Efficient medium access control protocol for vehicular ad-hoc networks

Intelligent transportation systems (ITS) have enjoyed a tremendous growth in the last decade and the advancement in communication technologies has played a big role behind the success of ITS. Inter-vehicle communication (IVC) is a critical requirement for ITS and due to the nature of communication, vehicular ad-hoc network technology (VANET) is the most suitable communication technology for inter-vehicle communications. In Practice, however, VANET poses some extreme challenges including dropping out of connections as the moving vehicle moves out of the coverage range, joining of new nodes moving at high speeds, dynamic change in topology and connectivity, time variability of signal strength, throughput and time delay. One of the most challenging issues facing vehicular networks lies in the design of efficient resource management schemes, due to the mobile nature of nodes, delay constraints for safety applications and interference. The main application of VANET in ITS lies in the exchange of safety messages between nodes. Moreover, as the wireless access in vehicular environment (WAVE) moves closer to reality, management of these networks is of increasing concern for ITS designers and other stakeholder groups. As such, management of resources plays a significant role in VANET and ITS. For resource management in VANET, a medium access control protocol is used, which makes sure that limited resources are distributed efficiently. In this thesis, an efficient Multichannel Cognitive MAC (MCM) is developed, which assesses the quality of channel prior to transmission. MCM employs dynamic channel allocation and negotiation algorithms to achieve a significant improvement in channel utilisation, system reliability, and delay constraints while simultaneously addressing Quality of Service. Moreover, modified access priority parameters and safety message acknowledgments will be used to improve the reliability of safety messages. The proposed protocols are implemented using network simulation tools. Extensive experiments demonstrated a faster and more efficient reception of safety messages compared to existing VANET technologies. Finally, improvements in delay and packet delivery ratios are presented

Reliable and efficient data dissemination schemein VANET: a review

Vehicular ad-hoc network (VANET), identified as a mobile ad hoc network MANETs with several added constraints. Basically, in VANETs, the network is established on the fly based on the availability of vehicles on roads and supporting infrastructures along the roads, such as base stations. Vehicles and road-side infrastructures are required to provide communication facilities, particularly when enough vehicles are not available on the roads for effective communication. VANETs are crucial for providing a wide range of safety and non-safety applications to road users. However, the specific fundamental problem in VANET is the challenge of creating effective communication between two fast-moving vehicles. Therefore, message routing is an issue for many safety and non-safety of VANETs applications. The challenge in designing a robust but reliable message dissemination technique is primarily due to the stringent QoS requirements of the VANETs safety applications. This paper investigated various methods and conducted literature on an idea to develop a model for efficient and reliable message dissemination routing techniques in VANET

DABFS: A Robust Routing Protocol for Warning Messages Dissemination in VANETs

Vehicular ad hoc networks play a pivotal role in the enrichment of transportation systems by making them intelligent and capable of avoiding road accidents. For transmission of warning messages, direction-based Greedy protocols select the next hop based on the current location of relay nodes toward the destination node, which is an efficient approach for uni-directional traffic. However, such protocols experience performance degradation by neglecting the movement directions of nodes in bi-directional traffic where topological changes occur dynamically. This paper pioneers the use of movement direction and relative positions of source and destination nodes to cater to the dynamic nature of bi-directional highway environments for efficient and robust routing of warning messages. A novel routing protocol, namely, Direction Aware Best Forwarder Selection (DABFS), is presented in this paper. DABFS takes into account directions and relative positions of nodes, besides the distance parameter, to determine a node’s movement direction using Hamming distance and forwards warning messages through neighbor and best route discovery. Analytical and simulation results demonstrate that DABFS offers improved throughput and reduced packet loss rate and end-to-end delay, as compared with eminent routing protocols

