Application of repeat-pass TerraSAR-X staring spotlight interferometric coherence to monitor pasture biophysical parameters: limitations and sensitivity analysis

This paper describes the potential and limitations of repeat-pass synthetic aperture radar interferometry (InSAR) to retrieve the biophysical parameters of intensively managed pastures. We used a time series of eight acquisitions from the TerraSAR-X Staring Spotlight (TSX-ST) mode. The ST mode is different from conventional Stripmap mode; therefore, we adjusted the Doppler phase correction for interferometric processing. We analyzed the three interferometric pairs with an 11-day temporal baseline, and among these three pairs found only one gives a high coherence. The results show that the high coherence in different paddocks is due to the cutting of the grass in the month of June, however the temporal decorrelation in other paddocks is mainly due to the grass growth and high sensitivity of the X-band SAR signals to the vegetation cover. The InSAR coherence (over coherent paddocks) shows a good correlation with SAR backscatter (R2dB=0.65, p<0.05) and grassland biophysical parameters (R2Height=0.55, p<0.05, R2Biomass=0.75,p<0.05). It is thus possible to detect different management practices (e.g., grazing, mowing/cutting) using SAR backscatter (dB) and coherence information from high spatial short baseline X-band imagery; however, the rate of decorrelation over vegetated areas is high. Initial findings from the June pair show the possibility of change detection due to the grass growth, grazing, and mowing events by using InSAR coherence information. However, it is not possible to automatically categorize different paddocks undergoing these changes based only on the SAR backscatter and coherence values, due to the ambiguity caused by tall grass flattened by the wind

Synergetic use of Sentinel-1 and Sentinel-2 for assessments of heathland conservation status

Habitat quality assessments often demand wall‐to‐wall information about the state of vegetation. Remote sensing can provide this information by capturing optical and structural attributes of plant communities. Although active and passive remote sensing approaches are considered as complementary techniques, they have been rarely combined for conservation mapping. Here, we combined spaceborne multispectral Sentinel‐2 and Sentinel‐1 SAR data for a remote sensing‐based habitat quality assessment of dwarf shrub heathland, which was inspired by nature conservation field guidelines. Therefore, three earlier proposed quality layers representing (1) the coverage of the key dwarf shrub species, (2) stand structural diversity and (3) an index reflecting co‐occurring vegetation were mapped via linking in situ data and remote sensing imagery. These layers were combined in an RGB‐representation depicting varying stand attributes, which afterwards allowed for a rule‐based derivation of pixel‐wise habitat quality classes. The links between field observations and remote sensing data reached correlations between 0.70 and 0.94 for modeling the single quality layers. The spatial patterns shown in the quality layers and the map of discrete quality classes were in line with the field observations. The remote sensing‐based mapping of heathland conservation status showed an overall agreement of 76% with field data. Transferring the approach in time (applying a second set of Sentinel‐1 and ‐2 data) caused a decrease in accuracy to 73%. Our findings suggest that Sentinel‐1 SAR contains information about vegetation structure that is complimentary to optical data and therefore relevant for nature conservation. While we think that rule‐based approaches for quality assessments offer the possibility for gaining acceptance in both communities applied conservation and remote sensing, there is still need for developing more robust and transferable methods

Monitoring and prediction of pasture quality and productivity using planet scope satellite data for sustainable livestock production systems in Colombia

As the population increases, demand for food increases too, which has led to large-scale land conversion to improve livestock production in Colombia. Fulfilling these criteria of increasing demand in a sustainable way is a challenge and remote sensing data provides an accurate method to support this task. In this study, Planet Scope multispectral satellite datasets and coincident field measurements acquired over test fields in the study area (Patía) of September 2018 was used. Fresh and dry weight biomass was calculated and forage quality analyses, crude protein (CP), in vitro dry matter digestibility (IVDMD), Ash and standing biomass dry weight (DM) was carried out in the forage nutritional quality laboratory of International Centre for Tropical Agriculture (CIAT). Field data was related to the remote sensing data using the random forest regression algorithm. R was required for the statistical analysis, to figure out the model performance for IVDMD, CP, Ash and DM. This project also investigated the spatial distribution of livestock which is affected by quality and area of potential forage zones. The R2 values of the regression models were 0.74 for IVDMD, 0.69 for CP, 0.38 for Ash and 0.49 for DM using a predictor combination of vegetation indices, simple ratios and bands

