Microprocessor and FPGA interfaces for in-system co-debugging in field programmable hybrid systems

Modern trends in technology require efficient control and processing platforms based on connected software-hardware subsystems. Due to their complexity and size, algorithms implemented on these platforms are difficult to test and verify. When these types of solution are being designed, it is necessary to provide information of the internal values of registers and memories of both the software and hardware during the execution of the complete system. The final architecture of the targeted design and its debugging capabilities strongly depends on how the hybrid system is connected and clocked. This article discusses different architectural strategies that have been adopted for a hybrid hardware-software platform, built ready for debugging, and that uses components that can be easily found with a few special features. All the solutions have been implemented and evaluated using the UNSHADES-2 framework

Automated Debugging Methodology for FPGA-based Systems

Electronic devices make up a vital part of our lives. These are seen from mobiles, laptops, computers, home automation, etc. to name a few. The modern designs constitute billions of transistors. However, with this evolution, ensuring that the devices fulfill the designer’s expectation under variable conditions has also become a great challenge. This requires a lot of design time and effort. Whenever an error is encountered, the process is re-started. Hence, it is desired to minimize the number of spins required to achieve an error-free product, as each spin results in loss of time and effort. Software-based simulation systems present the main technique to ensure the verification of the design before fabrication. However, few design errors (bugs) are likely to escape the simulation process. Such bugs subsequently appear during the post-silicon phase. Finding such bugs is time-consuming due to inherent invisibility of the hardware. Instead of software simulation of the design in the pre-silicon phase, post-silicon techniques permit the designers to verify the functionality through the physical implementations of the design. The main benefit of the methodology is that the implemented design in the post-silicon phase runs many order-of-magnitude faster than its counterpart in pre-silicon. This allows the designers to validate their design more exhaustively. This thesis presents five main contributions to enable a fast and automated debugging solution for reconfigurable hardware. During the research work, we used an obstacle avoidance system for robotic vehicles as a use case to illustrate how to apply the proposed debugging solution in practical environments. The first contribution presents a debugging system capable of providing a lossless trace of debugging data which permits a cycle-accurate replay. This methodology ensures capturing permanent as well as intermittent errors in the implemented design. The contribution also describes a solution to enhance hardware observability. It is proposed to utilize processor-configurable concentration networks, employ debug data compression to transmit the data more efficiently, and partially reconfiguring the debugging system at run-time to save the time required for design re-compilation as well as preserve the timing closure. The second contribution presents a solution for communication-centric designs. Furthermore, solutions for designs with multi-clock domains are also discussed. The third contribution presents a priority-based signal selection methodology to identify the signals which can be more helpful during the debugging process. A connectivity generation tool is also presented which can map the identified signals to the debugging system. The fourth contribution presents an automated error detection solution which can help in capturing the permanent as well as intermittent errors without continuous monitoring of debugging data. The proposed solution works for designs even in the absence of golden reference. The fifth contribution proposes to use artificial intelligence for post-silicon debugging. We presented a novel idea of using a recurrent neural network for debugging when a golden reference is present for training the network. Furthermore, the idea was also extended to designs where golden reference is not present

Implementation of an AMIDAR-based Java Processor

This thesis presents a Java processor based on the Adaptive Microinstruction Driven Architecture (AMIDAR). This processor is intended as a research platform for investigating adaptive processor architectures. Combined with a configurable accelerator, it is able to detect and speed up hot spots of arbitrary applications dynamically. In contrast to classical RISC processors, an AMIDAR-based processor consists of four main types of components: a token machine, functional units (FUs), a token distribution network and an FU interconnect structure. The token machine is a specialized functional unit and controls the other FUs by means of tokens. These tokens are delivered to the FUs over the token distribution network. The tokens inform the FUs about what to do with input data and where to send the results. Data is exchanged among the FUs over the FU interconnect structure. Based on the virtual machine architecture defined by the Java bytecode, a total of six FUs have been developed for the Java processor, namely a frame stack, a heap manager, a thread scheduler, a debugger, an integer ALU and a floating-point unit. Using these FUs, the processor can already execute the SPEC JVM98 benchmark suite properly. This indicates that it can be employed to run a broad variety of applications rather than embedded software only. Besides bytecode execution, several enhanced features have also been implemented in the processor to improve its performance and usability. First, the processor includes an object cache using a novel cache index generation scheme that provides a better average hit rate than the classical XOR-based scheme. Second, a hardware garbage collector has been integrated into the heap manager, which greatly reduces the overhead caused by the garbage collection process. Third, thread scheduling has been realized in hardware as well, which allows it to be performed concurrently with the running application. Furthermore, a complete debugging framework has been developed for the processor, which provides powerful debugging functionalities at both software and hardware levels