A Framework for Incident Detection and notification in Vehicular Ad-Hoc Networks

The US Department of Transportation (US-DOT) estimates that over half of all congestion events are caused by highway incidents rather than by rush-hour traffic in big cities. The US-DOT also notes that in a single year, congested highways due to traffic incidents cost over $75 billion in lost worker productivity and over 8.4 billion gallons of fuel. Further, the National Highway Traffic Safety Administration (NHTSA) indicates that congested roads are one of the leading causes of traffic accidents, and in 2005 an average of 119 persons died each day in motor vehicle accidents. Recently, Vehicular Ad-hoc Networks (VANET) employing a combination of Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) wireless communication have been proposed to alert drivers to traffic events including accidents, lane closures, slowdowns, and other traffic-safety issues. In this thesis, we propose a novel framework for incident detection and notification dissemination in VANETs. This framework consists of three main components: a system architecture, a traffic incident detection engine and a notification dissemination mechanism. The basic idea of our framework is to collect and aggregate traffic-related data from passing cars and to use the aggregated information to detect traffic anomalies. Finally, the suitably filtered aggregated information is disseminated to alert drivers about traffic delays and incidents. The first contribution of this thesis is an architecture for the notification of traffic incidents, NOTICE for short. In NOTICE, sensor belts are embedded in the road at regular intervals, every mile or so. Each belt consists of a collection of pressure sensors, a simple aggregation and fusion engine, and a few small transceivers. The pressure sensors in each belt allow every message to be associated with a physical vehicle passing over that belt. Thus, no one vehicle can pretend to be multiple vehicles and then, is no need for an ID to be assigned to vehicles. Vehicles in NOTICE are fitted with a tamper-resistant Event Data Recorder (EDR), very much like the well-known black-boxes onboard commercial aircraft. EDRs are responsible for storing vehicles behavior between belts such as acceleration, deceleration and lane changes. Importantly, drivers can provide input to the EDR, using a simple menu, either through a dashboard console or through verbal input. The second contribution of this thesis is to develop incident detection techniques that use the information provided by cars in detecting possible incidents and traffic anomalies using intelligent inference techniques. For this purpose, we developed deterministic and probabilistic techniques to detect both blocking incidents, accidents for examples, as well as non-blocking ones such as potholes. To the best of our knowledge, our probabilistic technique is the first VANET based automatic incident detection technique that is capable of detecting both blocking and non blocking incidents. Our third contribution is to provide an analysis for vehicular traffic proving that VANETs tend to be disconnected in many highway scenarios, consisting of a collection of disjoint clusters. We also provide an analytical way to compute the expected cluster size and we show that clusters are quite stable over time. To the best of our knowledge, we are the first in the VANET community to prove analytically that disconnection is the norm rather than the exceptions in VANETs. Our fourth contribution is to develop data dissemination techniques specifically adapted to VANETs. With VANETs disconnection in mind, we developed data dissemination approaches that efficiently propagate messages between cars and belts on the road. We proposed two data dissemination techniques, one for divided roads and another one for undivided roads. We also proposed a probabilistic technique used by belts to determine how far should an incident notification be sent to alert approaching drivers. Our fifth contribution is to propose a security technique to avoid possible attacks from malicious drivers as well as preserving driver\u27s privacy in data dissemination and notification delivery in NOTICE. We also proposed a belt clustering scheme to reduce the probability of having a black-hole in the message dissemination while reducing also the operational burden if a belt is compromised

Road-based routing in vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) can provide scalable and cost-effective solutions for applications such as traffic safety, dynamic route planning, and context-aware advertisement using short-range wireless communication. To function properly, these applications require efficient routing protocols. However, existing mobile ad hoc network routing and forwarding approaches have limited performance in VANETs. This dissertation shows that routing protocols which account for VANET-specific characteristics in their designs, such as high density and constrained mobility, can provide good performance for a large spectrum of applications. This work proposes a novel class of routing protocols as well as three forwarding optimizations for VANETs. The Road-Based using Vehicular Traffic (RBVT) routing is a novel class of routing protocols for VANETs. RBVT protocols leverage real-time vehicular traffic information to create stable road-based paths consisting of successions of road intersections that have, with high probability, network connectivity among them. Evaluations of RBVT protocols working in conjunction with geographical forwarding show delivery rate increases as much as 40% and delay decreases as much as 85% when compared with existing protocols. Three optimizations are proposed to increase forwarding performance. First, one- hop geographical forwarding is improved using a distributed receiver-based election of next hops, which leads to as much as 3 times higher delivery rates in highly congested networks. Second, theoretical analysis and simulation results demonstrate that the delay in highly congested networks can be reduced by half by switching from traditional FIFO with Taildrop queuing to LIFO with Frontdrop queuing. Third, nodes can determine suitable times to transmit data across RBVT paths or proactively replace routes before they break using analytical models that accurately predict the expected road-based path durations in VANETs