Multiseasonal Remote Sensing of Vegetation with One-Class Classification – Possibilities and Limitations in Detecting Habitats of Nature Conservation Value

Mapping of habitats relevant for nature conservation often involves the identification of patches of target habitats in a complex mosaic of vegetation types extraneous for conservation planning. In field surveys, this is often a time-consuming and work-intensive task. Limiting the necessary ground reference to a small sample of target habitats and combining it with area-wide remote sensing data could greatly reduce and therefore support the field mapping effort. Conventional supervised classification methods need to be trained with a representative set of samples covering an exhaustive set of all classes. Acquiring such data is work intensive and hence inefficient in cases where only one or few classes are of interest. The usage of one-class classifiers (OCC) seems to be more suitable for this task – but has up until now neither been tested nor applied for large scale mapping and monitoring in programs such as those requested for the Natura 2000 European Habitat Directive or the High Nature Value (HNV) farmland Indicator. It is important to uncover the possibilities and mark the obstacles of this new approach since the usage of remote sensing for conservation purposes is currently controversially discussed in the ecology community as well as in the remote sensing community. Thus, the focal and innovative point of this thesis is to explore possibilities and limitations in the application of one-class classifiers for detecting habitats of nature conservation value with the help of multi-seasonal remote sensing and limited field data. The first study ascertains the usage of an OCC is suitable for mapping Natura 2000 habitat types. Applying the Maxent algorithm in combination with a low number of ground reference points of four habitat types and easily available multi-seasonal satellite imagery resulted in a combined habitat map with reasonable accuracy. There is potential in one-class classification for detecting rare habitats – however, differentiating habitats with very similar species composition remains challenging. Motivated by these positive results, the topic of the second study of this thesis is whether low and HNV grasslands can be differentiated with remotely-sensed reflectance data, field data and one-class classification. This approach could supplement existing field survey-based monitoring approaches such as for the HNV farmland Indicator. Three one-class classifiers together with multi-seasonal, multispectral remote sensing data in combination with sparse field data were analysed for their usage A) to classify HNV grassland against other areas and B) to differentiate between three quality classes of HNV grassland according to the current German HNV monitoring approach. Results indicated reasonable performances of the OCC to identify HNV grassland areas, but clearly showed that a separation into several HNV quality classes is not possible. In the third study the robustness and weak spots of an OCC were tested considering the effect of landscape composition and sample size on accuracy measurements. For this purpose artificial landscapes were generated to avoid the common problem of case-studies which usually can only make locally valid statements on the suitability of a tested approach. Whereas results concerning target sample size and the amount of similar classes in the background confirm conclusions of earlier studies from the field of species distribution modelling, results for background sample size and prevalence of target class give new insights and a basis for further studies and discussions. In conclusion the utilisation of an OCC together with reflectance and sparse field data for addressing rare vegetation types of conservation interest proves to be useful and has to be recommended for further research

Calibration of DART Radiative Transfer Model with Satellite Images for Simulating Albedo and Thermal Irradiance Images and 3D Radiative Budget of Urban Environment

