Some aspects of traffic control and performance evaluation of ATM networks

The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation

Performance analysis of an asynchronous transfer mode multiplexer with Markov modulated inputs

Ankara : Department of Electrical and Electronics Engineering and the Institute of Engineering and Science of Bilkent University, 1993.Thesis (Ph.D.) -- Bilkent Iniversity, 1993.Includes bibliographical references leaves 108-113.Asynchronous Transfer Mode (ATM) networks have inputs which consist of superpositions of correlated cell streams. Markov modulated processes are commonly used to characterize this correlation. The first step through gaining an analytical insight in the performance issues of an ATM network is the analysis of a single channel. One objective of this study is the performance analysis of an ATM multiplexer whose input is a Markov modulated periodic arrival process. Based on the transient behavior of the nD/D/1 queue, we present an approximate method to compute the queue length distribution accurately. The method reduces to the solution of a linear differential equation with variable coefficients. Another general traffic model is the Markov Modulated Poisson Process (MMPP). We employ Pade approximations in transform domain for the deterministic service time distribution in an M MPP/D/1 queue so as to compute the distribution of the buffer occupancy. For both models, we also provide algorithms for analysis in the case of finite queue capacities and for computation of effective bandwidth.Akar, NailPh.D

Performance modelling with adaptive hidden Markov models and discriminatory processor sharing queues

In modern computer systems, workload varies at different times and locations. It is important to model the performance of such systems via workload models that are both representative and efficient. For example, model-generated workloads represent realistic system behaviour, especially during peak times, when it is crucial to predict and address performance bottlenecks. In this thesis, we model performance, namely throughput and delay, using adaptive models and discrete queues. Hidden Markov models (HMMs) parsimoniously capture the correlation and burstiness of workloads with spatiotemporal characteristics. By adapting the batch training of standard HMMs to incremental learning, online HMMs act as benchmarks on workloads obtained from live systems (i.e. storage systems and financial markets) and reduce time complexity of the Baum-Welch algorithm. Similarly, by extending HMM capabilities to train on multiple traces simultaneously it follows that workloads of different types are modelled in parallel by a multi-input HMM. Typically, the HMM-generated traces verify the throughput and burstiness of the real data. Applications of adaptive HMMs include predicting user behaviour in social networks and performance-energy measurements in smartphone applications. Equally important is measuring system delay through response times. For example, workloads such as Internet traffic arriving at routers are affected by queueing delays. To meet quality of service needs, queueing delays must be minimised and, hence, it is important to model and predict such queueing delays in an efficient and cost-effective manner. Therefore, we propose a class of discrete, processor-sharing queues for approximating queueing delay as response time distributions, which represent service level agreements at specific spatiotemporal levels. We adapt discrete queues to model job arrivals with distributions given by a Markov-modulated Poisson process (MMPP) and served under discriminatory processor-sharing scheduling. Further, we propose a dynamic strategy of service allocation to minimise delays in UDP traffic flows whilst maximising a utility function.Open Acces

Dependence-driven techniques in system design

Burstiness in workloads is often found in multi-tier architectures, storage systems, and communication networks. This feature is extremely important in system design because it can significantly degrade system performance and availability. This dissertation focuses on how to use knowledge of burstiness to develop new techniques and tools for performance prediction, scheduling, and resource allocation under bursty workload conditions.;For multi-tier enterprise systems, burstiness in the service times is catastrophic for performance. Via detailed experimentation, we identify the cause of performance degradation on the persistent bottleneck switch among various servers. This results in an unstable behavior that cannot be captured by existing capacity planning models. In this dissertation, beyond identifying the cause and effects of bottleneck switch in multi-tier systems, we also propose modifications to the classic TPC-W benchmark to emulate bursty arrivals in multi-tier systems.;This dissertation also demonstrates how burstiness can be used to improve system performance. Two dependence-driven scheduling policies, SWAP and ALoC, are developed. These general scheduling policies counteract burstiness in workloads and maintain high availability by delaying selected requests that contribute to burstiness. Extensive experiments show that both SWAP and ALoC achieve good estimates of service times based on the knowledge of burstiness in the service process. as a result, SWAP successfully approximates the shortest job first (SJF) scheduling without requiring a priori information of job service times. ALoC adaptively controls system load by infinitely delaying only a small fraction of the incoming requests.;The knowledge of burstiness can also be used to forecast the length of idle intervals in storage systems. In practice, background activities are scheduled during system idle times. The scheduling of background jobs is crucial in terms of the performance degradation of foreground jobs and the utilization of idle times. In this dissertation, new background scheduling schemes are designed to determine when and for how long idle times can be used for serving background jobs, without violating predefined performance targets of foreground jobs. Extensive trace-driven simulation results illustrate that the proposed schemes are effective and robust in a wide range of system conditions. Furthermore, if there is burstiness within idle times, then maintenance features like disk scrubbing and intra-disk data redundancy can be successfully scheduled as background activities during idle times