Quality of service aware data dissemination in vehicular Ad Hoc networks

Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

A survey on probabilistic broadcast schemes for wireless ad hoc networks

Broadcast or flooding is a dissemination technique of paramount importance in wireless ad hoc networks. The broadcast scheme is widely used within routing protocols by a wide range of wireless ad hoc networks such as mobile ad hoc networks, vehicular ad hoc networks, and wireless sensor networks, and used to spread emergency messages in critical scenarios after a disaster scenario and/or an accidents. As the type broadcast scheme used plays an important role in the performance of the network, it has to be selected carefully. Though several types of broadcast schemes have been proposed, probabilistic broadcast schemes have been demonstrated to be suitable schemes for wireless ad hoc networks due to a range of benefits offered by them such as low overhead, balanced energy consumption, and robustness against failures and mobility of nodes. In the last decade, many probabilistic broadcast schemes have been proposed by researchers. In addition to reviewing the main features of the probabilistic schemes found in the literature, we also present a classification of the probabilistic schemes, an exhaustive review of the evaluation methodology including their performance metrics, types of network simulators, their comparisons, and present some examples of real implementations, in this paper

Smart handoff technique for internet of vehicles communication using dynamic edge-backup node

© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin

Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems

[EN] Intelligent Transportation Systems (ITS) can make transportation safer, more efficient, and more sustainable by applying various information and communication technologies. One of these technologies are \acfp{VN}. \acp{VN} combine different communication solutions such as cellular networks, \acfp{VANET}, or IEEE 802.11 technologies to provide connectivity among vehicles, and between vehicles and road infrastructure. This thesis focuses on VNs, and considers that the high speed of the nodes and the presence of obstacles like buildings, produces a highly variable network topology, as well as more frequent partitions in the network. Therefore, classical \ac{MANET} protocols do not adapt well to VANETs. Under these conditions, \ac{DTN} have been proposed as an alternative able to cope with these adverse characteristics. In DTN, when a message cannot be routed to its destination, it is not immediately dropped but it is instead stored and carried until a new route becomes available. The combination of VN and DTN is called \acp{VDTN}. In this thesis, we propose a new VDTN protocol designed to collect information from vehicular sensors. Our proposal, called \ac{MSDP}, combines information about the localization obtained from a GNSS system with the actual street/road layout obtained from a Navigation System (NS) to define a new routing metric. Both analytical and simulation results prove that MSDP outperforms previous proposals. Concerning the deployment of VNs and VANET technologies, technology already left behind the innovation and the standardization phases, and it is about time it reach the first early adopters in the market. However, most car manufacturers have decided to implement VN devices in the form of On Board Units (OBUs), which are expensive, heavily manufacturer dependent, and difficult to upgrade. These facts are delaying the deployment of VN. To boost this process, we have developed the GRCBox architecture. This architecture is based on low-cost devices and enables the establishment of V2X, \emph{i.e.} V2I and V2V, communications while integrating users by easing the use of general purpose devices like smartphones, tablets or laptops. To demonstrate the viability of the GRCBox architecture, we combined it with a DTN platform called Scampi to obtain actual results over a real VDTN scenario. We also present several GRCBox-aware applications that illustrate how developers can create applications that bring the potential of VN to user devices.[ES] Los sistemas de transporte inteligente (ITS) son el soporte para el establecimiento de un transporte más seguro, más eficiente y más sostenible mediante el uso de tecnologías de la información y las comunicaciones. Una de estas tecnologías son las redes vehiculares (VNs). Las VNs combinan diferentes tecnologías de comunicación como las redes celulares, las redes ad-hoc vehiculares (VANETs) o las redes 802.11p para proporcionar conectividad entre vehículos, y entre vehículos y la infraestructura de carreteras. Esta tesis se centra en las VNs, en las cuales la alta velocidad de los nodos y la presencia de obstáculos como edificios producen una topología de red altamente variable, así como frecuentes particiones en la red. Debido a estas características, los