20,043 research outputs found
TVL<sub>1</sub> Planarity Regularization for 3D Shape Approximation
The modern emergence of automation in many industries has given impetus to extensive research into mobile robotics. Novel perception technologies now enable cars to drive autonomously, tractors to till a field automatically and underwater robots to construct pipelines. An essential requirement to facilitate both perception and autonomous navigation is the analysis of the 3D environment using sensors like laser scanners or stereo cameras. 3D sensors generate a very large number of 3D data points when sampling object shapes within an environment, but crucially do not provide any intrinsic information about the environment which the robots operate within.
This work focuses on the fundamental task of 3D shape reconstruction and modelling from 3D point clouds. The novelty lies in the representation of surfaces by algebraic functions having limited support, which enables the extraction of smooth consistent implicit shapes from noisy samples with a heterogeneous density. The minimization of total variation of second differential degree makes it possible to enforce planar surfaces which often occur in man-made environments. Applying the new technique means that less accurate, low-cost 3D sensors can be employed without sacrificing the 3D shape reconstruction accuracy
Technology assessment of advanced automation for space missions
Six general classes of technology requirements derived during the mission definition phase of the study were identified as having maximum importance and urgency, including autonomous world model based information systems, learning and hypothesis formation, natural language and other man-machine communication, space manufacturing, teleoperators and robot systems, and computer science and technology
Method of optimization of the fundamental matrix by technique speeded up robust features application of different stress images
The purpose of determining the fundamental matrix (F) is to define the epipolar geometry and to relate two 2D images of the same scene or video series to find the 3D scenes. The problem we address in this work is the estimation of the localization error and the processing time. We start by comparing the following feature extraction techniques: Harris, features from accelerated segment test (FAST), scale invariant feature transform (SIFT) and speed-up robust features (SURF) with respect to the number of detected points and correct matches by different changes in images. Then, we merged the best chosen by the objective function, which groups the descriptors by different regions in order to calculate ‘F’. Then, we applied the standardized eight-point algorithm which also automatically eliminates the outliers to find the optimal solution ‘F’. The test of our optimization approach is applied on the real images with different scene variations. Our simulation results provided good results in terms of accuracy and the computation time of ‘F’ does not exceed 900 ms, as well as the projection error of maximum 1 pixel, regardless of the modification
Vision Science and Technology at NASA: Results of a Workshop
A broad review is given of vision science and technology within NASA. The subject is defined and its applications in both NASA and the nation at large are noted. A survey of current NASA efforts is given, noting strengths and weaknesses of the NASA program
Remote systems development
Potential space missions of the nineties and the next century require that we look at the broad category of remote systems as an important means to achieve cost-effective operations, exploration and colonization objectives. This paper addresses such missions, which can use remote systems technology as the basis for identifying required capabilities which must be provided. The relationship of the space-based tasks to similar tasks required for terrestrial applications is discussed. The development status of the required technology is assessed and major issues which must be addressed to meet future requirements are identified. This includes the proper mix of humans and machines, from pure teleoperation to full autonomy; the degree of worksite compatibility for a robotic system; and the required design parameters, such as degrees-of-freedom. Methods for resolution are discussed including analysis, graphical simulation and the use of laboratory test beds. Grumman experience in the application of these techniques to a variety of design issues are presented utilizing the Telerobotics Development Laboratory which includes a 17-DOF robot system, a variety of sensing elements, Deneb/IRIS graphics workstations and control stations. The use of task/worksite mockups, remote system development test beds and graphical analysis are discussed with examples of typical results such as estimates of task times, task feasibility and resulting recommendations for design changes. The relationship of this experience and lessons-learned to future development of remote systems is also discussed
Recommended from our members
TVL<sub>1</sub>shape approximation from scattered 3D data
With the emergence in 3D sensors such as laser scanners and 3D reconstruction from cameras, large 3D point clouds can now be sampled from physical objects within a scene. The raw 3D samples delivered by these sensors however, contain only a limited degree of information about the environment the objects exist in, which means that further geometrical high-level modelling is essential. In addition, issues like sparse data measurements, noise, missing samples due to occlusion, and the inherently huge datasets involved in such representations makes this task extremely challenging. This paper addresses these issues by presenting a new 3D shape modelling framework for samples acquired from 3D sensor. Motivated by the success of nonlinear kernel-based approximation techniques in the statistics domain, existing methods using radial basis functions are applied to 3D object shape approximation. The task is framed as an optimization problem and is extended using non-smooth L1 total variation regularization. Appropriate convex energy functionals are constructed and solved by applying the Alternating Direction Method of Multipliers approach, which is then extended using Gauss-Seidel iterations. This significantly lowers the computational complexity involved in generating 3D shape from 3D samples, while both numerical and qualitative analysis confirms the superior shape modelling performance of this new framework compared with existing 3D shape reconstruction techniques
Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery
One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions
- …