Remote sensing is increasingly used for managing urban environment. In this context, the H2020 project URBANFLUXES aims to improve our knowledge on urban anthropogenic heat fluxes, with the specific study of three cities: London, Basel and Heraklion. Usually, one expects to derive directly 2 major urban parameters from remote sensing: the albedo and thermal irradiance. However, the determination of these two parameters is seriously hampered by complexity of urban architecture. For example, urban reflectance and brightness temperature are far from isotropic and are spatially heterogeneous. Hence, radiative transfer models that consider the complexity of urban architecture when simulating remote sensing signals are essential tools. Even for these sophisticated models, there is a major constraint for an operational use of remote sensing: the complex 3D distribution of optical properties and temperatures in urban environments. Here, the work is conducted with the DART (Discrete Anisotropic Radiative Transfer) model. It is a comprehensive physically based 3D radiative transfer model that simulates optical signals at the entrance of imaging spectro-radiometers and LiDAR scanners on board of satellites and airplanes, as well as the 3D radiative budget, of urban and natural landscapes for any experimental (atmosphere, topography,…) and instrumental (sensor altitude, spatial resolution, UV to thermal infrared,…) configuration. Paul Sabatier University distributes free licenses for research activities. This paper presents the calibration of DART model with high spatial resolution satellite images (Landsat 8, Sentinel 2, etc.) that are acquired in the visible (VIS) / near infrared (NIR) domain and in the thermal infrared (TIR) domain. Here, the work is conducted with an atmospherically corrected Landsat 8 image and Bale city, with its urban database. The calibration approach in the VIS/IR domain encompasses 5 steps for computing the 2D distribution (image) of urban albedo at satellite spatial resolution. (1) DART simulation of satellite image at very high spatial resolution (e.g., 50cm) per satellite spectral band. Atmosphere conditions are specific to the satellite image acquisition. (2) Spatial resampling of DART image at the coarser spatial resolution of the available satellite image, per spectral band. (3) Iterative derivation of the urban surfaces (roofs, walls, streets, vegetation,…) optical properties as derived from pixel-wise comparison of DART and satellite images, independently per spectral band. (4) Computation of the band albedo image of the city, per spectral band. (5) Computation of the image of the city albedo and VIS/NIR exitance, as an integral over all satellite spectral bands. In order to get a time series of albedo and VIS/NIR exitance, even in the absence of satellite images, ECMWF information about local irradiance and atmosphere conditions are used. A similar approach is used for calculating the city thermal exitance using satellite images acquired in the thermal infrared domain. Finally, DART simulations that are conducted with the optical properties derived from remote sensing images give also the 3D radiative budget of the city at any date including the date of the satellite image acquisition

Remote sensing methods for biodiversity monitoring with emphasis on vegetation height estimation and habitat classification

Biodiversity is a principal factor for ecosystem stability and functioning, and the need for its protection has been identified as imperative globally. Remote sensing can contribute to timely and accurate monitoring of various elements related to biodiversity, but knowledge gap with user communities hinders its widespread operational use. This study advances biodiversity monitoring through earth observation data by initially identifying, reviewing, and proposing state-of-the-art remote sensing methods which can be used for the extraction of a number of widely adopted indicators of global biodiversity assessment. Then, a cost and resource effective approach is proposed for vegetation height estimation, using satellite imagery from very high resolution passive sensors. A number of texture features are extracted, based on local variance, entropy, and local binary patterns, and processed through several data processing, dimensionality reduction, and classification techniques. The approach manages to discriminate six vegetation height categories, useful for ecological studies, with accuracies over 90%. Thus, it offers an effective approach for landscape analysis, and habitat and land use monitoring, extending previous approaches as far as the range of height and vegetation species, synergies of multi-date imagery, data processing, and resource economy are regarded. Finally, two approaches are introduced to advance the state of the art in habitat classification using remote sensing data and pre-existing land cover information. The first proposes a methodology to express land cover information as numerical features and a supervised classification framework, automating the previous labour- and time-consuming rule-based approach used as reference. The second advances the state of the art incorporating Dempster–Shafer evidential theory and fuzzy sets, and proves successful in handling uncertainties from missing data or vague rules and offering wide user defined parameterization potential. Both approaches outperform the reference study in classification accuracy, proving promising for biodiversity monitoring, ecosystem preservation, and sustainability management tasks.Open Acces

Correction on “Towards Detecting Swath Events in TerraSAR-X Time Series to Establish NATURA 2000 Grassland Habitat Swath Management as Monitoring Parameter”

We found a mistake in the swath detection rule in Section 2.4 [1]. Specifically, the percent deviation calculation in the definition of the signal changes D1 and D2 and axiom A2 are altered. The correct version shall be: Consequently, the proposed rule for the detection of swath events consists of two axioms (A1 and A2) that need to be satisfied. For the signal backscatter (σ°) at a specific acquisition order number (k) of the acquired scene in the time series (N), the positive or negative signal changes in percent deviation for the first (D1) and second (D2) acquisition after a potential swath event are considered as: [...