Performance analysis of error recovery and congestion control in high-speed networks

In the past few years, Broadband Integrated Services Digital Network (B-ISDN) has received increasing attention as a communication architecture capable of supporting multimedia applications. Among the techniques proposed to implement B-ISDN, Asynchronous Transfer Mode (ATM) is considered to be the most promising transfer technique because of its efficiency and flexibility.In ATM networks, the performance bottleneck of the network, which was once the channel transmission speed, is shifted to the processing speed at the network switching nodes and the propagation delay of the channel. This shift is because the high-speed channel increases the ratio of processing time to packet transmission time and also the ratio of propagation delay to packet transmission time. The increased processing overhead makes it difficult to implement hop-by-hop schemes, which may impose prohibitably high processing at each switching node. The increased propagation delay overhead makes traffic control in ATM a challenge since a large number of packets can be in transit between two ATM switching nodes. Because of these fundamental changes, control schemes developed for traditional networks may not perform efficiently, and thus, new network architectures (congestion control schemes, error control schemes, etc.) are required in ATM networks.In this dissertation, we first present an extensive survey of various traffic control schemes and network protocols for ATM networks. In this survey, possible traffic control schemes are examined, and problems of those schemes and their possible solutions are presented. Next, we investigate two key research issues in ATM networks (and other types of high-speed networks): the effects of protocol-processing overhead and the efficiency of traffic control schemes.We first investigate the effects of protocol-processing overhead on the performance of error recovery schemes. Specifically, we investigate the performance trade-offs between link-by-link and edge-to-edge error recovery schemes. Our results show that for a network with high-speed/low-error-rate channels, an edge-to-edge scheme gives a smaller delay than a link-by-link scheme. We then investigate the effectiveness of a priority packet discarding scheme, a congestion control mechanism suitable for high-speed networks. We derive loss probabilities for each stream and investigate the impact of burstiness of traffic streams on the performance of individual streams

Quality aspects of Internet telephony

Internet telephony has had a tremendous impact on how people communicate. Many now maintain contact using some form of Internet telephony. Therefore the motivation for this work has been to address the quality aspects of real-world Internet telephony for both fixed and wireless telecommunication. The focus has been on the quality aspects of voice communication, since poor quality leads often to user dissatisfaction. The scope of the work has been broad in order to address the main factors within IP-based voice communication. The first four chapters of this dissertation constitute the background material. The first chapter outlines where Internet telephony is deployed today. It also motivates the topics and techniques used in this research. The second chapter provides the background on Internet telephony including signalling, speech coding and voice Internetworking. The third chapter focuses solely on quality measures for packetised voice systems and finally the fourth chapter is devoted to the history of voice research. The appendix of this dissertation constitutes the research contributions. It includes an examination of the access network, focusing on how calls are multiplexed in wired and wireless systems. Subsequently in the wireless case, we consider how to handover calls from 802.11 networks to the cellular infrastructure. We then consider the Internet backbone where most of our work is devoted to measurements specifically for Internet telephony. The applications of these measurements have been estimating telephony arrival processes, measuring call quality, and quantifying the trend in Internet telephony quality over several years. We also consider the end systems, since they are responsible for reconstructing a voice stream given loss and delay constraints. Finally we estimate voice quality using the ITU proposal PESQ and the packet loss process. The main contribution of this work is a systematic examination of Internet telephony. We describe several methods to enable adaptable solutions for maintaining consistent voice quality. We have also found that relatively small technical changes can lead to substantial user quality improvements. A second contribution of this work is a suite of software tools designed to ascertain voice quality in IP networks. Some of these tools are in use within commercial systems today