SINGLE EVENT UPSET DETECTION IN FIELD PROGRAMMABLE GATE ARRAYS

The high-radiation environment in space can lead to anomalies in normal satellite operation. A major cause of concern to spacecraft-designers is the single event upset (SEU). SEUs can result in deviations from expected component behavior and are capable of causing irreversible damage to hardware. In particular, Field Programmable Gate Arrays (FPGAs) are known to be highly susceptible to SEUs. Radiation-hardened versions of such devices are associated with an increase in power consumption and cost in addition to being technologically inferior when compared to contemporary commercial-off-the-shelf (COTS) parts. This thesis consequently aims at exploring the option of using COTS FPGAs in satellite payloads. A framework is developed, allowing the SEU susceptibility of such a device to be studied. SEU testing is carried out in a software-simulated fault environment using a set of Java classes called JBits. A radiation detector module, to measure the radiation backdrop of the device, is also envisioned as part of the final design implementation

Trusted SoC Realization for Remote Dynamic IP Integration

Heutzutage bieten field-programmable gate arrays (FPGAs) enorme Rechenleistung und Flexibilität. Zudem sind sie oft auf einem einzigen Chip mit eingebetteten Multicore-Prozessoren, DSP-Engines und Speicher-Controllern integriert. Dadurch sind sie für große und komplexe Anwendungen geeignet. Gleichzeitig führten die Fortschritte auf dem Gebiet der High-Level-Synthese und die Verfügbarkeit standardisierter Schnittstellen (wie etwa das Advanced eXtensible Interface 4) zur Entwicklung spezialisierter und neuartiger Funktionalitäten durch Designhäuser. All dies schuf einen Bedarf für ein Outsourcing der Entwicklung oder die Lizenzierung von FPGA-IPs (Intellectual Property). Ein Pay-per-Use IP-Lizenzierungsmodell, bei dem diese IPs vor allen Marktteilnehmern geschützt sind, kommt den Entwicklern der IPs zugute. Außerdem handelt es sich bei den Entwicklern von FPGA-Systemen in der Regel um kleine bis mittlere Unternehmen, die in Bezug auf die Markteinführungszeit und die Kosten pro Einheit von einem solchen Lizenzierungsmodell profitieren können. Im akademischen Bereich und in der Industrie gibt es mehrere IP-Lizenzierungsmodelle und Schutzlösungen, die eingesetzt werden können, die jedoch mit zahlreichen Sicherheitsproblemen behaftet sind. In einigen Fällen verursachen die vorgeschlagenen Sicherheitsmaßnahmen einen unnötigen Ressourcenaufwand und Einschränkungen für die Systementwickler, d. h., sie können wesentliche Funktionen ihres Geräts nicht nutzen. Darüber hinaus lassen sie zwei funktionale Herausforderungen außer Acht: das Floorplanning der IP auf der programmierbaren Logik (PL) und die Generierung des Endprodukts der IP (Bitstream) unabhängig vom Gesamtdesign. In dieser Arbeit wird ein Pay-per-Use-Lizenzierungsschema vorgeschlagen und unter Verwendung eines security framework (SFW) realisiert, um all diese Herausforderungen anzugehen. Das vorgestellte Schema ist pragmatisch, weniger restriktiv für Systementwickler und bietet Sicherheit gegen IP-Diebstahl. Darüber hinaus werden Maßnahmen ergriffen, um das System vor einem IP zu schützen, das bösartige Schaltkreise enthält. Das „Secure Framework“ umfasst ein vertrauenswürdiges Betriebssystem, ein reichhaltiges Betriebssystem, mehrere unterstützende Komponenten (z. B. TrustZone- Logik, gegen Seitenkanalangriffe (SCA) resistente Entschlüsselungsschaltungen) und