72 research outputs found
Recommended from our members
Stress and deformation characteristics of sea ice in a high-resolution, anisotropic sea ice model
The drift and deformation of sea ice floating on the polar oceans is caused by the applied wind and ocean currents. Over ocean basin length scales the internal stresses and boundary conditions of the sea ice pack result in observable deformation patterns. Cracks and leads can be observed in satellite images and within the velocity fields generated from floe tracking. In a climate sea ice model the deformation of sea ice over ocean basin length scales is modelled using a rheology that represents the relationship between stresses and deformation within the sea ice cover. Here we investigate the link between emergent deformation characteristics and the underlying internal sea ice stresses using the Los Alamos numerical sea ice climate model. We have developed an idealized square domain, focusing on the role of sea ice rheologies in producing deformation at spatial resolutions of up to 500âm. We use the elastic anisotropic plastic (EAP) and elastic viscous plastic (EVP) rheologies, comparing their stability, with the EAP rheology producing sharper deformation features than EVP at all space and time resolutions. Sea ice within the domain is forced by idealized winds, allowing for the emergence of five distinct deformation types. Two for a low confinement ratio: convergent and expansive stresses. Two about a critical confinement ratio: isotropic and anisotropic conditions. One for a high confinement ratio and isotropic sea ice. Using the EAP rheology and through the modification of initial conditions and forcing, we show the emergence of the power law of strain rate, in accordance with observations.This article is part of the theme issue 'Modelling of sea-ice phenomena'
MEMS tunable capacitors with fragmented electrodes and rotational electro-thermal drive
This paper reports on the design, simulation and fabrication of tunable MEMS capacitors with fragmented metal (AlSi 4%) electrodes. We examine a rotational electro-thermal actuation. An analytic model of the rotational effect thermal actuator was established in order to show the periodicity of the capacitance when the angle increases. Evaluation of the impact of fringing fields on the capacitance has been carried out using finite element analysis (FEA). The MEMS capacitors were fabricated using metal surface micromachining with polyimide sacrificial layer. The maximum rotation, corresponding to a maximum angle of 7°, was obtained near 1.2V and 299mA. The proposed capacitor has a practical tuning range of 30%. FEA has shown that this figure can be improved with design optimization. The MEMS architecture based on rotational effect and fragmented electrodes does not suffer from the pull in effect and offers a practical solution for future above-IC capacitor
Recommended from our members
Warm winter, thin ice?
Winter 2016/2017 saw record warmth over the Arctic Ocean, leading to the least amount of freezing degree days north of 70°âN since at least 1979. The impact of this warmth was evaluated using model simulations from the Los Alamos sea-ice model (CICE) and CryoSat-2 thickness estimates from three different data providers. While CICE simulations show a broad region of anomalously thin ice in April 2017 relative to the 2011â2017 mean, analysis of three CryoSat-2 products show more limited regions with thin ice and do not always agree with each other, both in magnitude and direction of thickness anomalies. CICE is further used to diagnose feedback processes driving the observed anomalies, showing 11â13âcm reduced thermodynamic ice growth over the Arctic domain used in this study compared to the 2011â2017 mean, and dynamical contributions of +1 to +4âcm. Finally, CICE model simulations from 1985â2017 indicate the negative feedback relationship between ice growth and winter air temperatures may be starting to weaken, showing decreased winter ice growth since 2012 as winter air temperatures have increased and the freeze-up has been further delayed
Stress response inside perturbed particle assemblies
The effect of structural disorder on the stress response inside three
dimensional particle assemblies is studied using computer simulations of
frictionless sphere packings. Upon applying a localised, perturbative force
within the packings, the resulting {\it Green's} function response is mapped
inside the different assemblies, thus providing an explicit view as to how the
imposed perturbation is transmitted through the packing. In weakly disordered
arrays, the resulting transmission of forces is of the double-peak variety, but
with peak widths scaling linearly with distance from the source of the
perturbation. This behaviour is consistent with an anisotropic elasticity
response profile. Increasing the disorder distorts the response function until
a single-peak response is obtained for fully disordered packings consistent
with an isotropic description.Comment: 8 pages, 7 figure captions To appear in Granular Matte
Phased response of the subpolar Southern Ocean to changes in circumpolar winds
The response of the subpolar Southern Ocean (sSO) to wind forcing is assessed using satellite radar altimetry. sSO sea level exhibits a phased, zonally coherent, bimodal adjustment to circumpolar wind changes, involving comparable seasonal and interannual variations. The adjustment is effected via a quasi-instantaneous exchange of mass between the Antarctic continental shelf and the sSO to the north, and a 2-month-delayed transfer of mass between the wider Southern Ocean and the subtropics. Both adjustment modes are consistent with an Ekman-mediated response to variations in surface stress. Only the fast mode projects significantly onto the surface geostrophic flow of the sSO; thus, the regional circulation varies in phase with the leading edge of sSO sea level variability. The surface forcing of changes in the sSO system is partly associated with variations of surface winds linked to the Southern Annular Mode and is modulated by sea ice cover near Antarctica
The kinetic fragility of liquids as manifestation of the elastic softening
We show that the fragility , the steepness of the viscosity and relaxation
time close to the vitrification, increases with the degree of elastic
softening, i.e. the decrease of the elastic modulus with increasing
temperature, in universal way. This provides a novel connection between the
thermodynamics, via the modulus, and the kinetics. The finding is evidenced by
numerical simulations and comparison with the experimental data of glassformers
with widely different fragilities (), leading to a
fragility-independent elastic master curve extending over eighteen decades in
viscosity and relaxation time. The master curve is accounted for by a cavity
model pointing out the roles of both the available free volume and the cage
softness. A major implication of our findings is that ultraslow relaxations,
hardly characterised experimentally, become predictable by linear elasticity.