Traffic matrix estimation in IP networks

An Origin-Destination (OD) traffic matrix provides a major input to the design, planning and management of a telecommunications network. Since the Internet is being proposed as the principal delivery mechanism for telecommunications traffic at the present time, and this network is not owned or managed by a single entity, there are significant challenges for network planners and managers needing to determine equipment and topology configurations for the various sections of the Internet that are currently the responsibility of ISPs and traditional telcos. Planning of these sub-networks typically requires a traffic matrix of demands that is then used to infer the flows on the administrator's network. Unfortunately, computation of the traffic matrix from measurements of individual flows is extremely difficult due to the fact that the problem formulation generally leads to the need to solve an under-determined system of equations. Thus, there has been a major effort from among researchers to obtain the traffic matrix using various inference techniques. The major contribution of this thesis is the development of inference techniques for traffic matrix estimation problem according to three different approaches, viz: (1) deterministic, (2) statistical, and (3) dynamic approaches. Firstly, for the deterministic approach, the traffic matrix estimation problem is formulated as a nonlinear optimization problem based on the generalized Kruithof approach which uses the Kullback distance to measure the probabilistic distance between two traffic matrices. In addition, an algorithm using the Affine scaling method is developed to solve the constrained optimization problem. Secondly, for the statistical approach, a series of traffic matrices are obtained by applying a standard deterministic approach. The components of these matrices represent estimates of the volumes of flows being exchanged between all pairs of nodes at the respective measurement points and they form a stochastic counting process. Then, a Markovian Arrival Process of order two (MAP-2) is applied to model the counting processes formed from this series of estimated traffic matrices. Thirdly, for the dynamic approach, the dual problem of the multi-commodity flow problem is formulated to obtain a set of link weights. The new weight set enables flows to be rerouted along new paths, which create new constraints to overcome the under-determined nature of traffic matrix estimation. Since a weight change disturbs a network, the impact of weight changes on the network is investigated by using simulation based on the well-known ns2 simulator package. Finally, we introduce two network applications that make use of the deterministic and the statistical approaches to obtain a traffic matrix respectively and also describe a scenario for the use of the dynamic approach

Packet level measurement over wireless access

PhDPerformance Measurement of the IP packet networks mainly comprise of monitoring the network performance in terms of packet losses and delays. If used appropriately, these network parameters (i.e. delay, loss and bandwidth etc) can indicate the performance status of the network and they can be used in fault and performance monitoring, network provisioning, and traffic engineering. Globally, there is a growing need for accurate network measurement to support the commercial use of IP networks. In wireless networks, transmission losses and communication delays strongly affect the performance of the network. Compared to wired networks, wireless networks experience higher levels of data dropouts, and corruption due to issues of channel fading, noise, interference and mobility. Performance monitoring is a vital element in the commercial future of broadband packet networking and the ability to guarantee quality of service in such networks is implicit in Service Level Agreements. Active measurements are performed by injecting probes, and this is widely used to determine the end to end performance. End to end delay in wired networks has been extensively investigated, and in this thesis we report on the accuracy achieved by probing for end to end delay over a wireless scenario. We have compared two probing techniques i.e. Periodic and Poisson probing, and estimated the absolute error for both. The simulations have been performed for single hop and multi- hop wireless networks. In addition to end to end latency, Active measurements have also been performed for packet loss rate. The simulation based analysis has been tried under different traffic scenarios using Poisson Traffic Models. We have sampled the user traffic using Periodic probing at different rates for single hop and multiple hop wireless scenarios. 5 Active probing becomes critical at higher values of load forcing the network to saturation much earlier. We have evaluated the impact of monitoring overheads on the user traffic, and show that even small amount of probing overhead in a wireless medium can cause large degradation in network performance. Although probing at high rate provides a good estimation of delay distribution of user traffic with large variance yet there is a critical tradeoff between the accuracy of measurement and the packet probing overhead. Our results suggest that active probing is highly affected by probe size, rate, pattern, traffic load, and nature of shared medium, available bandwidth and the burstiness of the traffic

Traffic control mechanisms with cell rate simulation for ATM networks.

PhDAbstract not availabl