20,485 research outputs found
Configurable 3D-integrated focal-plane sensor-processor array architecture
A mixed-signal Cellular Visual Microprocessor architecture with digital processors is
described. An ASIC implementation is also demonstrated. The architecture is composed of a
regular sensor readout circuit array, prepared for 3D face-to-face type integration, and one or
several cascaded array of mainly identical (SIMD) processing elements. The individual array
elements derived from the same general HDL description and could be of different in size, aspect
ratio, and computing resources
An AER Spike-Processing Filter Simulator and Automatic VHDL Generator Based on Cellular Automata
Spike-based systems are neuro-inspired circuits implementations
traditionally used for sensory systems or sensor signal processing. Address-Event-
Representation (AER) is a neuromorphic communication protocol for transferring
asynchronous events between VLSI spike-based chips. These neuro-inspired
implementations allow developing complex, multilayer, multichip neuromorphic
systems and have been used to design sensor chips, such as retinas and cochlea,
processing chips, e.g. filters, and learning chips. Furthermore, Cellular Automata
(CA) is a bio-inspired processing model for problem solving. This approach
divides the processing synchronous cells which change their states at the same time
in order to get the solution. This paper presents a software simulator able to gather
several spike-based elements into the same workspace in order to test a CA
architecture based on AER before a hardware implementation. Furthermore this
simulator produces VHDL for testing the AER-CA into the FPGA of the USBAER
AER-tool.Ministerio de Ciencia e InnovaciĂłn TEC2009-10639-C04-0
Digital implementation of the cellular sensor-computers
Two different kinds of cellular sensor-processor architectures are used nowadays in various
applications. The first is the traditional sensor-processor architecture, where the sensor and the
processor arrays are mapped into each other. The second is the foveal architecture, in which a
small active fovea is navigating in a large sensor array. This second architecture is introduced
and compared here. Both of these architectures can be implemented with analog and digital
processor arrays. The efficiency of the different implementation types, depending on the used
CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use
digital implementation rather than analog
Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals
Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve
CMOS-3D smart imager architectures for feature detection
This paper reports a multi-layered smart image sensor architecture for feature extraction based on detection of interest points. The architecture is conceived for 3-D integrated circuit technologies consisting of two layers (tiers) plus memory. The top tier includes sensing and processing circuitry aimed to perform Gaussian filtering and generate Gaussian pyramids in fully concurrent way. The circuitry in this tier operates in mixed-signal domain. It embeds in-pixel correlated double sampling, a switched-capacitor network for Gaussian pyramid generation, analog memories and a comparator for in-pixel analog-to-digital conversion. This tier can be further split into two for improved resolution; one containing the sensors and another containing a capacitor per sensor plus the mixed-signal processing circuitry. Regarding the bottom tier, it embeds digital circuitry entitled for the calculation of Harris, Hessian, and difference-of-Gaussian detectors. The overall system can hence be configured by the user to detect interest points by using the algorithm out of these three better suited to practical applications. The paper describes the different kind of algorithms featured and the circuitry employed at top and bottom tiers. The Gaussian pyramid is implemented with a switched-capacitor network in less than 50 ÎŒs, outperforming more conventional solutions.Xunta de Galicia 10PXIB206037PRMinisterio de Ciencia e InnovaciĂłn TEC2009-12686, IPT-2011-1625-430000Office of Naval Research N00014111031
Visual Spike-based Convolution Processing with a Cellular Automata Architecture
this paper presents a first approach for
implementations which fuse the Address-Event-Representation
(AER) processing with the Cellular Automata using FPGA and
AER-tools. This new strategy applies spike-based convolution
filters inspired by Cellular Automata for AER vision
processing. Spike-based systems are neuro-inspired circuits
implementations traditionally used for sensory systems or
sensor signal processing. AER is a neuromorphic
communication protocol for transferring asynchronous events
between VLSI spike-based chips. These neuro-inspired
implementations allow developing complex, multilayer,
multichip neuromorphic systems and have been used to design
sensor chips, such as retinas and cochlea, processing chips, e.g.
filters, and learning chips. Furthermore, Cellular Automata is a
bio-inspired processing model for problem solving. This
approach divides the processing synchronous cells which
change their states at the same time in order to get the solution.Ministerio de EducaciĂłn y Ciencia TEC2006-11730-C03-02Ministerio de Ciencia e InnovaciĂłn TEC2009-10639-C04-02Junta de AndalucĂa P06-TIC-0141
Concurrent focal-plane generation of compressed samples fromtime-encoded pixel values
Compressive sampling allows wrapping the relevant content of an image in a reduced set of data. It exploits the sparsity of natural images. This principle can be employed to deliver images over a network under a restricted data rate and still receive enough meaningful information. An efficient implementation of this principle lies in the generation of the compressed samples right at the imager. Otherwise, i. e. digitizing the complete image and then composing the compressed samples in the digital plane, the required memory and processing resources can seriously compromise the budget of an autonomous camera node. In this paper we present the design of a pixel architecture that encodes light intensity into time, followed by a global strategy to pseudo-randomly combine pixel values and generate, on-chip and on-line, the compressed samples.Ministerio de EconomĂa y Competitividad TEC 2015-66878-C3-1-RJunta de AndalucĂa TIC 2338-2013Office of Naval Research (USA) N000141410355CONACYT (Mexico) MZO-2017-29106
A micropower centroiding vision processor
Published versio
- âŠ