As an example, the viscosity of supercooled silica is derived over about
fifteen decades with no adjustable parameters.Comment: 7 pages, 6 figures; Added new results, improved the theoretical
sectio
Wind redistribution of snow impacts the Ka- and Ku-band radar signatures of Arctic sea ice
Wind-driven redistribution of snow on sea ice alters its
topography and microstructure, yet the impact of these processes on radar
signatures is poorly understood. Here, we examine the effects of snow
redistribution over Arctic sea ice on radar waveforms and backscatter
signatures obtained from a surface-based, fully polarimetric Ka- and Ku-band
radar at incidence angles between 0â (nadir) and 50â.
Two wind events in November 2019 during the Multidisciplinary drifting Observatory for
the Study of Arctic Climate (MOSAiC) expedition are evaluated. During both events, changes in Ka- and
Ku-band radar waveforms and backscatter coefficients at nadir are observed,
coincident with surface topography changes measured by a terrestrial laser
scanner. At both frequencies, redistribution caused snow densification at
the surface and the uppermost layers, increasing the scattering at the
airâsnow interface at nadir and its prevalence as the dominant radar scattering surface. The waveform data also detected the presence of previous
airâsnow interfaces, buried beneath newly deposited snow. The additional
scattering from previous airâsnow interfaces could therefore affect the
range retrieved from Ka- and Ku-band satellite altimeters. With increasing
incidence angles, the relative scattering contribution of the airâsnow
interface decreases, and the snowâsea ice interface scattering increases.
Relative to pre-wind event conditions, azimuthally averaged backscatter at
nadir during the wind events increases by up to 8âdB (Ka-band) and 5âdB (Ku-band). Results show substantial backscatter variability within the scan
area at all incidence angles and polarizations, in response to increasing
wind speed and changes in wind direction. Our results show that snow
redistribution and wind compaction need to be accounted for to interpret
airborne and satellite radar measurements of snow-covered sea ice.</p
Retrieval of Snow Depth on Arctic Sea Ice From Surface-Based, Polarimetric, Dual-Frequency Radar Altimetry
Snow depth on sea ice is an Essential Climate Variable and a major source of uncertainty in satellite altimetry-derived sea ice thickness. During winter of the MOSAiC Expedition, the âKuKaâ dual-frequency, fully polarized Ku- and Ka-band radar was deployed in âstareâ nadir-looking mode to investigate the possibility of combining these two frequencies to retrieve snow depth. Three approaches were investigated: dual-frequency, dual-polarization and waveform shape, and compared to independent snow depth measurements. Novel dual-polarization approaches yielded r2 values up to 0.77. Mean snow depths agreed within 1 cm, even for data sub-banded to CryoSat-2 SIRAL and SARAL AltiKa bandwidths. Snow depths from co-polarized dual-frequency approaches were at least a factor of four too small and had a r2 0.15 or lower. r2 for waveform shape techniques reached 0.72 but depths were underestimated. Snow depth retrievals using polarimetric information or waveform shape may therefore be possible from airborne/satellite radar altimeters
SKIM, a candidate satellite mission exploring global ocean currents and waves
The Sea surface KInematics Multiscale monitoring (SKIM) satellite mission is designed to explore ocean surface current and waves. This includes tropical currents, notably the poorly known patterns of divergence and their impact on the ocean heat budget, and monitoring of the emerging Arctic up to 82.5°N. SKIM will also make unprecedented direct measurements of strong currents, from boundary currents to the Antarctic circumpolar current, and their interaction with ocean waves with expected impacts on air-sea fluxes and extreme waves. For the first time, SKIM will directly measure the ocean surface current vector from space. The main instrument on SKIM is a Ka-band conically scanning, multi-beam Doppler radar altimeter/wave scatterometer that includes a state-of-the-art nadir beam comparable to the Poseidon-4 instrument on Sentinel 6. The well proven Doppler pulse-pair technique will give a surface drift velocity representative of the top meter of the ocean, after subtracting a large wave-induced contribution. Horizontal velocity components will be obtained with an accuracy better than 7 cm/s for horizontal wavelengths larger than 80 km and time resolutions larger than 15 days, with a mean revisit time of 4 days for of 99% of the global oceans. This will provide unique and innovative measurements that will further our understanding of the transports in the upper ocean layer, permanently distributing heat, carbon, plankton, and plastics. SKIM will also benefit from co-located measurements of water vapor, rain rate, sea ice concentration, and wind vectors provided by the European operational satellite MetOp-SG(B), allowing many joint analyses. SKIM is one of the two candidate satellite missions under development for ESA Earth Explorer 9. The other candidate is the Far infrared Radiation Understanding and Monitoring (FORUM). The final selection will be announced by September 2019, for a launch in the coming decade
- âŠ