Softwarekomponenten, z. B. für die Bitstromanalyse. Ein Gerät, auf dem das SFW läuft, kann als vertrauenswürdiges Gerät betrachtet werden, das direkt mit einem Repository oder einem IP-Core-Entwickler kommunizieren kann, um IPs in verschlüsselter Form zu erwerben. Die Entschlüsselung und Authentifizierung des IPs erfolgt auf dem Gerät, was die Angriffsfläche verringert und es weniger anfällig für IP-Diebstahl macht. Außerdem werden Klartext-IPs in einem geschützten Speicher des vertrauenswürdigen Betriebssystems abgelegt. Das Klartext-IP wird dann analysiert und nur dann auf der programmierbaren Logik konfiguriert, wenn es authentisch ist und keine bösartigen Schaltungen enthält. Die Bitstrom-Analysefunktionalität und die SFW-Unterkomponenten ermöglichen die Partitionierung der PL-Ressourcen in sichere und unsichere Ressourcen, d. h. die Erweiterung desKonzepts der vertrauenswürdigen Ausführungsumgebung (TEE) auf die PL. Dies ist die erste Arbeit, die das TEE-Konzept auf die programmierbare Logik ausweitet. Bei der oben erwähnten SCA-resistenten Entschlüsselungsschaltung handelt es sich um die Implementierung des Advanced Encryption Standard, der so modifiziert wurde, dass er gegen elektromagnetische und stromverbrauchsbedingte Leckagen resistent ist. Das geschützte Design verfügt über zwei Gegenmaßnahmen, wobei die erste auf einer Vielzahl unterschiedler Implementierungsvarianten und veränderlichen Zielpositionen bei der Konfiguration basiert, während die zweite nur unterschiedliche Implementierungsvarianten verwendet. Diese Gegenmaßnahmen sind auch während der Laufzeit skalierbar. Bei der Bewertung werden auch die Auswirkungen der Skalierbarkeit auf den Flächenbedarf und die Sicherheitsstärke berücksichtigt. Darüber hinaus wird die zuvor erwähnte funktionale Herausforderung des IP Floorplanning durch den Vorschlag eines feinkörnigen Automatic Floorplanners angegangen, der auf gemischt-ganzzahliger linearer Programmierung basiert und aktuelle FPGAGenerationen mit größeren und komplexen Bausteine unterstützt. Der Floorplanner bildet eine Reihe von IPs auf dem FPGA ab, indem er präzise rekonfigurierbare Regionen schafft. Dadurch werden die verbleibenden verfügbaren Ressourcen für das Gesamtdesign maximiert. Die zweite funktionale Herausforderung besteht darin, dass die vorhandenen Tools keine native Funktionalität zur Erzeugung von IPs in einer eigenständigen Umgebung bieten. Diese Herausforderung wird durch den Vorschlag eines unabhängigen IP-Generierungsansatzes angegangen. Dieser Ansatz kann von den Marktteilnehmern verwendet werden, um IPs eines Entwurfs unabhängig vom Gesamtentwurf zu generieren, ohne die Kompatibilität der IPs mit dem Gesamtentwurf zu beeinträchtigen

Hardware Fault Injection

Hardware fault injection is the widely accepted approach to evaluate the behavior of a circuit in the presence of faults. Thus, it plays a key role in the design of robust circuits. This chapter presents a comprehensive review of hardware fault injection techniques, including physical and logical approaches. The implementation of effective fault injection systems is also analyzed. Particular emphasis is made on the recently developed emulation-based techniques, which can provide large flexibility along with unprecedented levels of performance. These capabilities provide a way to tackle reliability evaluation of complex circuits.Publicad

Validation and verification of the interconnection of hardware intellectual property blocks for FPGA-based packet processing systems

