem für Nutzer dieser Software führen. Das Ziel dieser Arbeit ist die Entwicklung einer generischen und automatisierten Auswahl- und Adaptionsmethode für Simulatoren. Darüber hinaus wird das Potential von spezifischen und approximativen Simulatoren anhand der Modellierungssprache ML-Rules untersucht, welche die Effektivität des entwickelten Adaptionsmechanismus erhöhen können

Automatic Algorithm Selection for Complex Simulation Problems

To select the most suitable simulation algorithm for a given task is often difficult. This is due to intricate interactions between model features, implementation details, and runtime environment, which may strongly affect the overall performance. The thesis consists of three parts. The first part surveys existing approaches to solve the algorithm selection problem and discusses techniques to analyze simulation algorithm performance.The second part introduces a software framework for automatic simulation algorithm selection, which is evaluated in the third part.Die Auswahl des passendsten Simulationsalgorithmus für eine bestimmte Aufgabe ist oftmals schwierig. Dies liegt an der komplexen Interaktion zwischen Modelleigenschaften, Implementierungsdetails und Laufzeitumgebung. Die Arbeit ist in drei Teile gegliedert. Der erste Teil befasst sich eingehend mit Vorarbeiten zur automatischen Algorithmenauswahl, sowie mit der Leistungsanalyse von Simulationsalgorithmen. Der zweite Teil der Arbeit stellt ein Rahmenwerk zur automatischen Auswahl von Simulationsalgorithmen vor, welches dann im dritten Teil evaluiert wird

Characterization, Avoidance and Repair of Packet Collisions in Inter-Vehicle Communication Networks

This work proposes a combined and accurate simulation of wireless channel, physical layer and networking aspects in order to bridge the gaps between the corresponding research communities. The resulting high fidelity simulations enable performance optimizations across multiple layers, and are used in the second part of this thesis to evaluate the impact of fast-fading channel characteristics on Carrier-Sense Multiple Access, and to quantify the benefit of successive interference cancellation

Characterization, Avoidance and Repair of Packet Collisions in Inter-Vehicle Communication Networks

This work proposes a combined and accurate simulation of wireless channel, physical layer and networking aspects in order to bridge the gaps between the corresponding research communities. The resulting high fidelity simulations enable performance optimizations across multiple layers, and are used in the second part of this thesis to evaluate the impact of fast-fading channel characteristics on Carrier-Sense Multiple Access, and to quantify the benefit of successive interference cancellation

Heterogeneous Acceleration for 5G New Radio Channel Modelling Using FPGAs and GPUs

L'abstract è presente nell'allegato / the abstract is in the attachmen

Towards Scalable Design of Future Wireless Networks

Wireless operators face an ever-growing challenge to meet the throughput and processing requirements of billions of devices that are getting connected. In current wireless networks, such as LTE and WiFi, these requirements are addressed by provisioning more resources: spectrum, transmitters, and baseband processors. However, this simple add-on approach to scale system performance is expensive and often results in resource underutilization. What are, then, the ways to efficiently scale the throughput and operational efficiency of these wireless networks? To answer this question, this thesis explores several potential designs: utilizing unlicensed spectrum to augment the bandwidth of a licensed network; coordinating transmitters to increase system throughput; and finally, centralizing wireless processing to reduce computing costs. First, we propose a solution that allows LTE, a licensed wireless standard, to co-exist with WiFi in the unlicensed spectrum. The proposed solution bridges the incompatibility between the fixed access of LTE, and the random access of WiFi, through channel reservation. It achieves a fair LTE-WiFi co-existence despite the transmission gaps and unequal frame durations. Second, we consider a system where different MIMO transmitters coordinate to transmit data of multiple users. We present an adaptive design of the channel feedback protocol that mitigates interference resulting from the imperfect channel information. Finally, we consider a Cloud-RAN architecture where a datacenter or a cloud resource processes wireless frames. We introduce a tree-based design for real-time transport of baseband samples and provide its end-to-end schedulability and capacity analysis. We also present a processing framework that combines real-time scheduling with fine-grained parallelism. The framework reduces processing times by migrating parallelizable tasks to idle compute resources, and thus, decreases the processing deadline-misses at no additional cost. We implement and evaluate the above solutions using software-radio platforms and off-the-shelf radios, and confirm their applicability in real-world settings.PhDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/133358/1/gkchai_1.pd

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture.Postprint (published version