protocolos para redes móviles ad-hoc (MANETs) no se adaptan bien a las VANETs. En estas condiciones, las redes tolerantes a retardos (DTNs) se han propuesto como una alternativa capaz de hacer frente a estos problemas. En DTN, cuando un mensaje no puede ser encaminado hacia su destino, no es inmediatamente descartado sino es almacenado hasta que una nueva ruta esta disponible. Cuando las VNs y las DTNs se combinan surgen las redes vehiculares tolerantes a retardos (VDTN). En esta tesis proponemos un nuevo protocolo para VDTNs diseñado para recolectar la información generada por sensores vehiculares. Nuestra propuesta, llamada MSDP, combina la información obtenida del servicio de información geográfica (GIS) con el mapa real de las calles obtenido del sistema de navegación (NS) para definir una nueva métrica de encaminamiento. Resultados analíticos y mediante simulaciones prueban que MSDP mejora el rendimiento de propuestas anteriores. En relación con el despliegue de las VNs y las tecnologías VANET, la tecnología ha dejado atrás las fases de innovación y estandarización, ahora es el momento de alcanzar a los primeros usuarios del mercado. Sin embargo, la mayoría de fabricantes han decidido implementar los dispositivos para VN como unidades de a bordo (OBU), las cuales son caras y difíciles de actualizar. Además, las OBUs son muy dependientes del fabricante original. Todo esto esta retrasando el despliegue de las VNs. Para acelerar la adopción de las VNs, hemos desarrollado la arquitectura GRCBox. La arquitectura GRCBox esta basada en un dispositivo de bajo coste que permite a los usuarios usar comunicaciones V2X (V2V y V2I) mientras utilizan dispositivos de propósito general como teléfonos inteligentes, tabletas o portátiles. Las pruebas incluidas en esta tesis demuestran la viabilidad de la arquitectura GRCBox. Mediante la combinación de nuestra GRCBox y una plataforma de DTN llamada Scampi hemos diseñado y probado un escenario VDTN real. También presentamos como los desarrolladores pueden crear nuevas aplicaciones GRCBox para llevar el potencial de las VN a los dispositivos de usuario.[CA] Els sistemes de transport intel·ligent (ITS) poden crear un transport més segur, més eficient i més sostenible mitjançant l'ús de tecnologies de la informació i les comunicacions aplicades al transport. Una d'aquestes tecnologies són les xarxes vehiculars (VN). Les VN combinen diferents tecnologies de comunicació, com ara les xarxes cel·lulars, les xarxes ad-hoc vehiculars (VANET) o les xarxes 802.11p, per a proporcionar comunicació entre vehicles, i entre vehicles i la infraestructura de carreteres. Aquesta tesi se centra en les VANET, en les quals l'alta velocitat dels nodes i la presència d'obstacles, com els edificis, produeixen una topologia de xarxa altament variable, i també freqüents particions en la xarxa. Per aquest motiu, els protocols per a xarxes mòbils ad-hoc (MANET) no s'adapten bé. En aquestes condicions, les xarxes tolerants a retards (DTN) s'han proposat com una alternativa capaç de fer front a aquests problemes. En DTN, quan un missatge no pot ser encaminat cap a la seua destinació, no és immediatament descartat sinó que és emmagatzemat fins que apareix una ruta nova. Quan les VN i les DTN es combinen sorgeixen les xarxes vehicular tolerants a retards (VDTN). En aquesta tesi proposem un nou protocol per a VDTN dissenyat per a recol·lectar la informació generada per sensors vehiculars. La nostra proposta, anomenada MSDP, combina la informació obtinguda del servei d'informació geogràfica (GIS) amb el mapa real dels carrers obtingut del sistema de navegació (NS) per a definir una nova mètrica d'encaminament. Resultats analítics i mitjançant simulacions proven que MSDP millora el rendiment de propostes prèvies. En relació amb el desplegament de les VN i les tecnologies VANET, la tecnologia ha deixat arrere les fases d'innovació i estandardització, ara és temps d'aconseguir als primers usuaris del mercat. No obstant això, la majoria de fabricants han decidit implementar els dispositius per a VN com a unitats de bord (OBU), les quals són cares i difícils d'actualitzar. A més, les OBU són molt dependents del fabricant original. Tot això està retardant el desplegament de les VN. Per a accelerar l'adopció de les VN, hem desenvolupat l'arquitectura GRCBox. L'arquitectura GRCBox està basada en un dispositiu de baix cost que permet als usuaris usar comunicacions V2V mentre usen dispositius de propòsit general, com ara telèfons intel·ligents, tauletes o portàtils. Les proves incloses en aquesta tesi demostren la viabilitat de l'arquitectura GRCBox. Mitjançant la combinació de la nostra GRCBox i la plataforma de DTN Scampi, hem dissenyat i provat un escenari VDTN pràctic. També presentem com els desenvolupadors poden crear noves aplicacions GRCBox per a portar el potencial de les VN als dispositius d'usuari.Martínez Tornell, S. (2016). Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/68486TESI