As networks become more versatile, the computational requirement for supporting additional functionality increases. The increasing demands of these networks can be met by Field Programmable Gate Arrays (FPGA), which are an increasingly popular technology for implementing packet processing systems. The fine-grained parallelism and density of these devices can be exploited to meet the computational requirements and implement complex systems on a single chip. However, the increasing complexity of FPGA-based systems makes them susceptible to errors and difficult to test and debug. To tackle the complexity of modern designs, system-level languages have been developed to provide abstractions suited to the domain of the target system. Unfortunately, the lack of formality in these languages can give rise to errors that are not caught until late in the design cycle. This thesis presents three techniques for verifying and validating FPGA-based packet processing systems described in a system-level description language. First, a type system is applied to the system description language to detect errors before implementation. Second, system-level transaction monitoring is used to observe high-level events on-chip following implementation. Third, the high-level information embodied in the system description language is exploited to allow the system to be automatically instrumented for on-chip monitoring. This thesis demonstrates that these techniques catch errors which are undetected by traditional verification and validation tools. The locations of faults are specified and errors are caught earlier in the design flow, which saves time by reducing synthesis iterations

Dynamic reconfiguration frameworks for high-performance reliable real-time reconfigurable computing

The sheer hardware-based computational performance and programming flexibility offered by reconfigurable hardware like Field-Programmable Gate Arrays (FPGAs) make them attractive for computing in applications that require high performance, availability, reliability, real-time processing, and high efficiency. Fueled by fabrication process scaling, modern reconfigurable devices come with ever greater quantities of on-chip resources, allowing a more complex variety of applications to be developed. Thus, the trend is that technology giants like Microsoft, Amazon, and Baidu now embrace reconfigurable computing devices likes FPGAs to meet their critical computing needs. In addition, the capability to autonomously reprogramme these devices in the field is being exploited for reliability in application domains like aerospace, defence, military, and nuclear power stations. In such applications, real-time computing is important and is often a necessity for reliability. As such, applications and algorithms resident on these devices must be implemented with sufficient considerations for real-time processing and reliability. Often, to manage a reconfigurable hardware device as a computing platform for a multiplicity of homogenous and heterogeneous tasks, reconfigurable operating systems (ROSes) have been proposed to give a software look to hardware-based computation. The key requirements of a ROS include partitioning, task scheduling and allocation, task configuration or loading, and inter-task communication and synchronization. Existing ROSes have met these requirements to varied extents. However, they are limited in reliability, especially regarding the flexibility of placing the hardware circuits of tasks on device’s chip area, the problem arising more from the partitioning approaches used. Indeed, this problem is deeply rooted in the static nature of the on-chip inter-communication among tasks, hampering the flexibility of runtime task relocation for reliability. This thesis proposes the enabling frameworks for reliable, available, real-time, efficient, secure, and high-performance reconfigurable computing by providing techniques and mechanisms for reliable runtime reconfiguration, and dynamic inter-circuit communication and synchronization for circuits on reconfigurable hardware. This work provides task configuration infrastructures for reliable reconfigurable computing. Key features, especially reliability-enabling functionalities, which have been given little or no attention in state-of-the-art are implemented. These features include internal register read and write for device diagnosis; configuration operation abort mechanism, and tightly integrated selective-area scanning, which aims to optimize access to the device’s reconfiguration port for both task loading and error mitigation. In addition, this thesis proposes a novel reliability-aware inter-task communication framework that exploits the availability of dedicated clocking infrastructures in a typical FPGA to provide inter-task communication and synchronization. The clock buffers and networks of an FPGA use dedicated routing resources, which are distinct from the general routing resources. As such, deploying these dedicated resources for communication sidesteps the restriction of static routes and allows a better relocation of circuits for reliability purposes. For evaluation, a case study that uses a NASA/JPL spectrometer data processing application is employed to demonstrate the improved reliability brought about by the implemented configuration controller and the reliability-aware dynamic communication infrastructure. It is observed that up to 74% time saving can be achieved for selective-area error mitigation when compared to state-of-the-art vendor implementations. Moreover, an improvement in overall system reliability is observed when the proposed dynamic communication scheme is deployed in the data processing application. Finally, one area of reconfigurable computing that has received insufficient attention is security. Meanwhile, considering the nature of applications which now turn to reconfigurable computing for accelerating compute-intensive processes, a high premium is now placed on security, not only of the device but also of the applications, from loading to runtime execution. To address security concerns, a novel secure and efficient task configuration technique for task relocation is also investigated, providing configuration time savings of up to 32% or 83%, depending on the device; and resource usage savings in excess of 90% compared to state-of-the-art